|
rawbot
|
 |
January 31, 2017, 11:21:44 PM |
|
Can anybody tell me what the best crimson driver version is to use for Windows 10 for a 6 gpu rig (Sapphire RX 470 8gb cards)? I think 16.11.5 beta is installed right now
Also what is the best mining pool to use with Claymore?
|
|
|
|
|
mafaz
Newbie
 Offline
Activity: 48
Merit: 0
|
|
January 31, 2017, 11:53:10 PM |
|
Hi i got 6 elpida 4 hynix 1 samsung rx 470
Rig with 3 elpida 3 hynix ones is running great.
Rig 2 with 3 elpida 1 hynix 1 samsung..... one gpu gets a high load of rejected shares.... might it be some faulty gpu or what might be the reason for it? I use same afterburner settings for all of them on both rigs and only 1 gpu is having problems...
|
|
|
|
|
Encho
Newbie
Offline
Activity: 10
Merit: 0
|
|
February 01, 2017, 04:53:43 AM |
|
I dont mind a few % rejects, its realy a small amount.
The temperatures are the problem, i can get the RX series cards to 70 - 74 degrees, which is not that bad, but the 79xx series just goes 80+ hehe.
Can anyone tell me what the degrees are on 280x cards for istance? Im guessing they overheat to, since its basicly at 7970 repacked.
Regarding those RX, set the core clocks to 1050, thank me tomorrow  |
|
|
|
|
|
Pennywis3
|
|
February 01, 2017, 07:41:04 AM
Last edit: February 01, 2017, 07:51:32 AM by Pennywis3 |
|
I dont mind a few % rejects, its realy a small amount.
The temperatures are the problem, i can get the RX series cards to 70 - 74 degrees, which is not that bad, but the 79xx series just goes 80+ hehe.
Can anyone tell me what the degrees are on 280x cards for istance? Im guessing they overheat to, since its basicly at 7970 repacked.
Regarding those RX, set the core clocks to 1050, thank me tomorrow Thanks for the tip, im trying it out. So far, ETH drops from 24Mh/s to 20MH/s  Anyway, im geting bad results on SApphire Nitro+ RX 480 4GB About 24MH/s ETH + 1.1Gh/s Decred is the best i can do at 1300/2000 Kinda sux, seeing people are geting 28Mh/s ETH on 470's. Even if i tune down Decred to oblivion, ETH won't go past 24.5Mh/s Noobs shouldn't mine hehe. |
|
|
|
|
|
big_daddy
|
|
February 01, 2017, 08:22:24 AM |
|
hi there, is there any alternative pool for DCR in dual mining? this http://yiimp.ccminer.org/ is crashing this is the third time in the last 7 days.... |
If you don't believe it or don't get it, I don't have the time to try to convince you, sorry.
|
|
|
ronald88
Newbie
Offline
Activity: 14
Merit: 0
|
|
February 01, 2017, 09:40:31 AM |
|
Why my miner wont connect to eu1-etc.ethermine.org Huh help
|
|
|
|
|
|
rawbot
|
|
February 01, 2017, 04:33:18 PM |
|
Best Crimson driver version for Windows 10 x64 anybody? I have 6 x RX 470 8gb gpus. Will the latest driver be OK?
|
|
|
|
|
ihong154
Member
Offline
Activity: 64
Merit: 10
|
|
February 01, 2017, 04:55:53 PM |
|
Best Crimson driver version for Windows 10 x64 anybody? I have 6 x RX 470 8gb gpus. Will the latest driver be OK?
I'm using 16.10.3 with 470 4gb. Hashing at 27.5-28MH. |
|
|
|
|
mettalmag
Legendary
Offline
Activity: 1084
Merit: 1003
≡v≡
|
|
February 01, 2017, 07:14:26 PM |
|
3x RX480 8G
h81m-k mobo
bios low pow mod 29Mhs
one of the GPU refuses to mine on that speed and mines under 15Mhs, it started today, couple hrs ago.
Any ideas ?
|
|
|
|
|
|
BogdanCo
|
|
February 01, 2017, 09:19:25 PM |
|
3x RX480 8G
h81m-k mobo
bios low pow mod 29Mhs
one of the GPU refuses to mine on that speed and mines under 15Mhs, it started today, couple hrs ago.
Any ideas ?
Connect a monitor to that GPU and se how it goes  |
|
|
|
|
|
Eyedol-X
|
|
February 01, 2017, 09:25:02 PM |
|
3x RX480 8G
h81m-k mobo
bios low pow mod 29Mhs
one of the GPU refuses to mine on that speed and mines under 15Mhs, it started today, couple hrs ago.
Any ideas ?
timings are too high for the memory or the memory is clocked too high, the lower power mod I have clocks memory at 2125 using 1750 timings. On some of my cards I had to back the memory back to 2050mhz to get stable, does about 28.8mh at that speed for me. I have several rigs that the mod works fine on with reference cards but 1 rig I just tried yesterday, only 1 of the cards works and the other 3 hash super low so I'll have to do the above to fix it most likely. It boils down to not every card performs the same as another even though the majority of the cards work fine, not all do. |
|
|
|
|
mettalmag
Legendary
Offline
Activity: 1084
Merit: 1003
≡v≡
|
|
February 01, 2017, 09:30:02 PM |
|
3x RX480 8G
h81m-k mobo
bios low pow mod 29Mhs
one of the GPU refuses to mine on that speed and mines under 15Mhs, it started today, couple hrs ago.
Any ideas ?
timings are too high for the memory or the memory is clocked too high, the lower power mod I have clocks memory at 2125 using 1750 timings. On some of my cards I had to back the memory back to 2050mhz to get stable, does about 28.8mh at that speed for me. I have several rigs that the mod works fine on with reference cards but 1 rig I just tried yesterday, only 1 of the cards works and the other 3 hash super low so I'll have to do the above to fix it most likely. It boils down to not every card performs the same as another even though the majority of the cards work fine, not all do. 3x RX480 8G
h81m-k mobo
bios low pow mod 29Mhs
one of the GPU refuses to mine on that speed and mines under 15Mhs, it started today, couple hrs ago.
Any ideas ?
Connect a monitor to that GPU and se how it goes Thanks for responses, I'm managing them remotely so plugging a monitor is a one day case, but I'll try that. Also this rig was mining eth from August then Zec then Eth again, I've got 300+ cards moded with low power rom but for now only two of them has those kind of errors. I'll post which method will help. |
|
|
|
|
Joelite
Newbie
Offline
Activity: 10
Merit: 0
|
|
February 02, 2017, 01:39:07 AM |
|
Hi guys, I have a problem, I search it in the thread and I couldn't find anything.
I recently build this:
MSI Z97 Gaming 5
I5 4K
Sapphire RX480 8Gb Nitro+ OC
1200w Corsair HX supply power
16Gb Kingston DDR3
SSD Samsung 256Gb
...
So, when I start mining, I lost the wifi connection from all of my devices... when I was mining with 2 RX on my last mobo, an asus, I have no problems before...
Could be the drivers?
Only happens when the claymore start to mine...
|
|
|
|
|
mrmaigo
Newbie
Offline
Activity: 16
Merit: 0
|
|
February 02, 2017, 01:53:48 AM |
|
Hi guys, I have a problem, I search it in the thread and I couldn't find anything.
I recently build this:
MSI Z97 Gaming 5
I5 4K
Sapphire RX480 8Gb Nitro+ OC
1200w Corsair HX supply power
16Gb Kingston DDR3
SSD Samsung 256Gb
...
So, when I start mining, I lost the wifi connection from all of my devices... when I was mining with 2 RX on my last mobo, an asus, I have no problems before...
Could be the drivers?
Only happens when the claymore start to mine...
When you say "all of my devices", you mean in the room/building? |
|
|
|
|
aceshigh007
Newbie
Offline
Activity: 2
Merit: 0
|
|
February 02, 2017, 02:47:15 AM |
|
Hey guys, any ideas why I keep getting "authorization failed : null" when I try to dual etc-dcr mine? Once it starts mining, all DCR shares are rejected...
I have 3 rigs, 2 are successfully dual mining (nanopool+suprnova), but my 3rd keeps getting authorization failed...
RIG 1 : 2x rx470 (Successful)
RIG 2 : 2x rx470 oc (Successful)
RIG 3 : 2x rx480 oc (authorization failed : null) when connecting to DCR pool
I use this command for the rigs :
EthDcrMiner64.exe -epool etc-us-east1.nanopool.org:19999 -ewal address/rig3/email@gmail.com -epsw x -dcri 20 -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal user.rig3 -dpsw x
Been looking around and not finding any leads to solve this issue.
Thanks in advance!
|
|
|
|
|
Joelite
Newbie
Offline
Activity: 10
Merit: 0
|
|
February 02, 2017, 12:09:16 PM |
|
Hi guys, I have a problem, I search it in the thread and I couldn't find anything.
I recently build this:
MSI Z97 Gaming 5
I5 4K
Sapphire RX480 8Gb Nitro+ OC
1200w Corsair HX supply power
16Gb Kingston DDR3
SSD Samsung 256Gb
...
So, when I start mining, I lost the wifi connection from all of my devices... when I was mining with 2 RX on my last mobo, an asus, I have no problems before...
Could be the drivers?
Only happens when the claymore start to mine...
When you say "all of my devices", you mean in the room/building? Yes sir, only when the EthDcrMiner64.exe starts |
|
|
|
|
|
rawbot
|
|
February 02, 2017, 12:21:51 PM |
|
Windows 10 defender had blocked the claymore miner due to a virus detected. Is this a false positive?
|
|
|
|
|
mrmaigo
Newbie
Offline
Activity: 16
Merit: 0
|
|
February 02, 2017, 12:40:31 PM |
|
Hi guys, I have a problem, I search it in the thread and I couldn't find anything.
I recently build this:
MSI Z97 Gaming 5
I5 4K
Sapphire RX480 8Gb Nitro+ OC
1200w Corsair HX supply power
16Gb Kingston DDR3
SSD Samsung 256Gb
...
So, when I start mining, I lost the wifi connection from all of my devices... when I was mining with 2 RX on my last mobo, an asus, I have no problems before...
Could be the drivers?
Only happens when the claymore start to mine...
When you say "all of my devices", you mean in the room/building? Yes sir, only when the EthDcrMiner64.exe starts Huh. I'm assuming you're using a router and not providing wifi from the miner. Is the router on the same power strip? Maybe even the same breaker? If it isn't and it's purely an RF interference issue... something is stepping on the FCC's toes. Find it and RMA it. That's kind of a long shot. Gonna need more info. |
|
|
|
|
|
rawbot
|
|
February 02, 2017, 03:01:26 PM |
|
I am confused about the claymore command line. I am trying to configure nanopool but do I have to add their payment address as well as mine?
for example
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 0x52bc44d5378309ee2abf1539bf71de1b7d7be3b5 -ewal mypaymentaddress/workername/email -mode 1
The bold underline is what I am not sure about. Do I have to add nanopool's payment address as well as mine. If I do is it in the correct place in the above command?
|
|
|
|
|
mrmaigo
Newbie
Offline
Activity: 16
Merit: 0
|
|
February 02, 2017, 03:04:06 PM |
|
I am confused about the claymore command line. I am trying to configure nanopool but do I have to add their payment address as well as mine?
for example
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 0x52bc44d5378309ee2abf1539bf71de1b7d7be3b5 -ewal mypaymentaddress/workername/email -mode 1
The bold underline is what I am not sure about. Do I have to add nanopool's payment address as well as mine. If I do is it in the correct place in the above command?
No. No you don't. |
|
|
|
|
|
