Hi Patrike,
When this happens :
it leads to this issue :
Miner doesn't gets restarted as AwesomeMiner did not detect the crash.
Offline rules don't do anything, it just stays offline like this forever.
It's not a crash, but it should trigger the offline detection rule. It could probably be detected by the "Accept Progress" rule as well if enabled. Can you please share some details of how the Offline Detection rule is configured? That will help me understand why it didn't work as expected. Thanks!
|
|
|
Awesome Miner version 4.2 - Support variables in notifications messages and Webhooks, to provide dynamic information based on the miner that triggered the notification. See Notifications help page on the web site for details.
Be so kind, where can I find the details? Because on Notifications help page on the web site I found just one sentence and nothing new: Webhooks
Webhooks will make a HTTP request to the specified URL for every notification. The default setting is to use POST, which is required to include the notification content in the HTTP body. Thank you! Please see the Variables section on this page: http://www.awesomeminer.com/help/notifications.aspxThese variables works for any notifications and not only for Webhooks.
|
|
|
Are there any plans to incorporate DTSM's miner into awesome miner? I have been trying to add it myself via the managed template and generic miner option, but i am a bit confused on what to add for command line options. I have been unable to find any help on this or what awesome miner expects for this section. Any help would be appreciated. all ready asked an the Answer was hell look at it an maybe .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner.. I do get many requests for features and mining software, and I try to implement the most requested features. Are you using the exact same command line arguments for the Generic Miner in Awesome Miner, as you use when manually launching the DTSM miner? Any output in if you use the Diagnostics button in the toolbar? That's just it, i'm not even getting ZM to launch via Awesome Miner. Do i have to enter all the command line options, filled out with the information entirely (like server/pool, workername etc)? How would that work if I want Awesome Miner to pass the information based on which coin I want to mine via Profit Switching? The documentation around importing custom mining software is lacking IMO, any resources you can point me to that have more detailed information? When using a Generic Miner, you must specify the full command line yourself. Awesome Miner has no idea about how to set pools configuration or anything else. This is also stated in the documentation for the Generic Miner feature: http://www.awesomeminer.com/help/genericminer.aspxPlease don't get me wrong here, I'm not saying that a Generic Miner is the best concept ever - but it's a working way to launch any mining software as long as you provide the correct command line parameters to it.
|
|
|
Awesome Miner version 4.2
- Notifications via Telegram using Cloud Services - Support variables in notifications messages and Webhooks, to provide dynamic information based on the miner that triggered the notification. See Notifications help page on the web site for details. - New Rule action to apply a Managed Template to one or more miners - Filtering of miners in the Options dialog to faster find a specific miner by name. Filtering also supported when applying Managed Templates. - Show IP address of the selected miner in the Summary tab - Correction to Performance History when generating reports including both daylight saving time and standard time - Correction to Bitcoin network hashrate
|
|
|
Are there any plans to incorporate DTSM's miner into awesome miner? I have been trying to add it myself via the managed template and generic miner option, but i am a bit confused on what to add for command line options. I have been unable to find any help on this or what awesome miner expects for this section. Any help would be appreciated. all ready asked an the Answer was hell look at it an maybe .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner.. I do get many requests for features and mining software, and I try to implement the most requested features. Are you using the exact same command line arguments for the Generic Miner in Awesome Miner, as you use when manually launching the DTSM miner? Any output in if you use the Diagnostics button in the toolbar?
|
|
|
Can you try to toubleshoot this by adding an action of the type Notification instead, so you see if the rule triggers correctly. The fact that many kinds of mining software doesn't have a good way to support pool switching, that could also be the issue. Awesome Miner tries to workaround that by reconfiguring the miner and restart it, but it could be something here I need to investigate more.
it did give me a Notification if I Understood what you wanted I left the pool switch in an also added type Notification and it gave me a Notification or popped one under Notifications with no description the pool didn't switch .. this one is using EWBF's CUDA Zcash miner for NV cards it was a 1070 and 1080 .. At 8 pm i have one of my Scrpt miners setup to switch and that does appears to be working it went to the pool i have set in awesome right a way, hoping it will switch at 8 pm .. it's using CGminer it did Switch at 8 pm on the ASIC Scrpt miner or A4 Dominator .... I will have to look into the Change Pool trigger. For ASIC's that command is almost always supported, which is why it works fine on your scrypt miner. Awesome Miner is however doing some tricks to change pools on GPU mining software that doesn't support it - but I need to investigate why this action doesn't do it properly. In Awesome Miner 4.2 you also have the "Apply Managed Template" action, where you not only can change pool, but also algorithm, mining software and more. In fact, way more powerful than just chaning the pool. Maybe this one works better in your scenario?
|
|
|
I'm trying to get statistics on SMART but it doesn't seem to work.
Awesome Miner seems to have SmartCash as SHA-3 algo and is for some reason using very different stats than whattomine. I've added SMART as a new coin under "Coins & Profit > Statistics" and added its json URL but it doesn't work (have changed update interval to 2 minutes).
Other coins I've added the same way works great. But not SMART. Any ideas?
I don't think Awesome Miner has this coin built-in at all. Also, please note that you have both "SmartCash SMART (SHA3/Keccak)" and another coin called "Smartcoin SMC (X11)" listed on WhatToMine: https://whattomine.com/coins/197-smart-keccakhttps://whattomine.com/coins/159-smc-x11Is it "SmartCach SMART (SHA3/Keccak)" you want to use but get incorrect stats for? I'm trying to add SmartCash (197) and have added its json to Awesome Miner. I've also added it as a coin manually but I don't think that matters (tried without it as well). Or are you saying that the SmartCash that was added to SHA-3 is the one I should use? If so, then it's very out of date on prices I think. Sorry if I'm doing something wrong, I really want everything to work properly before I purchase a license. Thanks! I tried to add SmartCash with the JSON link, and it is showing up in the Coins tab. I did however notice that on the WhatToMine web site, they currently have a warning notice on this specific coin "Active(lagging)", indicating that the coin stats can be outdated. Awesome Miner is simply displaying the statistics from WhatToMine, so if there are delays in the statistics on their site, the same numbers will show up in Awesome Miner.
|
|
|
Hello guys, need help to config my pools . I did everything from the WEB but still not working I'm trying to set up pool for PIRL and there is some more commands in command line witch i'm not sure where to write it . esm 0 -mode 1 -ethi -16384 -erate 1 -wd 1 -allcoins 1 -- like this In pool properties there is Claymore pool settings, so in the settings i put ESM -> value 0 and same for other options but it's not working On Advanced there is option ADD pool specific command line , so i just copied this line -esm 0 -mode 1 -ethi -16384 -erate 1 -wd 1 -allcoins 1 and add it there - NOT working . I know it's should work , just don't know how to config it and same story with coin balance ... What Block explorer API URL i shoud post for ethermine.org like examp? Any advise will be helpful Can you use the Diagnostics button in the toolbar to verify if any of these commands are sent correctly to the Claymore mining software? Ethermine is a mining pool and will not work with the Wallet Balance feature in Awesome Miner. I will add support for pool balance feature in the future.
|
|
|
I'm trying to get statistics on SMART but it doesn't seem to work.
Awesome Miner seems to have SmartCash as SHA-3 algo and is for some reason using very different stats than whattomine. I've added SMART as a new coin under "Coins & Profit > Statistics" and added its json URL but it doesn't work (have changed update interval to 2 minutes).
Other coins I've added the same way works great. But not SMART. Any ideas?
I don't think Awesome Miner has this coin built-in at all. Also, please note that you have both "SmartCash SMART (SHA3/Keccak)" and another coin called "Smartcoin SMC (X11)" listed on WhatToMine: https://whattomine.com/coins/197-smart-keccakhttps://whattomine.com/coins/159-smc-x11Is it "SmartCach SMART (SHA3/Keccak)" you want to use but get incorrect stats for?
|
|
|
Can you please provide a screenshot of your Pool Properties dialog in Awesome Miner as well? (You can blank out sensitive parts like your e-mail and wallet address)
Here it is: Thanks Can you try to leave the worker name field empty?
|
|
|
Hi Patrike, is possible to create a rule to periodically change of mining pool (by specified time, not by profit) something like each 6 or 8 hours? Could you please provide an example? Thanks
You can define a rule with a Time trigger that fires at 6 AM, with the action Miner Command -> Change Pool to YourPool#1 Then you define a second rule, with a Time trigger that fires at 2 PM, with the action Miner Command -> Change Pool to YourPool#2 Then a third... Please make sure that all three rules are enabled once you added them. Hey Patrike I setup four rules 6 hours a part to switch pools and no pools switched after 6 hours, so i set it to switch every hour with two rules, it still didn't switch pools with GPU mining. Haven't tired with ASIC miners yet i saw it's possible ... Is there more i need on I might have turned off ? ... Can you try to toubleshoot this by adding an action of the type Notification instead, so you see if the rule triggers correctly. The fact that many kinds of mining software doesn't have a good way to support pool switching, that could also be the issue. Awesome Miner tries to workaround that by reconfiguring the miner and restart it, but it could be something here I need to investigate more.
|
|
|
Here is an idea on a new feature to improve profit switching performance and profit. Would it be possible to add a setting that tells awesomeminer to only switch to a new algorithm/pool if the profit is x% higher than the current pool? Sometimes it will switch to a new pool for a small gain in profit which causes downtime.
I'm planning to implement a feature for this.
|
|
|
Hi Patrike,
When using profit switcher and switch to Equihash coin, often my miner goes "Interface offline" and never switch to another coin until I restart miner manually. It happen when EWBF return "ERROR: API bind error". I tried to set rule to restart miner when it detect Offlne, but it doesn't help. I set Trigger; - Detect offline, 30 second, - Time interval: 0hours, 1munutes, 0seconds and Actions; - Stop miner - wait 5 seconds - Start miner
As I just added new computer to mine (my 3rd Rig), I'm planning to buy Standard version but I want to make sure this problem to be solved before purchase. This problem only happen to my GTX1070 Rigs (Rig 1 and 2) and not for GTX1060 Rig (Rig3). Any suggestions?
First verify that the rule is Enabled (the checkbox). Next, please send me the log file (toolbar: Tools -> Log File) and let me know the name of the miner that didn't trigger the rule as expected. Thanks!
|
|
|
1) Awesome Miner allows specification of the Pool worker name in the middle by using the following syntax: EWALL/[MinerWorker]/EMAIL [MinerWorker] will be replaced with the miner specific worker name specified in the miner properties, Add to worker name. Have you configured a "Add to worker name" for your Managed Miner?
Yep, I got 2 Managed miners going on Ethermine pools, they both get proper names (Miner.1, Miner.2). With Nanopool I did the exact syntax as it's explained in the help section, like you just wrote, and they both appear as "[MinerWorker]" in the pool account view. The email gets picked up correctly because Nanopool allowed me to change the settings for the account. Even tried custom separator, neither worked. 2) There are no Block Explorers for SIA that Awesome Miner supports. I do get many requests about getting more coins to work for the Balance feature, but the challenge is that most API's out there are different for each coin, making it very difficult to have a general support for any coin. This one has support for many coins and works with Awesome Miner, but unfortunately SIA is not one of them: https://chainz.cryptoid.info/Cool. I tested the Sia API for that wallet and it gave me a result { "status": true, "data": 123.01234567891 } So I thought I had configured it wrong. Thank you so much for answering and fantastic job on Awesome, it really is awesome. Can you please provide a screenshot of your Pool Properties dialog in Awesome Miner as well? (You can blank out sensitive parts like your e-mail and wallet address)
|
|
|
N00B Question, so please forgive me in advance I am relatively new to mining and have my first rig up and running on Nicehash (6) 580's and (6) 1070's. I just purchased Awesome Miner and am overwhelmed with trying to figure this thing out. My goal is to let the rig mine the most profitable and deposit the coins that it's mining into the appropriate Bittrex wallet for that coin. I am more interested in collecting individual coins than converting over to one particular coin, however, I just signed up for MiningPoolHub and see that they offer to transfer all mining to any particular coin, which is interesting to me. What I need help with is how to set up Awesome Miner so that if it's mining ETH, it desposits into my ETH wallet on Bittrex. If it's mining ZCash, it deposits into ZCash wallet on Bittrex, etc. Again, I'm very new to this so please be gentle If someone knows of a resource to find this info in laymans terms, I would very gladly read and do it myself, it's just a bit overwhelming with all of the info out there, so I figured I would ask the experts See the section "Custom pools" on this page for information about how to add one or many user defined pools the the profit switcher: http://www.awesomeminer.com/help/profitswitching.aspx#configureHow coins deposits works are more related to which mining pool you are using. You can add any pool to Awesome Miner and specify worker name and so on. Some pools allow you to specify the payout address directly in the Worker name or Wallet address in the pool properties. Other pools requires you to sign up with a username, and on the pool web site you specify payout address. The exact process for this depends on the mining pool you use.
|
|
|
Hi everyone, few questions regarding Awesome: - Never got the Nanopool miner name working, same as described in this post
. Is there really a setup where this [MinerWorker] works? - Anyone else got Sia wallet balance correct? I'm using nanopool API with wallet address and it fails to update. Tried changing several option, none of them seems to work.
If anyone has an answer to this, I'd appreciate it. Thanks. 1) Awesome Miner allows specification of the Pool worker name in the middle by using the following syntax: EWALL/[MinerWorker]/EMAIL [MinerWorker] will be replaced with the miner specific worker name specified in the miner properties, Add to worker name. Have you configured a "Add to worker name" for your Managed Miner? 2) There are no Block Explorers for SIA that Awesome Miner supports. I do get many requests about getting more coins to work for the Balance feature, but the challenge is that most API's out there are different for each coin, making it very difficult to have a general support for any coin. This one has support for many coins and works with Awesome Miner, but unfortunately SIA is not one of them: https://chainz.cryptoid.info/
|
|
|
Hi Patrike
Please add a "Notice" field in "Pool properties" dialog. Some pool configuration use wallet address as worker name. In this field user will write to which location belong this wallet address (Local wallet or some exchange wallet, etc.)
Thanks for the suggestion. I've had similar requests about miners, that it should be possible to leave a "Note" on them. When I implement that for the miners, I could do it for the pools as well.
|
|
|
Hello Patrike, I would have a suggestion regarding profit switching. As you can see in the picture below, i defined a profit profile for each type of graphic card i own in my rigs.
I then defined a profile group for each of my rig to have exact stats regarding income. In profit group window, can you add an option to set up a specific profit switching profile.
This way it could be possible to have one rig that switch mining between nicehash and an ethereum pool, another rig that switch between zpool and a zcash pool.
It would be a great addition !
Today the pools for the profit switcher are defined on a global level (Options dialog, Profit switching). I assume want want this per profile (or group profile)? I've had similar requests in the past to have have the profit switcher working on multiple set of pools, where not all miners would use the same pools.
|
|
|
Is support coming for the rapidly growing list of CryptoNight miners out there? xmr-stak xmrig cast-xmr
These are quickly growing as the CryptoNight scene is exploding and Claymore's XMR miner is lagging hard in the competition.
I need support for these and will be upgrading my license once one/some of them are supported..
I'm planning to implement support for XMR-Stak, but right now it's only their CPU miner that has a monitoring API for Awesome Miner to use. The AMD and nVidia miners only have a web interface, but no API. Then we have this one: https://github.com/xmr-stak/xmr-stakThis one claims to unify all of them, but when looking at the releases, it's first of all no release the last 4 months and the precompiled releases are not there in contrast to what their readme-file states. Any suggestions from those of you with more experience in this software are apprecated. Thanks!
|
|
|
Hi Patrike, is possible to create a rule to periodically change of mining pool (by specified time, not by profit) something like each 6 or 8 hours? Could you please provide an example? Thanks
You can define a rule with a Time trigger that fires at 6 AM, with the action Miner Command -> Change Pool to YourPool#1 Then you define a second rule, with a Time trigger that fires at 2 PM, with the action Miner Command -> Change Pool to YourPool#2 Then a third... Please make sure that all three rules are enabled once you added them.
|
|
|
|