1621
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.5.1
|
on: May 28, 2018, 01:31:30 PM
|
information is gold. Reading this thread you get information. Some people would still miss it, but this could be in the original post: "Some users report higher hash-rates with RX580's on CN-Heavy algorithm when running GPU-Z in the background. Mileage may vary." I will put this right away in the tips section on first page
|
|
|
1624
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.5.1
|
on: May 28, 2018, 04:58:13 AM
|
my rig have a strange pattern, every 48 hours nontsop mining will get 90 Celcius shutdown , while my GPU not showing any burned effect , anyone know how to fixed this ?
i'm using SRB latest version.
had same issue when running SRB 1.5.1 on windows 1803 update. So when i rollback to 1709 windows 10, everything look fine.
So, if you updated to 1803 probably that's causing the problem, or worse if your gpu's are really getting to 90c. By default if not set "shutdown_temperature", is set to 90c. I will just disable this default setup, so if "shutdown_temperature" is not explicitly set in config, it wont be enabled and no more problems on 1803.
|
|
|
1626
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.5.1
|
on: May 27, 2018, 04:00:31 PM
|
Hello, I have the problem in between, the miner complained that he overheated and then want to restart. then the mining rig crashes. I have 5 Vega 64 in the rig and use version 1.5.5.1, do you have an idea? What's weird is that I have a second rig with 3 x Vega 64 and this is crashes at the same time. Sometimes the whole works without problems 3 days...
does it say "critical shutdown, temperature reach 90C" ?? i had same issue when running SRB 1.5.1 on windows 1803 update. So when i rollback to 1709 windows 10, everything look fine. have you checked, maybe it really reached 90c ?
|
|
|
1627
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.5.1
|
on: May 27, 2018, 12:24:43 PM
|
Hey Doctor
is it possible to do that miner show error messages in friendly english coding system and not depend on which one of languages of OS i use ? All other miners don't have that problem, it's hard to do that?
miner shows its own messages on english, but its works with some windows components (like ws2_32.dll) which return those messages.
|
|
|
1628
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.5.1
|
on: May 27, 2018, 08:51:15 AM
|
hi guys im using 1.5.3 srb
i still cant get set how to turn off auto fan
if i start mining it will always set auto
any help?
many thanks
what do you want to do ? Set fan speed ? yes im setting with msi ab but if i start srb it always set fan to auto in msi? do we have an option to set auto fan = false? hi doc, any clue?? thanks If you have set any of these, miner will take over control of fans : - target_temperature - target_fan_speed
|
|
|
1629
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.5.1
|
on: May 26, 2018, 07:51:02 PM
|
Maybe your RX470 have Samsung memory which allow for Hs rates above 1000 without many tricks. My RX580, they have hynix memory, which works well for Ethereum mining but not as well for Cryptonight mining. Anyway I am not giving up on SRB, it is just that it seems it needs more parameters than Cast and that it is a long learning curve. Cheers.
i never used cast, but looking at the parameters, how does one set intensity and stuff like that? I don't see any option for tuning or optimisation?
|
|
|
1630
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.5.1
|
on: May 26, 2018, 04:04:42 PM
|
Hello Doc,
Thank you for the wonderful miner.
I've upgraded two of my Vega64 rigs from 8 to 10 cards per rig, and had to ditch the blockchain driver in order to support 10 cards. With the new driver xmr-stak is not performing so well as with the blockchain driver, and I made a test between xmr-stak, cast-xmr and srb.
The results are excellent in favor of the SRB:
10 x Vega64 1408/950 GPU & 1100/950 MEM:
srb miner - 20100 h/s - 0.85% fee = 19930 total xmr-stak - 19454 h/s - 0% fee (I'm compiling my version with the dev fee removed, as 2% default is a bit high) = 19454 total cast-xmr - 19900 h/s - 1.5% fee = 19600 total
Also from the 3 miners only SRB continued to mine with 1 card crashed (with 9 of 10 cards), and the bus ID reorder made it very easily to find which card is this and to tune its mem down a bit.
So I want to thank you and congratulate you for the excellent miner. You also have a very reasonable dev fee so I'm planning to deploy the miner on all of my rigs.
I have the following feature request, that I will be very happy, if it could be addressed. Is it possible to add a pool priority (xmr stak has this option) so if the primary pool fails and the miner switches to the secondary pool, the miner to start to mine to the primary pool again when it's up again? Easy walkaround could be if that's hard to implement, to enable a scheduled pool reload (at this moment at the reload, the miner connects to the primary pool if it's not connected).
Regards
Hi and thank you for the kind words The feature you want is on the wishlist and soon it will be implemented, possibly in the next version.
|
|
|
1631
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.5.1
|
on: May 26, 2018, 03:58:35 PM
|
why do you guys use SRB miner instead of CAST? SRB does not offer any performance advantage, it is more complicate to set up and actually performance is very erratical, since any time you restart it, you may get a different hash rate, at least for me.
I have been using it for a couple of days on 2 rigs one with Vegas and the other with RX580 and I could not find any plus VS Cast. Just wondering if I am missing something.
im curious, which part is complicated to set up?
|
|
|
1639
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.5
|
on: May 24, 2018, 09:12:46 AM
|
I guess i know what's causing this, will fix it in next ver. You guys get a job timeout before this, am i right? Are you setting it manually in pools config? If not, can you try to put "job_timeout" : 900 , that is 15 minutes, and test to see if you still get timeouts and invalid job rejects? If no timeouts i will know this was the problem thanks example: pools.config{ "pools" : [ {"pool" : "xmr-eu1.nanopool.org:14444", "wallet" : "4A5hJyu2FvuM2azexYssHW2odrNCNWVqLLmzCowrA57xGJLNufXfzVgcMpAy3YWpzZSAPALhVH4Ed7x o6RZYyw2bUtbm12g.donation", "password" : "x" , "job_timeout" : 900} ] }
|
|
|
|