more nodes added!

so guys everything was fine or i should change something in the guide?

this should help. it may have mistakes as i didnt have time to check thoroughly

https://bitcointalk.org/index.php?topic=506940.0

is it me or mining is extremely slow? i see only 287 blocks out after so many hours. thats good since i havent got any blocks yet if you dont consider all the IPO premine...

minerd wouldnt crash i think but it would mine together which will slow down minerd

are you sure you put the right username password? from my .conf file it is heavycoin:PASSWORD

btw you have to start deamon with heavycoin --daemon if it isnt running. and if it runs and you change the .conf file you have to restart it. stoppping it didnt work for me so i just rebooted the VM and started it again...

i just updated the OP.

now the guide actully downloads and compiles heavycoin and also creates the .conf file. then you download and compile cpuminer-heavy and you run it.

it should work fine. i hope i didnt do any mistakes. because i am in a hurry. i will check this thread later.

for mining with minerd you have to run this:

./minerd -a heavy -v 32 -o 127.0.0.1:7202 -O heavycoin:PASSWORD

remover gen=1 from .conf though cause you will be mining both with inwallet miner and minerd. i had some problems with restarting deamon after changing .conf file so every time i rebooted my VM with sudo reboot

also of course you need to download and compile cpuminer-heavycoin. See here:

https://bitcointalk.org/index.php?topic=506818.0

check this thread:

https://bitcointalk.org/index.php?topic=506940.0

i forgot gen=1 at the .conf file

now its added in the guide. you should restart deamon if you have already ran it

Is there any pool already up?

solo mining guide here

https://bitcointalk.org/index.php?topic=506940.0

if you want to use the stand alone miner download it and compile it with this guide https://bitcointalk.org/index.php?topic=506818.0
and just aim it to the deamon

Poos arent up yet. Coin is out only about 2 hours. This is the time for SOLO mining! mine while you can!

Donations accepted :
Heavycoin: HGBuGfcfFmSLoYbHQk7LpLkubMoxvg2uCf
Datacoin: D9myVoDFPhjWLMrKx7Ag6gH7Y3A6V441cT


Difficulty will go up fast!

1) Please use my referral https://www.digitalocean.com/?refcode=9d68ca19e204 and create a droplet 2CPU 2GB Ram Ubuntu 13.10 64x .It must be 1GB or more. You can create up to 5 droplets.
2) Connect with putty using using ip and password or just write those in the console. 1 putty per droplet! You can always download putty from here http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html  Putty is better cause you can copy paste everything:

----------------------------------------------------------------------------------------------------------------------------

sudo apt-get update

sudo apt-get install yasm -y git make g++ build-essential libminiupnpc-dev

sudo apt-get install -y libboost-all-dev libdb++-dev libgmp-dev libssl-dev dos2unix

sudo apt-get install automake libcurl3-dev

git clone https://github.com/heavycoin/heavycoin

cd heavycoin/src

make -f makefile.unix     ---this will take a few minutes

sudo cp -f heavycoind /usr/local/bin/  

cd

mkdir -p .heavycoin

cd .heavycoin

nano

copy paste all this in the window tha opens:

rpcuser=heavycoin
maxconnections=300
rpcallowip=*
daemon=0
listen=1
server=1
addnode=172.245.221.171
addnode=94.102.53.183
addnode=76.10.203.44
addnode=61.156.57.71
addnode=172.246.113.106
addnode=117.27.110.138
addnode=54.186.44.85
addnode=125.79.96.236
addnode=198.52.200.43
addnode=node01.heavycoin.cc
rpcpassword=PASSWORD


then press ctrl X, then press Y and now that asks for name write heavycoin.conf .This way we just made the .conf file.

git clone https://github.com/heavycoin/cpuminer-heavycoin


cd cpuminer-heavycoin

nano Makefile.am

change
minerd_LDADD   = @LIBCURL@ @JANSSON_LIBS@ @PTHREAD_LIBS@ @WS2_LIBS@ -lssl
to
minerd_LDADD   = @LIBCURL@ @JANSSON_LIBS@ @PTHREAD_LIBS@ @WS2_LIBS@ -lcrypto

./autogen.sh

./configure CFLAGS="-O3"

make

heavycoind --daemon

cd

cd cpuminer-heavy

screen -R 1 ./minerd -a heavy -v 32 -o 127.0.0.1:7202 -O heavycoin:PASSWORD

press ctrl+A and then D

and finally write:

watch 'heavycoind listaccounts & heavycoind getmininginfo'

and you are already mining with minerd and you can see your balance that should be 0 until you get something...

thanks! i was about to write this!

this is my problem right now. it needs -lcrypto

i added this line. it should fix the problem



sudo apt-get install automake libcurl3-dev

reserved

Pool is http://hvc.1gh.com/

Donations accepted :
Heavycoin: HGBuGfcfFmSLoYbHQk7LpLkubMoxvg2uCf
Datacoin: D9myVoDFPhjWLMrKx7Ag6gH7Y3A6V441cT


Difficulty will go up fast!

1) Please use my referral https://www.digitalocean.com/?refcode=9d68ca19e204 and create a droplet 2CPU 2GB Ram Ubuntu 13.10 64x .It must be 1GB or more. You can create up to 5 droplets.
2) Connect with putty using using ip and password or just write those in the console. 1 putty per droplet! You can always download putty from here http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html  Putty is better cause you can copy paste everything:

----------------------------------------------------------------------------------------------------------------------------

sudo apt-get update

sudo apt-get install yasm -y git make g++ build-essential libminiupnpc-dev

sudo apt-get install -y libboost-all-dev libdb++-dev libgmp-dev libssl-dev dos2unix

sudo apt-get install automake libcurl3-dev

git clone https://github.com/1gh/cpuminer-heavycoin

cd cpuminer-heavycoin

nano Makefile.am

now since this is a new miner for this specific pool you may not need to do this change with -lcrypto but i dont have time to test it right now:

change
to

./autogen.sh

./configure CFLAGS="-O3"

make

and now you are ready to mine at  pool. just use this for example:

screen -S 1 ./minerd -a heavy -v 512 -o stratum+tcp://hvcpool.1gh.com:5333 -u WALLET -p x



post here questions.