the whole network dieded  |
|
|
|
Here is a pool i started as test but we already found a block, so everyone is welcome : http://46.17.100.27stratum+tcp://46.17.100.27:4533For password use : c=EXVOPool fee is only 0.2% at the moment cause still in test phase, payouts min 0.2 EXVO, also run every 1 hour |
|
|
|
Does it support R9 280X or R9 390?
It does, you should try it and share results, as i don't have those cards so i can't test. |
|
|
|
To doktor83:
How to set backup pools?
Is it possible to remotely monitor by https?
failover pools will be implemented, but i don't believe i will work on monitoring. i have in plan to implement an API , but that's all. |
|
|
|
|
V1.1.4
- Intensity can now be even more fine tuned, as values go from 0-200
- A nice little speedup of about 3-4% on RX580 (probably other RX4xx and RX5xx cards too, did not test it)
- Rewritten GPU detection code
@UnclWish, try 270x only now and report please, maybe it will work now.
|
|
|
|
i learned a lot of stuff from you guys, so thank you  Ofc nothing without endless hours of reading and googling, because that's the way it goes, and not begging. And you still support the guy who sells publically available timings? I don't know if he is selling his own timings, or publically available ones, i just help him, and he helps me, that's our relationship lol |
|
|
|
|
Latest ver. : V3.4
- Pimp my straps - give wings to your factory bios
- Added power control limit
- Added fan mode selection
- Med-High temp and PWM is now editable
- Added fan sensitivity and acoustic limit
- Bug fixes
Don't expect 99MHS from the strap pimper, it's just some basic tuning.
|
|
|
|
i learned a lot of stuff from you guys, so thank you Ofc nothing without endless hours of reading and googling, because that's the way it goes, and not begging. |
|
|
|
Can't get this to work.
Miner just closes after a few minutes, tried different settings.
No error, the CMD just vanishes.
maybe some info, like which cards, OS, driver, configuration example? |
|
|
|
|
What is this big delay in communication with XVG wallet ?
Every command takes from 5-40 sec to respond ?!
Anyone else has this issue?
I tried compiling the latest wallet again, deleting wallet.dat creating a totally new wallet, adding more threads in the conf.
Nothing helps.
I saw antminepool had the same issue, i wonder how he fixed it.
|
|
|
|
all we get is peanuts. sometimes even no peanuts  |
|
|
|
|
V1.1.3
- Fixed a bug from previous version where non decimal intensity in 'gpu_conf' did not work
- Fixed a bug in Pow V7 algo
If anyone wants to test Pow V7 before start, you can do it on moneroworld by using this conf :
{
"cryptonight_lite" : false,
"intensity" : 0,
"double_threads" : false,
"target_temperature" : 0,
"pool_use_tls" : false,
"pool" : "killallasics.moneroworld.com:7777",
"wallet" : "9v4vTVwqZzfjCFyPi7b9Uv1hHntJxycC4XvRyEscqwtq8aycw5xGpTxFyasurgf2KRBfbdAJY4AVcem L1JCegXU4EZfMtaz",
"password" : "x",
"location" : "europe",
"log_file" : "",
}
If it finds valid shares that means the new algo will work!
|
|
|
|
well then ill have to look into it |
|
|
|
V1.1.2
- Using different kernel for GCN and pre-GCN cards
- Intensity can now be more fine-tuned, it can be a decimal number (ex.: 17.2)
- Speedup about 2% in single thread mode
- Config file now begins with { and ends with }, so no more empty line bug
Good! Let's try it. I guess you still wont have luck with that single 270xcard thing, as i think its more driver related problem, cause of the mixed cards. |
|
|
|
|
V1.1.2
- Using different kernel for GCN and pre-GCN cards
- Intensity can now be more fine-tuned, it can be a decimal number (ex.: 17.2)
- Speedup about 2% in single thread mode
- Config file now begins with { and ends with }, so no more empty line bug
|
|
|
|
"charity_password" : "",
"gpu_conf" :
[
{ "id" : 0, "intensity" : 0, "double_threads" : true},
]
You were missing the , after charity, and your gpu id is 0 , not 1. |
|
|
|
Situation with 270X stays the same.
If I try to launch 270X alone, miner gives error CL_INVALID_DEVICE.
If I launch it with 2 RX580 launcher works.
Temperature and fan control for 270X didn't work.
Working program says the version 1.0 still...
Fixed the version thing Also could you re-download V1.1.1 from mega and try 270x alone, it should give a longer description on error like : X threads found, here's a list of deviceIdx : ... Could you paste that here please |
|
|
|
I guess it only works with GCN or newer cards like almost every other miner created
[2018-03-25 05:08:15] Error CL_INVALID_WORK_GROUP_SIZE when calling clEnqueueNDRangeKernel for kernel 4.
scrolling...
Try V1.1.1, i applied a fix that addresses this issue. |
|
|
|
Same error but it says Thread 0 now which indicates it is actually the HD 6950. Oh well I guess that card is going to have to be on neoscrypt now. xmr-stak suffers the same problems and all he offered was some patches you could add an compile yourself but no binaries. https://github.com/fireice-uk/xmr-stak-amd/issues/22i will look into it, to integrate that 'patch' |
|
|
|
|
Show Posts
