|
1701
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
|
on: May 08, 2018, 08:46:57 PM
|
I don't know how you guys do it.
My Vega 56's (Reference models) with Vega 56 BIOS runs 2010H/s on Normal V7 but on Heavy I am not able to get more than 1350H/s.
I have even now tried Vega 56 @ 1437/1100 907mV -30 power target on 56 intensity but no luck still only get 1350H/s per card.
My normal clocks on NormalV7 are: 1475/1100 @ 915 and 900
The miner isn't stable for vega 56/blockchain drivers, I noticed that on some testing I could get 1430+ average and then afterwards dropped to 1300+ that's after tweaking config files for intensity and worksize as well as some restarts/driver resets/hbcc memory toggles. Castxmr on the other hand will work just alright after a restart and driver reset. Now I'm mining 1430+ average(p6 1212/875,p7 1407/875, p3 95/875). or just drop the blockchain drivers and use 18.3.4 where you don't need to disable/enable devices for better hashrate. |
|
|
|
|
1703
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
|
on: May 07, 2018, 07:41:20 AM
|
Hi doktor, Could you please check the screen shot please? Currently I am mining sumo on sumo.fairpool.xyz using version 1.5.0. On my high hashrate rig, it is quite often to get million difficulty as shown in the screen shot below. I tried with other miner as well like cast xmr 1.0.0, no issue with difficulty. Unfortunately, I didn't happy with it's hashrate. And when the miner gets million difficulty, the miner will just display the hashrate, and few minutes later, it will run hashing again with difficulty 2000.  i hear you but the pool sets the diff, according to the speed you send shares. The more shares you send in shorter time so will the pool raise the difficulty. If the pool is set up good it should set a diff high so you should get approx 10 shares / min. Others also complained on fairpool, but they said they have problems with every miner there, not only SRB. |
|
|
|
|
1704
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
|
on: May 07, 2018, 05:15:56 AM
|
So i tried to set an auto start after restart but when the miner opens it shows random purple letters and shuts off.
also still would like to know why 1 rig when i try to run it, it compiles submits a share or two and then a message comes up in the miner stating " Something went wrong, i think you are up to something naughty and I have to stop you" and the miner shuts off
what is different on that rig than on the others where it is working? That is an anti debug trigger you are seeing there. |
|
|
|
|
1705
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
|
on: May 06, 2018, 08:44:54 PM
|
Awesome, thank you  Doctor my main gpu is doing around 870 but if i go see a tv show or something else he will go for 980, now what i do is when i let it mine i simply let vlcplayer open with something at pause and the gpu will always be doing 980h/s. Why i get more 100h/s if i am running a vlc player? I tried increasing dificulty but same results. im not smart enough for this question. |
|
|
|
|
1707
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
|
on: May 06, 2018, 02:19:18 PM
|
still have the "miner do nothing after switch back from dev fee" problem,i got the log this time,it happens some times a day。as you can see, it take about 6 minuts for one round......the miner is SRBminer1.4.9。the last message is network error,but i think it's not my network problem,this only happened when the miner switch from dev fee to my pool!
[2018-05-06 21:43:52] miner_result: Pool accepted result 0x00003AF1
[2018-05-06 21:44:04] switch_pool: Connected to devfee pool
[2018-05-06 21:44:04] DevFee stops in 65 seconds
[2018-05-06 21:44:04] sock_ready: Devfee user logged in
[2018-05-06 21:44:05] DevFee stops in 64 seconds
[2018-05-06 21:44:06] DevFee stops in 63 seconds
[2018-05-06 21:44:07] DevFee stops in 62 seconds
[2018-05-06 21:44:08] DevFee stops in 61 seconds
[2018-05-06 21:44:09] DevFee stops in 60 seconds
[2018-05-06 21:44:10] DevFee stops in 59 seconds
[2018-05-06 21:44:11] DevFee stops in 58 seconds
[2018-05-06 21:44:12] DevFee stops in 57 seconds
[2018-05-06 21:44:13] DevFee stops in 56 seconds
[2018-05-06 21:44:14] DevFee stops in 55 seconds
[2018-05-06 21:44:15] DevFee stops in 54 seconds
[2018-05-06 21:44:16] DevFee stops in 53 seconds
[2018-05-06 21:44:17] DevFee stops in 52 seconds
[2018-05-06 21:44:18] DevFee stops in 51 seconds
[2018-05-06 21:44:19] DevFee stops in 50 seconds
[2018-05-06 21:44:20] DevFee stops in 49 seconds
[2018-05-06 21:44:21] DevFee stops in 48 seconds
[2018-05-06 21:44:22] DevFee stops in 47 seconds
[2018-05-06 21:44:23] DevFee stops in 46 seconds
[2018-05-06 21:44:24] DevFee stops in 45 seconds
[2018-05-06 21:44:25] DevFee stops in 44 seconds
[2018-05-06 21:44:26] DevFee stops in 43 seconds
[2018-05-06 21:44:27] DevFee stops in 42 seconds
[2018-05-06 21:44:28] DevFee stops in 41 seconds
[2018-05-06 21:44:29] DevFee stops in 40 seconds
[2018-05-06 21:44:30] DevFee stops in 39 seconds
[2018-05-06 21:44:31] DevFee stops in 38 seconds
[2018-05-06 21:44:32] DevFee stops in 37 seconds
[2018-05-06 21:44:33] DevFee stops in 36 seconds
[2018-05-06 21:44:34] DevFee stops in 35 seconds
[2018-05-06 21:44:35] DevFee stops in 34 seconds
[2018-05-06 21:44:36] DevFee stops in 33 seconds
[2018-05-06 21:44:37] DevFee stops in 32 seconds
[2018-05-06 21:44:38] DevFee stops in 31 seconds
[2018-05-06 21:44:39] DevFee stops in 30 seconds
[2018-05-06 21:44:40] DevFee stops in 29 seconds
[2018-05-06 21:44:41] DevFee stops in 28 seconds
[2018-05-06 21:44:42] DevFee stops in 27 seconds
[2018-05-06 21:44:43] DevFee stops in 26 seconds
[2018-05-06 21:44:44] DevFee stops in 25 seconds
[2018-05-06 21:44:45] DevFee stops in 24 seconds
[2018-05-06 21:44:46] DevFee stops in 23 seconds
[2018-05-06 21:44:47] DevFee stops in 22 seconds
[2018-05-06 21:44:48] DevFee stops in 21 seconds
[2018-05-06 21:44:49] DevFee stops in 20 seconds
[2018-05-06 21:44:50] DevFee stops in 19 seconds
[2018-05-06 21:44:51] DevFee stops in 18 seconds
[2018-05-06 21:44:52] DevFee stops in 17 seconds
[2018-05-06 21:44:53] DevFee stops in 16 seconds
[2018-05-06 21:44:54] DevFee stops in 15 seconds
[2018-05-06 21:44:55] DevFee stops in 14 seconds
[2018-05-06 21:44:56] DevFee stops in 13 seconds
[2018-05-06 21:44:57] DevFee stops in 12 seconds
[2018-05-06 21:44:58] DevFee stops in 11 seconds
[2018-05-06 21:44:59] DevFee stops in 10 seconds
[2018-05-06 21:45:00] DevFee stops in 9 seconds
[2018-05-06 21:45:01] DevFee stops in 8 seconds
[2018-05-06 21:45:02] DevFee stops in 7 seconds
[2018-05-06 21:45:03] DevFee stops in 6 seconds
[2018-05-06 21:45:04] DevFee stops in 5 seconds
[2018-05-06 21:45:05] DevFee stops in 4 seconds
[2018-05-06 21:45:06] DevFee stops in 3 seconds
[2018-05-06 21:45:07] DevFee stops in 2 seconds
[2018-05-06 21:45:08] DevFee stops in 1 seconds
[2018-05-06 21:45:09] DevFee stops in 0 seconds
[2018-05-06 21:45:10] switch_pool: Disconnected from devfee pool, now mining for user
[2018-05-06 21:45:15] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:45:24] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:45:27] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:45:48] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:45:56] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:46:01] stats: Mining time: 0 days, 13 hours, 47 minutes, 40 seconds
[2018-05-06 21:46:01] stats: Pool: us-central01.miningrigrentals.com:3333
[2018-05-06 21:46:01] stats: Connected since: 2018-05-06 10:03:32
[2018-05-06 21:46:01] stats: Accepted/Total shares: 3935/3936
[2018-05-06 21:46:01] stats: Average time to find share: 12 seconds
[2018-05-06 21:46:01] stats: HW errors: GPU1: 5
[2018-05-06 21:46:11] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:46:16] stats: Mining time: 0 days, 13 hours, 47 minutes, 55 seconds
[2018-05-06 21:46:16] stats: Pool: us-central01.miningrigrentals.com:3333
[2018-05-06 21:46:16] stats: Connected since: 2018-05-06 10:03:32
[2018-05-06 21:46:16] stats: Accepted/Total shares: 3935/3936
[2018-05-06 21:46:16] stats: Average time to find share: 12 seconds
[2018-05-06 21:46:16] stats: HW errors: GPU1: 5
[2018-05-06 21:46:26] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:46:31] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:46:42] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:47:00] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:47:13] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:47:30] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:47:31] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:47:34] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:47:47] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:47:51] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:48:08] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:48:27] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:48:40] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:48:43] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:48:51] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:49:33] miner_result: Duplicate share protection kicked in!
[2018-05-06 21:49:48] miner_result: Sending user result to pool
[2018-05-06 21:49:48] json_send: {"method":"submit","params":{"id":"dbdec475-8c1d-491e-a2af-d648bbd3628c","job_id":"uOK3V+rwF5Nr7ECs3PUXDZ9thDP0","nonce":"8aa801b0","result":"081bf9c4ca14344ff25bfb55b1b89f800f9b7baeaf9b216156432929de8c0000"},"id":1}
[2018-05-06 21:50:08] json_send: Pool not responding
[2018-05-06 21:50:08] miner_result: Network error
[2018-05-06 21:50:08] miner_result: Network error
[2018-05-06 21:50:08] miner_result: Network error
[2018-05-06 21:50:08] socket_error: Pool not responding
[2018-05-06 21:50:08] Connection to pool lost. Reconnecting in 5 seconds.
No you dont you can clearly see it disconnected nicely. The connection with your pool dropped, as you can see, network error and pool not responding. i guess it reconnected after the last line and everything was ok. |
|
|
|
|
1710
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
|
on: May 05, 2018, 07:16:50 PM
|
Could you please add more details how to use the optional parameters like devcon because every time when i try to add them to the config file it is giving error
Thanks
{ "cryptonight_type" : "normalv7", "intensity" : 0, "double_threads" : true, "restart_devices_on_startup" : true, "restart_devices_on_startup_script" : "runmeafterdevconresettedgpus.bat" } you put runmeafterdevconresettedgpus.bat in the miner folder. |
|
|
|
|
1711
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
|
on: May 05, 2018, 07:14:48 PM
|
oh tahiti now i see. probably does not support overdriveN, just older versions
well it shows overdrive tab in AMD drivers gui & i am controlling it with overdrive5 tool... https://github.com/BackupGGCode/overdrive5- take a look (opensource) its old but gold - working r9 to vega flawlessly. right, overdrive 5. atm overdriveN only supported by miner. when i finish the important stuff i will look into it. thanks man, and please take a look at fan speed control also. currently it`s not setting speed at all. w 18.4.1 18.3.4 drivers tested at least on baffins (sapphire rx 550 2gb) if you`ll need any help w testing let me know ) I am ready to test or provide you any logs. hope you ll finish other stuff soon. Thanks. Are you sure that this app works on Vegas ? I mean did you try it yourself? |
|
|
|
|
1716
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
|
on: May 05, 2018, 01:41:03 PM
|
I have a funny problem! When I use the 1.3.2 version I can connect to every pool and mine without any problems. Yesterday I download the latest version 1.5.1 and changed all of the data in the config.txt file, but as I start the miner it connects to nano pool to mine monero and it does not get any work? Why is it happening and what may be causing the issue? I am mining with 1.3.2 simply because with the pre-previous version I had the same issues - I think 1.4.0 or 1.4.1 and I rolled back to 1.3.2. I really want to use the latest version because it gives more detailed information regarding the cards, optimizations etc etc, simply don't want to be stuck in the past  First page : ATTENTION:
From V1.4.0 the miner uses a separate pools.txt file, where you define your pools, wallet, etc.
Config from older versions that includes pool related data, won't be used! |
|
|
|
|
1717
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
|
on: May 05, 2018, 09:54:09 AM
|
Hi, thanks for API, its big PLUS.
Anyway, I am not able to set port. Everytime I try it gives me parse error in config. Anyone with functionad changed port? Thanks
{ "cryptonight_type" : "heavy", "intensity" : 0, "double_threads" : true, "api_enabled" : true, "api_rig_name" : "test", "api_port" : 19999 } You can get the json from 127.0.0.1:19999 (open in browser to see it) |
|
|
|
|
1718
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
|
on: May 05, 2018, 09:52:26 AM
|
Experiencing strange issue with SRBminer. Everything working like charm for one or two days, and than all of a sudden, i get hashing speed zero - 0. There is no error or similar, just hashing speed is 0 but miner keeps working so on.
What im doing wrong? Is it bug in software? Can i make SRBminer to restart the PC after zero hashing speed occurs? Thx.
In win10 if you click in the console window, it pauses the app (claymore and other miners also). so until you press a key on keyboard its "stuck". Also could be you were browsing, watching a movie etc etc. If none of the above, and it just a specific card, not all of them, just lower intensity by 1-2 for that card. Miner automatically restarts if a gpu's hashing speed is 0 for about 1.5 minutes. And yes, you can also restart pc if for some reason the auto restarter watchdog isnt working for you. You have info on the first page for this. |
|
|
|
|
Show Posts
