Thanks, also found myself this one for sharing: https://www.youtube.com/watch?v=EMSJDhacNL4No live pics, only race data. EDIT: Out of sMerit, so +1 WOsMerit for the livestream (no sound, though, but it's cool for me without) |
|
|
|
I have no idea what's happening, but this makes me happy!  Birth of a legend?  Anyone with a link to a free livestream? |
|
|
|
I just got back from seeing a friend. He's been in and out of Bitcoin since 2017 (lost money of course). Did the usual what about these shitcoins thing, which I dismissed as well as I could. Anyway he said he has been trying to withdraw as much equity from his home as he can for the last several weeks. Should get it in a week or 2. He then says he was going to buy bitcoin with it when it was in the 50s and now he's really glad that it fell because he's going to be able to buy much more.
He agreed with me that holding was the way, lessons from past sales learnt.
Foolish, I will say though that if you are in your 20's go for it lol... you can recover from losses in your early years and learn a lesson, not in your later years (50 +) someone bought at $60k +, wonder how they are feeling right now My wife bought at $60k+  She's feeling fine, because i taught her not to look at the chart for quite a while after buying. Regardless, she's #hodling so she won't care shit about this correction some years later. Half of my buys turned to "losses" afterwards, in the long run every buy turned into a gain. This will continue as long as i hodl and the absolute top was not in yet. Sure, i feel regretful when Bitcoin price is falling, every time. But it's because i think Bitcoin is much more worth than that and it should only go up (which it does, in the long run). |
|
|
|
|
Some of us are just still used to the rising from Q4/2020 to the beginning of Q2/2021.
It's like "bull's hangover", which is to be followed by recovery and finally you go to another party next weekend.
|
|
|
|
Since it's shortly before EOM i bought a little of this dip It's going on and on and on  LOL I'm a hodler, for 96% of my stash (and slowly growing). 4% are destined for financing building extensions to my house, those will be spent soon, so it's 100% hodl from that time on. So far i was always in profit - in long and medium terms. |
|
|
|
Since it's shortly before EOM i bought a little of this dip It's going on and on and on |
|
|
|
So i came back home from work, fucking tired ...until i checked the chart  It's future expiry time again, isn't it? |
|
|
|
Better than my guess for the contest:
69,820 MishaMuc
70,000 philipma1957
70,500 Slot Kid
71,500 fillippone
72,239 cAPSLOCK*
72,400 Phil_S
72,555 OutOfMemory
What if the price is $ 72,401? Would Phil_S win, because his guess is more close or would i win, because the price would be over Phil_S's guess?  Maybe I'm definitely not normal, but in a good way  |
|
|
|
Better than my guess for the contest:
69,820 MishaMuc
70,000 philipma1957
70,500 Slot Kid
71,500 fillippone
72,239 cAPSLOCK*
72,400 Phil_S
72,555 OutOfMemory
What if the price is $ 72,401? Would Phil_S win, because his guess is more close or would i win, because the price would be over Phil_S's guess? |
|
|
|
Slow upwards grind now until the end of summer & then moon? We can hope hey but oh my, those couple of weeks were horrible. I have to admit I was petrified haha, sold nothing though.
Why would you? Unless you'd need the fiat, of course. |
|
|
|
I need to learn some terminology, what's slicing?
Holy moly 2900 bucks A YEAR for autodesk.
I have recently just got into 3D printing myself (funny how that happens hey) Picked up an ender 3 V2 and really enjoying the experience. I am now about to embark on building my own from scratch based on the Hypercube Evolution. BTW I use CURA for slicing. Seems to do a very reasonable job and I also play around with tinkercad and have had pretty good results so far. Struggling a little with PETG printing though but PLA is is a breeze. You always tend to get stringy results with PETG/CEP when you don't have a cabin. Built my own, now it's working much better. EDIT: And reduce cooling fans to 10% or even "off" when printing PETG, while the travel speed (moving between printing paths) should be as fast as possible, which keeps down the stringing. Print at low speed, about half of PLA. @Arrie: I'm using "3D Builder" (Yeah, it's Micro$oft, but free) for easy modeling. It's half intuitive. Just define, place and combine (or exclude) simple 3d objects to make more or less complex structures. Didn't master the learning curve with the free CAD proggies. I'm using Cura as slicer. Good enough. Thanks, I'll take a look at that. However, worth to add is that i found out if you want to model threads, 3D Builder is unusable. You'd need Fusion360 or one of the free 3D CAD programs. No easy way to get threads, that's why i still cut them in metal and press/glue them into the 3D prints. |
|
|
|
...The only thing it will change is you'll become a rich old fuck when you will sell your coins for evil fiat (because you won't be able to buy shit with bitcoins in your lifetime) and still embrace the materialistic consumerist society, whose only aspirations from what i read is slapping models on a yacht and buyin lambos Slapping models? ...Lambos? ...Yachts?! You sure mean a different thread... We here are all about humping cows on the golf course of a bigass ranch in the middle of Nowhere, Texas. Wait, are you one of those future-kids? |
|
|
|
I need to learn some terminology, what's slicing?
Holy moly 2900 bucks A YEAR for autodesk.
I have recently just got into 3D printing myself (funny how that happens hey) Picked up an ender 3 V2 and really enjoying the experience. I am now about to embark on building my own from scratch based on the Hypercube Evolution. BTW I use CURA for slicing. Seems to do a very reasonable job and I also play around with tinkercad and have had pretty good results so far. Struggling a little with PETG printing though but PLA is is a breeze. You always tend to get stringy results with PETG/CEP when you don't have a cabin. Built my own, now it's working much better. EDIT: And reduce cooling fans to 10% or even "off" when printing PETG, while the travel speed (moving between printing paths) should be as fast as possible, which keeps down the stringing. Print at low speed, about half of PLA. @Arrie: I'm using "3D Builder" (Yeah, it's Micro$oft, but free) for easy modeling. It's half intuitive. Just define, place and combine (or exclude) simple 3d objects to make more or less complex structures. Didn't master the learning curve with the free CAD proggies. I'm using Cura as slicer. Good enough. |
|
|
|
Buy the dip  Thanks, two years ago i had my vasectomy which cost me $600. Now you basically told me i could have bought the 2019 Dip with $70k instead...  EDIT: I just wanted to tell you guys, i had to sell (less than 1% of my stash) to be able to pay my new doors for the house extension, almost exactly at trend reversal. I knew this. I just had no choice. NOT a Mindrust event. I wish they could have delivered the doors with one or two weeks of delay  Those must have been some MIGHTY doors  Unfortunately not. Prices increased roughly 30% this production cycle, the doors are solid, higher quality and sound damping, for sleeping rooms of me&wife and our youngest child's room, right next to it. Hey, i'm not the youngest but i still have a sex life EDIT: Forgot the main point. It's not the price of the doors, it's more the size of the stash. But i'm good, i could still be a nocoiner, you know... |
|
|
|
Buy the dip Thanks, two years ago i had my vasectomy which cost me $600. Now you basically told me i could have bought the 2019 Dip with $70k instead... EDIT: I just wanted to tell you guys, i had to sell (less than 1% of my stash) to be able to pay my new doors for the house extension, almost exactly at trend reversal. I knew this. I just had no choice. NOT a Mindrust event. I wish they could have delivered the doors with one or two weeks of delay |
|
|
|
like i give a fuck about your opinion lol who do you think you are augustus of moronus
i will not post shitcoin charts allright but u can still go fuck yourself
these guys i swear you think you're the elite of the world because you own bitcoins haha
Thats not the point, Mr. Genius. Hint: The title of this thread. Regardless of how much OT, spam, fun&giggle posts, when it comes to crypto, it's only for Bitcoin in here. |
|
|
|
i swear if doge falls to 0.2 i will break my rules and rawdog it >Edit : on second thought and after taking a step back 0.13 being the likely low before shoulder i will reassess  ok buddy you've had your fun but now you can fuck right off, thanks posting shitcoin charts is NOT happening here, go away you asshole I can't believe you don't have that ... on ignore yet. A no brainer after his second of recent posts here, or so. |
|
|
|
Okay f*****s who sold, you told me you are not selling, i thought we had a deal we are hodling
I am poor now
1 year ago i was ultra poor
Well back to cage to sleep for a few more years
Sarcasm press
*yawn* Who cares? All that counts is who bought! Do you know about Mindrust already? |
|
|
|
Looking for a double bottom there? |
|
|
|
Did it ever went down midcycle (similar position) below the prior ATH?
Nope. Therefore, unless we are witnessing something entirely new, somewhere around 25K could be a "natural" attractor because it corresponds to roughly 61.8% decline (Fib number) IF we will go below the prior one (50%, where we are right now, give or take).
Because of this, it either bounce here or at 25K (plus minus a thou or half a thou), IMHO.
With so many liquidated leveraged trades, the "bounce" will likely start as a "crawl". But anyway, i'm good with how things are. Mostly anytime. |
|
|
|
|
Show Posts
