|
1262
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.6 - with algo switching support
|
on: August 24, 2018, 07:16:59 AM
|
Doktor, can I give you an enhancement request please? === Sequential log files === (just like in Claymore's miner) The miner should generate a new, separate log file every time it starts. It makes troubleshooting soooooo much easier. Having to go through one huge ass logfile is such a pain in the ass. Thanks  I second this request. It seems like the log file gets overwritten on pc (and miner) restart (with miner auto start enabled via windows startup command), which I have to do sometimes when my pc hangs, so I can’t see what might be the cause. You can do this easily in the start.bat file, actually i will put that as default in the start.bat in next version. Make your .bat looks like this: setx GPU_MAX_HEAP_SIZE 100 setx GPU_MAX_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_MAX_SINGLE_ALLOC_PERCENT 100 @echo off cd %~dp0 cls set LOGTIME=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2% set LOGTIME=%LOGTIME: =% set LOGTIME=%LOGTIME:,=.%.txt set EXE=SRBMiner-CN.exe %EXE% --sendallstales --config config.txt --pools pools.txt --logfile %LOGTIME% |
|
|
|
|
1265
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.6 - with algo switching support
|
on: August 22, 2018, 09:46:06 AM
|
doktor83,
i have some problem with hashrate on RX580 nitro+
i tried 18.3.4 and 18.6.1 drivers and also Blockchain drivers and result is same 830-860 h/s on v7 algo 1300/2100 or 1350/2200 - same result..
before that i was mining loki on CN-heavy and hashrate was about 1050-1100 H/s
what i do wrong?
580 8G card have higher hash on heavy then on v7 but people have hashrate nearly to 1100 H/s on CN-v7, how they do this??? I have a similar question because my RX480 have 840 H/s at 1310/2000MHz. A higher memory frequency does not increase speed. Tried intensity 57-58 on v7? |
|
|
|
|
1270
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.6 - with algo switching support
|
on: August 19, 2018, 03:14:15 PM
|
Hi everyone, I had to reinstall Win 10, now SRB miner it's mining, but share are not found. Help please!  Use driver 18.6.1 or 18.3.4 and voila, shares will be found. Make sure to use ddu. hi doktor, amazing software, works really fine, thank you for you work. AMD drivers downgrade to 18.6.1 didn't fix my issue. SRB miner gives me the expected hashrate, but still no green lines https://imgur.com/a/p4vVCCjbtw, I'm having the same issue with XMR STAK, hashes are failing. I have no idea how to solve this did you first uninstall old driver with ddu ? (display driver uninstaller) this is very important |
|
|
|
|
1274
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.6 - with algo switching support
|
on: August 16, 2018, 07:53:49 PM
|
as all your intensities are same, drop the duplicateid stuff from cmd and put 2 threads in config. Algo switching doesnt like cmd parameters, i will try to fix that
I removed --enableduplicateguid from config but miner still close. here's the crashlog [2018-08-16 21:39:25] Miner version: 1.6.6
[2018-08-16 21:39:25] Windows version: 10.0 build 17134
[2018-08-16 21:39:25] Video driver version: 24.20.11021.1000
only 3 lines now here's the start.bat setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
@echo off
cd %~dp0
cls
SRBMiner-CN.exe --sendallstales --config config-normalv7.txt --pools pools-algos.txt --logfile crashlog.txt --usealgoswitching
pause
i remove duplicate line from the config too {
"cryptonight_type" : "normalv7",
"intensity" : 0,
"double_threads" : true,
"min_rig_speed" : 7500,
"min_rig_speed_duration" : 60,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 112, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 77, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 112, "worksize" : 16, "threads" : 2},
{ "id" : 3, "intensity" : 112, "worksize" : 16, "threads" : 2},
]
/* THERE ARE A LOT OF OPTIONS/PARAMETERS YOU CAN USE HERE */
/* YOU CAN FIND THEM IN THE README FILE */
}
If I remove the --usealgoswitching it will run This is very interesting, cause everything looks ok. Good config, good driver (18.6.1), really strange i don't know what to think. |
|
|
|
|
1276
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.6 - with algo switching support
|
on: August 16, 2018, 02:36:17 PM
|
Dok,
I have a problem when using algo switch
here's the crashlog.
[2018-08-16 21:04:46] Miner version: 1.6.6
[2018-08-16 21:04:46] Windows version: 10.0 build 17134
[2018-08-16 21:04:47] Video driver version: 24.20.11021.1000
[2018-08-16 21:04:52] AMD Platform ID: 0
[2018-08-16 21:04:52] AMD platform FOUND
[2018-08-16 21:04:52] Found 4 AMD devices
[2018-08-16 21:04:52] CPU AES-NI: TRUE
[2018-08-16 21:04:52] GPU0: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 34]
[2018-08-16 21:04:52] GPU1: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 34]
[2018-08-16 21:04:52] GPU2: Radeon RX Vega [gfx900] [8176 MB][Intensity 77.0][W: 16][T: 1][K: 1][BUS: 37]
[2018-08-16 21:04:52] GPU3: Radeon RX Vega [gfx900] [8176 MB][Intensity 77.0][W: 16][T: 1][K: 1][BUS: 37]
[2018-08-16 21:04:52] GPU4: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 41]
[2018-08-16 21:04:52] GPU5: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 41]
[2018-08-16 21:04:52] GPU6: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 45]
[2018-08-16 21:04:52] GPU7: Radeon RX Vega [gfx900] [8176 MB][Intensity 112.0][W: 16][T: 1][K: 1][BUS: 45]
[2018-08-16 21:04:52] ADL is enabled
[2018-08-16 21:04:52] CryptonightV7 mode enabled
[2018-08-16 21:04:52] DevFee pool SET
[2018-08-16 21:04:52] DevFee address SET
[2018-08-16 21:04:52] Starting init of mining threads
[2018-08-16 21:04:53] Loading kernel for DEVICE BUS ID 34 ...
[2018-08-16 21:04:54] Stopping miner process
[2018-08-16 21:04:54] Loading kernel for DEVICE BUS ID 34 ...
If I run each algo seperately they run fine after compiling kernel. but if I use algoswitch, the miner closes itself.
as all your intensities are same, drop the duplicateid stuff from cmd and put 2 threads in config. Algo switching doesnt like cmd parameters, i will try to fix that |
|
|
|
|
1279
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.6 - with algo switching support
|
on: August 14, 2018, 06:10:59 PM
|
Hi, Thanks for this awesome miner!
But two of rigs throws the following issue today and restarted :
"The Interactive Services Detection service terminated with the following error: Incorrect function."
- <EventData>
<Data Name="param1">Interactive Services Detection</Data>
<Data Name="param2">%%1</Data>
<Binary>5500490030004400650074006500630074000000</Binary>
</EventData>
</Event>
Is that any solution for this issue =)?
I'm not sure this is miner related at all as : Interactive Services Detection (the blinking button on the taskbar). Blinking button on the taskbar  |
|
|
|
|
1280
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.6.6 - with algo switching support
|
on: August 14, 2018, 12:03:19 PM
|
Hi Dok
Can i use gpu0123 with normalv7 and gpu456 with heavy? need run two copy of miner? or add in config two section for different algo? use 1.6.6 now
If you want to do algo switching then you must do it in config files, if you want to mine 'normally' you can do it either way. SRBMiner-CN.exe --ccryptonighttype normalv7 --cgpuid 0,1,2,3 --cgpuintensity 0,0,0,0 --cgputhreads 2,2,2,2 --cpool POOL --cwallet WALLET --cpassword x --sendallstales SRBMiner-CN.exe --ccryptonighttype heavy --cgpuid 4,5,6 --cgpuintensity 0,0,0 --cgputhreads 2,2,2 --cpool POOL --cwallet WALLET --cpassword x --sendallstales |
|
|
|
|
Show Posts
