|
1541
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 05, 2018, 06:50:00 AM
|
Hi Dok, I moved to 1.5.8 for the last 2 days, but I got problem. Please see screen shot below. It happened to all my 8 rigs randomly. So sorry that I moved back to 1.5.6. And so far, my rigs are stable. Not sure with other users, but may be you can take a look it, hopefully solve the issue as well.  Do you maybe have logging turned on so i can get a log file? Does this happen only when reloading pools, or switching pools ? edit: i maybe found something, we will see in next version  |
|
|
|
|
1543
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: Hashrate drop after DevFee
|
on: June 05, 2018, 05:02:58 AM
|
Hey doktor83 First I want to thank you endless lot, because of People like you the Internet ist today what it is. We have only one problem, i first noticed that hashrate drops from ~2050H/s to ~1600H/s with CryptoNightV7 after around 2 Hours. Then I could remember the DevFees are also done every 2 Hours, so i looked up and really, everytime 1-3 loglines after DevFee ist done the hashrate dropes. Like it would stuck in a less efficient setup? I use 4x Vega 64 with Registry changes optimised. Lovely greetings, S.O. Any hint what could cause the problem? It's 6-7 minutes after the devfee so nah, i don't believe that is related to devfee mining. Does the hashrate recover after a few minutes? Maybe someone with Vega's could help you, i know there is a known problem with Vega's and hashrate drop. |
|
|
|
|
1544
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 05, 2018, 05:00:35 AM
|
Hi Dok, I moved to 1.5.8 for the last 2 days, but I got problem. Please see screen shot below. It happened to all my 8 rigs randomly. So sorry that I moved back to 1.5.6. And so far, my rigs are stable. Not sure with other users, but may be you can take a look it, hopefully solve the issue as well. Thanks for reporting, i will look into it. |
|
|
|
|
1545
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 04, 2018, 09:00:52 PM
|
Next version fixes .srb file creation on every miner run  Thanks, waiting... Does any thoughts about why all my cards shows as 3rd card name except corenames? is this happening in cast and xmr stak also? everything working ok, except that gpu model is displayed incorrectly? Cast XMR use only core names. GGS detects cards with the same bug. XMR-stak didn't used. Everything works ok, exept gpu model is displayed incorrectly and srb files creates with that wrong name. it means we are all using the same opencl call to get gpu name, and that the driver returns it incorrectly. I am sure this will be fixed in newer driver versions. |
|
|
|
|
1548
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 04, 2018, 07:54:37 PM
|
before u have 1 file : 687f. without extension and this is it. now you co,mpile every time when start .before you compile only 1 time for 1 algo.
That's because on earlier versions there was a bug preventing creation of cached files for VEGA gpu's, so they were compiled every time, but 1 empty file was created Those numbers all have a meaning, like worksize, num of CU's etc etc, thats how the miner knows which kernel to use. Im just curious does it really every time , even if you did not change ANYTHING in config file like algo, or anything in gpu_conf, create a new file ? Every time. i not chg any. i go on loki back to hevy and go on new RYO. i try triton and go on saronite and back again to heavy, now i have 60 more file and 160mb lose space on disc. this is not good. version 1.5.1 work fine. -  and first compile is to long. and start again miner again i must wait so long for compile. 1.5.1 - first start wait long time. but second miner start in 2 sec. Miner ti jednostavno ne prepoznaje fileke koje sam proizvodi. i stalno iznova mora napravit compajliranje koje traje li traje. iritira. i mislim d ase vracam na staru verziju jer ja mjenjam koinove po dificultu a to je barem 20 puta dnevno i taj veci HR mi ne znaci tolko kolko mi znaci da miner krene odma a ne nakon minute. barem stavi da se fileki brisu kad izadjem iz minera da ne mora mjos i t orucno radit dok ne nadjes gdje je greska prepoznavanja...sto se veceg HR tice. Moram barem 3-4 put apokrenut minera da krene s tim vecim HR-om. znaci nista ne diram samo palim i gasim minera. i to stvara fileke... da li kartice podesavas kroz gpu_conf parametar? Ako da, da li bi mogao da probas da obrises sve .srb fajlove, i iskomentarises gpu_conf, stavi samo gore intensity 0, pa nek kreira tako fajl, i probaj pokreni majner ovako par puta, da li ce i ovako svaki put da kreira novi .srb ? znaci bez gpu_conf, tj. rucnog podesavanja. edit: i probably found the cause of cached files recreation, if someone could just test this for me: comment gpu_conf and just leave intensity 0 on top of config, so miner sets everything. Before this delete all .srb files. Miner should now create a new .srb file. Stop miner and start it again. If im not mistaken , it wont create a new .srb file, but instead use the cached version. |
|
|
|
|
1549
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 04, 2018, 06:19:40 PM
|
Hi Dok, actually I need that too  . Got same issue when connecting to either fairpool or nicehash, sometimes got very high diff until 8 million, and the miner just seemed idle. And this is very easy to reproduce the issue since it is only happened to my high hashrate rigs (6 vega56). But when tried using castxmr, the problem was gone. Maybe cast makes a reconnect behind the scenes Also there is a parameter that could be useful for you until i implement this max diff thing. Its 'job_timeout' parameter, you use it in pools config and set it in seconds. When no job is received for 'job_timeout' seconds, miner reconnects to the pool. |
|
|
|
|
1550
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 04, 2018, 06:14:34 PM
|
There are hundreds of SRBMiner users without any problems, where the miner works flawlessly. Or they just didn't write about them... Many added deleting of .srb files into start.bat... Please, don't get mad on me... I just think that all next AMD drivers will be with the same features as 18.4.1, 18.5.1 and 18.5.2. What about duplicate shares? ok, you know everything, no need for me to write anymore You are always just demanding, and so negative. Don't be like that. |
|
|
|
|
1551
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 04, 2018, 05:28:02 PM
|
But I think that doctor must update miner to support latest AMD drivers without issues.
Serious miners don't always update their drivers when a new one comes out, they use ones that are proven to be good and stable. A driver that isn't capable of recognising its own GPU is a trash, and shouldn't be used at all. Altough no one else except you reported this issue, so i guess it's something on your side. I really can't check out every new driver and re-work miner every time when a new driver comes out. You should stick to a driver that is working stable and good for you. I know it all. But I was forced to change drivers because of Windows 1803 update. Only on 18.4.1 driver was added WDDM 2.4 support, but it was too buggy. I used sometime 18.3.4 on 1803, but sometimes I encountered bugs on Windows start and work. When 18.5.1 driver was released I installed him and it work in all miners. But on some of them it's wrong GPU detection. All other mining functions work. And you as serious developer of miner with devfee! must update your miner to modern conditions in wich miners are placed. Creating .srb files on each start - it's the problem, isn't it? Unstable speed of mining is second problem as I know. Many of users of your miner finds different methods to force miner to mine with max speed. Anyone used GPU-Z launching during mining, others just relaunch miner many times, untill miner gives max speed. Im doing the best i can. There will always be users who have some kind of problems with the software, there will always be bugs..etc Just go into the allmighty claymore threads, every third post is some problem reporting. There are hundreds of SRBMiner users without any problems, where the miner works flawlessly. |
|
|
|
|
1552
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 04, 2018, 04:51:57 PM
|
I notice on 1.5.8 often appears duplicate shares on nicehash heavy algo. If it's some way to reduce amount of duplicate shares or fix that?
Are you sure those are duplicate shares? There is a mechanism that does not allow sending of the same result twice. Also for nicehash there is a protection for stale shares, cause nicehash does not like them. |
|
|
|
|
1553
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 04, 2018, 04:45:36 PM
|
Hi Dok,
Is it possible to add feature when miner get diff from pool more than 1,000,000 or any other diff that we specify it will reconnect to pool again?
Because nicehash will always increase diff until miner take time to solve that. After that because miner take time to submit share nicehash server will disconnected. So instead after sometimes miner reconnect I think better after miner get diff above diff we specify in miner it will auto reconnect.
Thanks.
can you please added this feature in the next release? really need it for nicehash and fairpool also because sometimes pool send job that have diff more than miner can handle. you are probably the only person on this earth who needs this, but ok i will add it |
|
|
|
|
1554
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 04, 2018, 04:44:36 PM
|
before u have 1 file : 687f. without extension and this is it. now you co,mpile every time when start .before you compile only 1 time for 1 algo.
That's because on earlier versions there was a bug preventing creation of cached files for VEGA gpu's, so they were compiled every time, but 1 empty file was created Those numbers all have a meaning, like worksize, num of CU's etc etc, thats how the miner knows which kernel to use. Im just curious does it really every time , even if you did not change ANYTHING in config file like algo, or anything in gpu_conf, create a new file ? |
|
|
|
|
1555
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 04, 2018, 04:39:34 PM
|
My vega win 10 1803 rigs donīt do this. However, I downloaded 1.5.8. 14 hours ago, run the miner and it was running ever since.
I took a look inside 1.5.7 folder but only on one of the rigs I found 2 files. So I guess it is not miner related, more some issue with driver or setup..
On my win10 rigs , NOT updated to 1803, and the good old blockchain driver, i can't reproduce the new cache file on every run bug.. But i will ofc look into it. |
|
|
|
|
1556
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.8
|
on: June 04, 2018, 04:37:13 PM
|
But I think that doctor must update miner to support latest AMD drivers without issues.
Serious miners don't always update their drivers when a new one comes out, they use ones that are proven to be good and stable. A driver that isn't capable of recognising its own GPU is a trash, and shouldn't be used at all. Altough no one else except you reported this issue, so i guess it's something on your side. I really can't check out every new driver and re-work miner every time when a new driver comes out. You should stick to a driver that is working stable and good for you. |
|
|
|
|
Show Posts
