Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[DavidC1]

Performance is about the same, but the AMD blockchain drivers have an 8 card limit. The Crimson Relive 17.11.x and Adrenalin 17.12.x drivers let you run at least 13 cards and are compatible with the Windows 10 v1709 fall creators update.

How do you get the new drivers to have equal performance to the blockchain one? Even with compute the performance loss is there. 28MH/s to 26.5MH/s for example.

[MagicSmoker]

I had the ports open from my second router, to monitor the rigs while I was adding a new router with 4G support for redundancy, and was still configuring ports for my Personal VPN through the mobile network, when the alarm set of.
I had different attacks from China and Russia over the last week, but today was directly to the mining port, scanning and trying to reboot. Thankfully I am on a simple dynamic IP setup so I can easy change IP with a simple restart.

Ah, you were shodan'ed...

[npittas]

Yeah, probably, but next time they will mine since I attached a simple mining server to claymore's default ports!! Please hack me and make me rich!!

[dexterop]

Temperature control thread hangs, need to restart miner!
 SC: 01/09/18-00:18:18 - New job from hub.miningpoolhub.com:20550
 SC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
Quit, please wait...
Setting DAG epoch #58 for GPU1
Create GPU buffer for GPU1
GPU1 DAG creation time - 5391 ms
Setting DAG epoch #58 for GPU1 done
Restarting OK, exit...

I got this very often.  -ttly option does not work.

Windows 7 sp1 x64, miner 10.3
Recent drivers for two cards Nvidia GTX 970 and Radeon R7 260

[ciripel1289]

Ok. So i have setup claymore miner in Xubuntu 16.4.3 and this program run's a reboot.sh script if something goes wrong. My problem is that the script does not execute the first time after a startup of the system.

I get these errors.

_{Failed to set wall message, ignoring: Interactive authentication required.
Failed to reboot system via logind: Interactive authentication required.
Failed to start reboot.target: Interactive authentication required.
See system logs and 'systemctl status reboot.target' for details.
Failed to open /dev/initctl: Permission denied
Failed to talk to init daemon."}

If i restart claymore miner and he needs to run the reboot.sh second time the system will restart.

Please help.

[minertwenty49er]

anyone see problem running 6 rx480 and dual mining ETH and MUSIC ?

[MagicSmoker]

Yeah, probably, but next time they will mine since I attached a simple mining server to claymore's default ports!! Please hack me and make me rich!!

Ingenious! How are you pulling that off, as it sounds like particularly appropriate punishment for the vermin!

anyone see problem running 6 rx480 and dual mining ETH and MUSIC ?

Yes, because these coins use the same algorithm - ethash.

[Cruz180]

Performance is about the same, but the AMD blockchain drivers have an 8 card limit. The Crimson Relive 17.11.x and Adrenalin 17.12.x drivers let you run at least 13 cards and are compatible with the Windows 10 v1709 fall creators update.

How do you get the new drivers to have equal performance to the blockchain one? Even with compute the performance loss is there. 28MH/s to 26.5MH/s for example.

You already checked that ? I also use blockchain drivers. This version 17.12 have also dag fix ?

[ben8jam]

Temperature control thread hangs, need to restart miner!

I'm getting this too. But on Linux. 10.2 version. Wasn't happening on 10.1. Happens quite a lot now but only on one rig.

[muzuca]

anyone see problem running 6 rx480 and dual mining ETH and MUSIC ?

I'm mining ETH + DCR and I'm getting the best profitable combination, try in coinmine or suprnova pool.

[jonathanheltz]

Any advice on how to mine to separate wallets on the same rig using only a portion of the available cards for each? For example, I have 4 RX 580 cards and my buddy is buying 2 more to install on my rig. We will split the profits 75/25 after electrical and overall rig costs but I’m wondering if it’s going to be easy to do this by running 2 separate instances of the Claymore miner with only certain cards enabled on each one. Thanks.

[jackbox]

Any advice on how to mine to separate wallets on the same rig using only a portion of the available cards for each? For example, I have 4 RX 580 cards and my buddy is buying 2 more to install on my rig. We will split the profits 75/25 after electrical and overall rig costs but I’m wondering if it’s going to be easy to do this by running 2 separate instances of the Claymore miner with only certain cards enabled on each one. Thanks.

Yes, did you read the first post of the thread? It has all the options. Run Claymore twice and use the -di option. This will determine which cards that instance will mine.

-di    GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs (#0 and #2).

[DedMorozAU]

Anyone knows when 10.3 for Linux planned to release?
Using 10.2 on Ubuntu 16.04 with dual mining, but quite often getting error Out Of Memory: Out of memory: Kill process 1842 (ethdcrminer64) score 0 or sacrifice chil. Any idea why? thanks

[Bael]

Anyone knows when 10.3 for Linux planned to release?
Using 10.2 on Ubuntu 16.04 with dual mining, but quite often getting error Out Of Memory: Out of memory: Kill process 1842 (ethdcrminer64) score 0 or sacrifice chil. Any idea why? thanks

Hi

Regarding your question I have no idea, I'm sorry, but I would like to take this opportunity to ask you

You have compared the mining of windows vs linux, does performance improve much?

I'm thinking about trying a rig with linux

[bithead007]

add -r and then add a reboot.bat file.  It will auto restart if failed card.

Thanks dude, didn't see there was a -r 1 to do this.
Have a good weekend.

Make sure your reboot.bat file has the Windows reboot command in it.

shutdown /r /t 5 /f

So I wondered about this. For me in V1709 Windows 10, it appears Microsoft broke the task scheduler. So for me I can't get the miner to start on reboot.  Doesn't this command restart the whole computer?

[jackbox]

add -r and then add a reboot.bat file.  It will auto restart if failed card.

Thanks dude, didn't see there was a -r 1 to do this.
Have a good weekend.

Make sure your reboot.bat file has the Windows reboot command in it.

shutdown /r /t 5 /f

So I wondered about this. For me in V1709 Windows 10, it appears Microsoft broke the task scheduler. So for me I can't get the miner to start on reboot.  Doesn't this command restart the whole computer?

I just put a shortcut to the start.bat in the startup folder and don't require a password to log on. Set Windows to boot to desktop and the miner will start automatically.

[hardworker27]

What is going on? Can anyone please tell me? ethOS+claymore 10.2 dual https://ibb.co/fAPRhR

[nadrojcote]

I'm posting this here in hopes that I can get some ideas as to what is happening. I'm getting really high hashrate that is stable. https://www.reddit.com/r/gpumining/comments/7p4wcp/changed_some_bios_settings_now_1070_and_1060_are/

[mymining888]

My antivirus removed the file as soon as it was available.

So ill keep off until some more comments are available

Dude this is clean google chrome blocks alot of miners use firefox to download them im using this on 10 different machines and no problem

[garybeng]

Have a question about the choice of motherboard for ethereum mining.
I am using a normal motherboard Asus Maximus VIII Hero mining with 6xAMD GPUs.
There are issues with stability like not recognizing all 6 gpu during bootup, system hangup, system reboot, high stale shares from time to time.
Using Windows 10 Pro build 1790 with AMD Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23 drives.
My question is whether using a BTC motherboard will be more efficient and will not encount above issues during mining?
Can anyone in the forum comment on this?
Thanks.