1662
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.4
|
on: May 19, 2018, 05:45:49 AM
|
Why if i'm stop mining and close SRBMiner, all GPU fan's is stopping. i'm always forgot to check this and i mine other's coin and my GPU overheating because of Fan stopped working
When closing miner it resets the fans back to default settings.That does not mean it stops them and they won't work anymore, just returned to default state.
|
|
|
1663
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.4
|
on: May 19, 2018, 05:42:08 AM
|
BEWARE the DEV fee will run for HOURS! Ive been using this for 3days straight noticed my pool showed me offline for 4hrs, checked the miners they were submitting shares and running fine scrolled up to 4hrs before and thats when the dev fee switched. it stated it finished and sent back to my mining work but it didnt. very sneaky. Check your miners often if you continue to use this sneaky software.
How about you check your pool? ?? what ?? did you read the beginning of my post? Using only 2 pool entry. both are directed at MRR with failover to another location of MRR. MRR showed offline for 4hrs, offline status occured exactly when dev fee started and my rigs steady submitted shares to an unspecified pool, connection was never reestablished with MRR even after the dev fee showed it was stopped. shares continued to be submitted for 4hrs and then reconnected back to MRR. Devfee shares are not displayed to the user, so what you saw submitted were not devfee shares. I don't know what happened there but don't you think if the miner was sneaky then you wouldn't be the only one reporting this?
|
|
|
1669
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.4
|
on: May 17, 2018, 12:28:17 PM
|
V1.5.4 - Added MarketCash algo - Total hashrate display fixed - Fixed hashrate display in log - Fixed watchdog GPU display if using reorder - Added parameter 'nicehash' in pool config, it forces nicehash protocol if true - If using '--adldisable', it won't show ADL related options anymore in hash display - Press 'r' while mining to reload pools - Added cmd parameters 'cpool, cwallet, cpassword, ctls, cnicehash' so user can define first (and maybe only) pool thru cmd parameters
+ If you are using a proxy->nicehash combination, you can now use parameter 'nicehash' : true in pools config + If you need to add a pool on the fly, you can do it now! Add a pool to the pools.txt file then press 'r' in the miner to reload them. + If you want to use only one pool, or it's important for you to define a pool thru command line, not in pools.txt, you can do it now. Example:
SRBMiner-CN.exe --config config.txt --cpool pool:port --cwallet yourwallet --cpassword yourpassword
These 3 parameters are enough, you can also use --ctls and --cnicehash if you want to use TLS or force nicehash.
You still need config.txt to set algo and other stuff. Also you can mix cmd line + pools.txt.
|
|
|
1672
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.3
|
on: May 16, 2018, 07:03:44 AM
|
Hey guys, I have 2 rigs with 5x RX570s each. One works perfectly with SRBMiner. For the other miner, only 4/5 cards work with SRBMiner. The other card gets and error "CL_INVALID_BINARY" at startup when compiling kernel.
What do I do here? I have had the issue card mining ETH and disabled in SRBMiner for now, but I want to move it to SRBMiner ideally. I tried reinstalling drivers, but that didn't work.
gpu model and driver version ? Also srbminer version? Sapphire Radeon RX 570 ITX 4GB 11266-06-20G 22.19.659.1 AMD drivers - I have 5 other of the same exact RX570 model working perfectly on this driver... Had to use this driver to unlock voltage control in afterburner SRBMiner V1.5.1 thanks in advance That error means the created opencl binary isn't valid for that device. Try deleting .srb files in miner directory so it will reacreate the binaries.
|
|
|
1674
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.3
|
on: May 14, 2018, 07:35:14 PM
|
Doc, I can confirm, that my RX580 cards with 8GB get a Hashrate drop after Pool switch / dev Pool. After start and close GPU-Z while miner is running, the max. Hashrate come back again.
Would be nice to implement the „Magic Function“ to the Miner :-)
Greetings from Germany Oliver
Hashrate shouldn't drop after devfee mining, because when switching do devfee pool, user pool is not disconnected, it's running in the background, and when devfee finishes it just takes work from user pool and continues hashing. User pool can lower difficulty because user is not sending shares for 1 minute, but i don't believe that should be a reason for the hashrate to drop. Also it would be nice to know what is gpuz doing
|
|
|
1675
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.3
|
on: May 13, 2018, 09:08:37 PM
|
Why has the speed of hashing dropped dramatically in recent versions?
Why lower the default intensity for some cards?
return it as it was)
Default intensity (when left on 0) really was lowered for some cards, because some users reported that the auto intensity is setting them too high values , so their gpu's crashed. All you have to do now is to set intensity by hand, which i think it's not too hard to do.
|
|
|
1679
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.3
|
on: May 13, 2018, 03:31:42 PM
|
Interesting, all that gpu-z does (or it should do ) is to run a few opencl queries, and some monitoring stuff. But who knows. I tried that suggestion to fire up gpu-z and it should improve hash on 580 8g cards on heavy, but that is not the case here. Here's an idea for you guys that gpu-z helps: try running --listdevices in a new console window while the miner is running in an other. So , do a : SRBMiner-CN.exe --listdevices This does some opencl queries, maybe some of those that help pumping the hashrate ?
|
|
|
|