Name me one miner that mines devfee this way. Just one

haha so it looks like to me you are one of those i made this change against, you never really let the miner get to the 2 hour devfee mining. Now that means i never got the fee i do all the work for with this miner.
No miner works the way you would like.
So you go back to 1.6.2 and use it again the way so i dont get the fee.
Thank you, its nice of you.

https://mega.nz/#F!qVIgxAwB!kKmgCDICmQwbdVvMb-tAag

then go to the directory "Old"

same applies to claymore which mines in the first 15 minutes, and all the other mining software that works this way.
So if you used to change 5 coins in 1 hour that means you never even got to the devfee mining for me, so you did not give the 0.85% too. Right?

in the first 15 minutes. 4 min is in the first 15 min
People used scripts to kill process at 1.59h and start it again, so no devfee. I had to make this move, like other closed source miners.
All the next devfee's are shorter now to compensate that 1 extra devfee, and they run every 2 hours like before.

- Reorganised devfee mining, first mining is in the first 15 minutes, so to maintain the 0.85% fee, decreased devfee time from 1 minute to 55 seconds every 2 hours

If you just want to test you can use the benchmarking in 1.6.5

MoX mining has just started!

Jump on the train and get as much coins as you can, difficulty is still low.

Example:

pools.txt

{
"pools" :
[
  {
   "pool" : "mox.optimusblue.com:5555",
   "wallet" : "your-wallet",
   "password" : "x",
   "pool_use_tls" : false,
   "nicehash" : false
  }
]
}

config.txt:

{
"cryptonight_type" : "mox",
"intensity" : 0,
"double_threads" : true
}

use kernel=2, it should work

i saw it but you say its one gpu on one rig (so on other rigs is ok). Maybe try to lower the intensity for that one card?

54/8/2 should be ok

Hi, thanks for the kind words

Don't put quotes around boolean values (true, false), so it will be :

{
  "pools" :
  [
     {"pool" : "pool_1_address", "wallet" : "pool_1_wallet", "password" : "x", "nicehash" : true}
  ]
}

V1.6.5
- Added support for Cryptonight Red (MoX Project)
- Added possibility to offline benchmark algo configuration (--runbenchmark)
- Easily switch all AMD cards to compute mode, and turn off crossfire with one command (--setcomputemode)
- If using Blockchain drivers, hashing speed should be like it was before in ver 1.6.2
- If using Adrenaline 18.7.1 now shares are found, but speed is slower than on the recommended drivers
- If giveup_limit set to 0, miner will quit if it can't connect to pool
- Added driver version data to API
- Miner is now just one executable file, no more dll's needed, so it's more portable

+ MoX coin will soon launch it's main net, get prepared (use algo 'mox')

+ Added parameters --runbenchmark and --benchmarkduration, which gives you the possibility to benchmark your settings offline, so you don't need to connect to a pool.
Just set up everything as usual and add --runbenchmark parameter in your start.bat. The test is by default 1 minute, but you can set a custom duration, max 3 minutes. (in seconds of course)

+ No more need for compute switching software, you can do it now easily from SRBMiner. Fire up a command prompt in admin mode and run :

SRBMiner-CN.exe --setcomputemode

It will find all your AMD cards and set them to compute mode, and also disable crossfire on them. Nice and elegant.

+ Version 1.6.3 and 1.6.4 introduced some optimisations for Vega cards, which work only 18.3.4 and 18.6.1 drivers, but make some trouble with the old BC drivers. Miner now tries to apply old kernel (from v1.6.2) when using BC drivers, so there should be no more problem with these drivers, but no speed up like on 18.3.4 or 18.6.1 drivers.

+ Guys using 18.7.1 drivers complained no shares were found with these drivers, now this is fixed, but hashing is a lot slower, sorry. Don't use 18.7.1 drivers, or if you need to , just settle with the less speed you get.

+ Merged all dll's within one executable file, so the miner is now more portable as it contains all the files it needs to run. Just one .exe

Read the first page, it says dont use 18.7.1 

driver version ?
also do you have accepted shares in miner?

can you provide a log file ?

its cool but this is not the jce thread

i meant use latest version of miner. try with 18.3.4 drivers

yes, dont use it its buggy. but you wrote 18.6.1 not 18.7.1

use latest version

thanks for this info, i will put it on first page in tips. 90gb insane for 12x4gb