1801
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.8
|
on: April 25, 2018, 12:42:00 PM
|
Is latest Claymore ETH getting BUS id-s for you on the driver you use ?
Like :
GPU #0: Ellesmere (AMD Radeon (TM) RX 480 Graphics), 8178 MB available, 36 compute units (pci bus 2:0:0)
OpenCL initializing...
AMD Cards available: 12 GPU #0: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 1:0:0) GPU #0 recognized as Radeon RX 460/560 GPU #1: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 2:0:0) GPU #1 recognized as Radeon RX 460/560 GPU #2: Baffin (Radeon RX 550 Series), 2048 MB available, 10 compute units (pci bus 3:0:0) GPU #2 recognized as Radeon RX 460/560 GPU #3: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 4:0:0) GPU #3 recognized as Radeon RX 460/560 GPU #4: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 5:0:0) GPU #4 recognized as Radeon RX 460/560 GPU #5: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 6:0:0) GPU #5 recognized as Radeon RX 460/560 GPU #6: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 8:0:0) GPU #6 recognized as Radeon RX 460/560 GPU #7: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 11:0:0) GPU #7 recognized as Radeon RX 460/560 GPU #8: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 12:0:0) GPU #8 recognized as Radeon RX 460/560 GPU #9: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 13:0:0) GPU #9 recognized as Radeon RX 460/560 GPU #10: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 14:0:0) GPU #10 recognized as Radeon RX 460/560 GPU #11: Baffin (Radeon RX 550 Series), 2048 MB available, 12 compute units (pci bus 15:0:0) GPU #11 recognized as Radeon RX 460/560 POOL/SOLO version GPU #0: algorithm ASM 1 GPU #1: algorithm ASM 1 GPU #2: algorithm ASM 1 GPU #3: algorithm ASM 1 GPU #4: algorithm ASM 1 GPU #5: algorithm ASM 1 GPU #6: algorithm ASM 1 GPU #7: algorithm ASM 1 GPU #8: algorithm ASM 1 GPU #9: algorithm ASM 1 GPU #10: algorithm ASM 1 GPU #11: algorithm ASM 1 No NVIDIA CUDA GPUs detected. Hm, i will try to find a workaround with BUSid detection. Which drivers are you using?
|
|
|
1803
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.8
|
on: April 25, 2018, 11:56:01 AM
|
[2018-04-25 14:49:17] AMD Platform ID: 0 [2018-04-25 14:49:17] AMD platform FOUND [2018-04-25 14:49:17] Found 12 AMD devices [2018-04-25 14:49:17] GPU0: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0] [2018-04-25 14:49:17] GPU1: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0] [2018-04-25 14:49:17] GPU2: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0] [2018-04-25 14:49:17] GPU3: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0] [2018-04-25 14:49:17] GPU4: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0] [2018-04-25 14:49:17] GPU5: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0] [2018-04-25 14:49:17] GPU6: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0] [2018-04-25 14:49:17] GPU7: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0] [2018-04-25 14:49:17] GPU8: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0] [2018-04-25 14:49:17] GPU9: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0] [2018-04-25 14:49:17] GPU10: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0] [2018-04-25 14:49:17] GPU11: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 24.0][W: 8][T: 2][K: 1][BUS: 0]
Well BUS id's are not detected , that's the problem. What is the output of SRBMiner-CN.exe --listdevices ?
|
|
|
1804
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.8
|
on: April 25, 2018, 11:44:29 AM
|
V1.4.8- Added support for new ArtoCash algo - Added fast pool switching when pressing P - Added target_temperature setting to gpu_conf too, if this option is used on top of config (value is > 0), gpu_conf setting is IGNORED- Added target_fan_speed setting to gpu_conf, atm must set it in RPM, not in percent, sorry - Minor bug fixes target_temperature can now be set for every card separately. Comment target_temperature on top of config or set it to 0 if you want to use this setting in gpu_conf. target_fan_speed sets the minimum fan speed, and you enter a value in RPM (for now), not in PERCENT. Are you planning to fix ADL in near future? at least correct temps and fans. I like your miner, but stuck with 3-rd party utils. and as for each separate rig I need unique config - deployment becomes nightmare ) Thnx! ADL is working for OverdriveN supported cards. So what should be fixed ? well I tested it before on multiple rigs, today I just used one - 12*rx550 baffins saphire. tested with with adldisable - Fan speed not detected, temperatures too. can provide screenshots or logs, let me know what you need. (this cards stop fans by default until they are 65, so it`s pretty good chance to burn it right before fans kick in). send me a log without adldisable, ergo with ADL enabled
|
|
|
1808
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.8
|
on: April 25, 2018, 06:23:38 AM
|
V1.4.8- Added support for new ArtoCash algo - Added fast pool switching when pressing P - Added target_temperature setting to gpu_conf too, if this option is used on top of config (value is > 0), gpu_conf setting is IGNORED- Added target_fan_speed setting to gpu_conf, atm must set it in RPM, not in percent, sorry - Minor bug fixes target_temperature can now be set for every card separately. Comment target_temperature on top of config or set it to 0 if you want to use this setting in gpu_conf. target_fan_speed sets the minimum fan speed, and you enter a value in RPM (for now), not in PERCENT. Are you planning to fix ADL in near future? at least correct temps and fans. I like your miner, but stuck with 3-rd party utils. and as for each separate rig I need unique config - deployment becomes nightmare ) Thnx! ADL is working for OverdriveN supported cards. So what should be fixed ?
|
|
|
1809
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.8
|
on: April 25, 2018, 06:22:59 AM
|
@doc
Is it possible to implent -ttli -tstop - start etc just like claymore?
So it reduce the intensity when is above a target temperatur? I use a aio wc and it can't use the fan for target temps also when the fanspeed is already 100 u can't use the parameter u already implement.
Thanks
no, intensity change while mining is not available. And probably won't be.
|
|
|
1810
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.8
|
on: April 25, 2018, 05:25:09 AM
|
V1.4.8- Added support for new ArtoCash algo - Added fast pool switching when pressing P - Added target_temperature setting to gpu_conf too, if this option is used on top of config (value is > 0), gpu_conf setting is IGNORED- Added target_fan_speed setting to gpu_conf, atm must set it in RPM, not in percent, sorry - Minor bug fixes target_temperature can now be set for every card separately. Comment target_temperature on top of config or set it to 0 if you want to use this setting in gpu_conf. target_fan_speed sets the minimum fan speed, and you enter a value in RPM (for now), not in PERCENT.
|
|
|
1811
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.7
|
on: April 24, 2018, 11:31:39 AM
|
my ASUS STRIX rx570 4gb cards, wouldn't go more than I=29, hashing at 500~600 H/s, no matter what clock and memory settings I put in AB. what can be the problem?
at the same time, some of my RX470 8gb nitro+ are hashing at I=50 and 850-950H/s on one rig, and I=41 and 750-800H/s on the other..
Contact Mattthev, he'll sort you out with some great memory straps to flash your GPUs with in case you haven't got decent ones. I assume you've set your intensity, worksize and amount ot threads properly? no, how can I reach him? here? well, for my STRIXs if I go more than I=29 rig crashes, plus if I leave it at I=0 for auto, it also makes it I=29. as for worksize and threads, optimal I guess is w=8, and T=2 so I keep it like this maybe try with 1 thread. W8 is ok, play with intensity.
|
|
|
1812
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.7
|
on: April 23, 2018, 09:27:39 PM
|
I DO RECOMMEND this miner , cause I was using cast-xmr and it was showing better hashrate , but my average on the pool was low 17500-18000. Then i started using your miner and it is showing less hashrate may be 5% , BUT my average hashrate started growing and now after 24 hours it is 19955 and is stable . Keep the good work boys!!!!!!!!!!!!! And guys don`t get fooled by the better hash of other miners it is not real obviosly!!!
Thank you man, really appreciate the good words !! SRBMiner support json report stats. Please answer because i'm want Development UI Control for SRBMiner Thanks There's no API yet, but soon will be
|
|
|
1813
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.7
|
on: April 23, 2018, 08:23:06 PM
|
Doctor, Could you change the id of gpu to match with GPUZ. my rig has 12 gpu and i'm very confuse, cant find gpu which has low hashrate. thank you. Ok, suppose the order is same as in GPU-z. and card 4 has low hashrate. What now ? I don't really understand why is the order important. You can move mem clock + 1 in OverdriveNtool , press H in SRBminer and see which cards mem clock raised by 1 Now you found which card is it. I have 6 rig with 12gpu and i try to make a best hash rate. if i know which card has low hashrate, i can directly adjust them because OverdriveNtool has a same gpu id as GPUZ. I confuse because of more card, haha.
|
|
|
1815
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.7
|
on: April 23, 2018, 07:19:52 PM
|
Doctor, Could you change the id of gpu to match with GPUZ. my rig has 12 gpu and i'm very confuse, cant find gpu which has low hashrate. thank you. Ok, suppose the order is same as in GPU-z. and card 4 has low hashrate. What now ? I don't really understand why is the order important. You can move mem clock + 1 in OverdriveNtool , press H in SRBminer and see which cards mem clock raised by 1 Now you found which card is it.
|
|
|
1816
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.6
|
on: April 23, 2018, 05:28:10 PM
|
doctor, did you plan to add adl support for Pitcairn like GCN1.0 GPU's? Did you plan to add clock, voltage, fans and pw controls?
Often recieve rejected shares "Job not found" on nicehash cryptonightV7.
Not at the moment, OverdriveNEXT supported cards only. That's a whole bunch of cards starting from 290 to Vega. Oh, ok. What about adding clock, voltage, fans and pw controls? And another one: i think that's good to add parameter for minrigspeed. If speed 5 minutess less than that parameter - restart rig. In 1.4.7 how to set target and shutdown temperatures individual for each card? To be honest i implemented clocks and voltage settings but its not working as it should, i need more time to figure out what's wrong. By pw control you mean power limit setting ? not a bad idea for the restart if speed < 5 minutes. target and shutdown temperatures are global , not per card. Shutdown temperature shuts down rig, if the entered temperature is reached.
|
|
|
1817
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.7
|
on: April 23, 2018, 01:49:39 PM
|
I DO RECOMMEND this miner , cause I was using cast-xmr and it was showing better hashrate , but my average on the pool was low 17500-18000. Then i started using your miner and it is showing less hashrate may be 5% , BUT my average hashrate started growing and now after 24 hours it is 19955 and is stable . Keep the good work boys!!!!!!!!!!!!! And guys don`t get fooled by the better hash of other miners it is not real obviosly!!!
Thank you man, really appreciate the good words !!
|
|
|
1820
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: SRBMiner Cryptonight AMD GPU Miner V1.4.6
|
on: April 23, 2018, 11:17:39 AM
|
doktor83,
I've been using your miner for a while now and i really enjoy using it. But recently my hashrate is going down from 5200 to 4900 after like every 2 days or something. So when that happens, i have to restart my rig and after that it becomes normal. What do you think about this one? The version was 1.3.0.
Which algo and gpu's ? Vega's ?
|
|
|
|