It appears to be working (ie. manual power off, reset etc) but the colors don't change and stay in GREEN (ie. it should change from GREEN to RED during reset or power off). However, I can confirm that manual reset/power off/on does work, because the miner seen at the dashboard does reset and reboot.
Then try connecting those LED cabled differently, it must work becasue it is a ISO standard of all motherboards
White and Yellow cables are for LTD status, try connecting them in other configurations near this position. Those leds only READ voltage from pins so you wont damage anything.
Hi, I am interested in purchasing a SimpleRigResetter, I see on the site shop there are optional power supplies for EU.. I am in US so what do I need?
Also I see there are optional rig cables.. what are these for? Do I need one for each rig? (I'll have 5 rigs for now but may get more in the future)
Will appreciate help, thanks
Here is all described (go little lower on this page)
https://shop.simplemining.net/simplerigresetter.html?___SID=UYou need 8 cables to One SRR. Those cables you will connect to each rig, you can choose lenght.
You will be connecting them to Power LED and Power Button of the rig motherboard.
If you have 5 rigs and in future more, buy 8 cables, its not big expense and you will have for future.
If you will even more rigs there will be Extension Board which can be connected to SRR.
The Extension Board will give you even +24 Rigs but it will be more expensive than Base SRR.
Power Supply, you can select EU power supply + USA Adapter - its no 2 on list.
Also you can not buy this powersupply and instead you can go to your local store and buy there becasue its easy to find.
Specifications of this Power Supply you have also on this site.