adaseb
Legendary
 Offline
Activity: 3752
Merit: 1709
|
 |
September 16, 2020, 07:27:39 PM |
|
There is now too much mining on this ethermine site, I changed the pool because I earn less money from the ETC worries!
Since then it's not great but I earn 70 $ more
ethermine is the largest pool, well suited for small miners like me)) I set retrydelay 5, the number of reconnections did not decrease unfortunately, but my stats on the pool improved. The more minors there are, the higher the hashrate will be but you will have less reward. I looked at 24H with 1GH / s of calculation ETH: ethermine : +/-870$/Monthly ETH: nanopool: +/-960$/Monthly I do not advertise the pools, but sometimes a pool with fewer people will sometimes be more profitable In addition I have more stale on ethermine ETH 17% at the moment It doesn't make a difference the amount of miners being connected to a specific pool. The profits overall with respect to variance should be the same. It's possible that you might get lucky and go on some small pool which had bad luck previously and you start mining and right away the pool finds a block and your reward for the day is higher. But it's not always like that. Hence it doesn't matter which pool as long as your pool fees are the same and you got very good ping, less than 50ms and you won't be affected by stale shares. |
|
|
|
|
|
|
|
|
"This isn't the kind of software where we can leave so many unresolved bugs that we need a tracker for them." -- Satoshi
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
batsonxl
Member
Offline
Activity: 1196
Merit: 26
|
|
September 17, 2020, 02:22:26 PM |
|
Please need help 1st time this happening.
My freind has pc : b450 mb ryzen5 1600 cpu 8gb ram 256gb m.2 sdd rx 480 8g windows 10 64 bit 2004
As soon as i use any strap command pc crashes. freeze on start up of claymore then restart. Without strap working 23-24Mhz
Im out of choises. thanks
|
|
|
|
|
|
br2459
|
|
September 17, 2020, 05:45:25 PM |
|
Please need help 1st time this happening.
My freind has pc : b450 mb ryzen5 1600 cpu 8gb ram 256gb m.2 sdd rx 480 8g windows 10 64 bit 2004
As soon as i use any strap command pc crashes. freeze on start up of claymore then restart. Without strap working 23-24Mhz
Im out of choises. thanks
You can remove the drivers with the DDU and if that doesn't fix it, reload windows 10. |
|
|
|
|
farsky
|
|
September 17, 2020, 08:01:20 PM
Last edit: September 17, 2020, 08:13:39 PM by farsky |
|
Please need help 1st time this happening.
My freind has pc : b450 mb ryzen5 1600 cpu 8gb ram 256gb m.2 sdd rx 480 8g windows 10 64 bit 2004
As soon as i use any strap command pc crashes. freeze on start up of claymore then restart. Without strap working 23-24Mhz
Im out of choises. thanks
i use driver 19.4.3 and mod vbios, so i not use strap low hashrate problem is solved like this: you need to enable calculation mode in the driver. But it doesn't work for me)) another way is to run the miner with administrator rights and press "y". Then close miner and restart the pc. then try low strap for example 4 or 6 All IP addresses (US, EU, Asia ethermine) according to Whois belong to Cloudflare. It has long been customary not to indicate the real IP address due to the threat of DDOS attacks.
Your problem most likely really lies in the VPN service. Try Windscribe, it has free gigabytes of trafic.
thanks i will try )) |
Rus fascists: Goran_, mp3.Maniac, Xommy, ivan1975, lovesmayfamilis, Excimer, leonello, Snork1979, be.open, K210, Azrieli.
|
|
|
fapar
Sr. Member
Offline
Activity: 1414
Merit: 267
Undeads.com - P2E Runner Game
|
|
September 18, 2020, 11:51:33 AM |
|
Please need help 1st time this happening.
My freind has pc : b450 mb ryzen5 1600 cpu 8gb ram 256gb m.2 sdd rx 480 8g windows 10 64 bit 2004
As soon as i use any strap command pc crashes. freeze on start up of claymore then restart. Without strap working 23-24Mhz
Im out of choises. thanks
First of all, you should show the parameters for starting the miner (config or start.bat). Is the modified vBIOS used or not; what is the driver version and is Compute Mode enabled? |
|
|
|
|
big_daddy
|
|
September 18, 2020, 09:33:50 PM |
|
~
just try another pool and you will compare the difference on your own example in a week from now maybe, you will earn even more than being connected to the biggest pool maybe = probably probably = for sure |
If you don't believe it or don't get it, I don't have the time to try to convince you, sorry.
|
|
|
michelem
Legendary
Offline
Activity: 1015
Merit: 1000
|
|
September 20, 2020, 06:55:09 AM |
|
Hey guys, I have some Nvidia P104-100 cards running with Claymore 15 and since yesterday they are not working anymore.
Problem is about DAG size the GPU has 4GB I thought I could mine until December instead suddenly no more mining with error: CUDA error - cannot allocate big buffer for DAG.
Is there a way to try to squeeze them more?
|
|
|
|
|
Dowper_
|
|
September 20, 2020, 06:55:42 AM |
|
Hey guys, I have some Nvidia P104-100 cards running with Claymore 15 and since yesterday they are not working anymore.
Problem is about DAG size the GPU has 4GB I thought I could mine until December instead suddenly no more mining with error: CUDA error - cannot allocate big buffer for DAG.
Is there a way to try to squeeze them more?
Use PhoenixMiner. |
|
|
|
ermis1975
Member
Offline
Activity: 198
Merit: 10
|
|
September 20, 2020, 09:17:15 AM |
|
I mine ETH with claymore 15. What else can I mine with dualminer? Is it profitable?
|
|
|
|
|
DrG
Legendary
Offline
Activity: 2086
Merit: 1035
|
|
September 20, 2020, 04:36:24 PM |
|
I mine ETH with claymore 15. What else can I mine with dualminer? Is it profitable?
1/2 the coins that could be mined with dual mining are now mined by ASICs which no GPU can compete with. The other 1/2 are more are less coins that were created to just exist. Occasionally some will spike in price for a couple days but nothing meaningful. Do your own research and see if there is a coin you thing has a purpose or value that cannot be solved by another coin. If you find one dual mine it with hope it might go up later. For now nothing is really worth dual mining unless you have free power/cooling and are willing to stress your card more than it has to. |
|
|
|
|
NCarter84
Jr. Member
Offline
Activity: 195
Merit: 4
|
|
September 23, 2020, 01:03:59 AM |
|
What is the dev fee for navi cards? 1%?
|
|
|
|
|
xandry
Staff
Legendary
Offline
Activity: 3444
Merit: 4037
Crypto Swap Exchange
|
|
September 23, 2020, 05:08:15 AM |
|
Use PhoenixMiner.
Or he can switch to Linux. What is the dev fee for navi cards? 1%?
Yep. AMD navi cards have more than 3 Gb memory so the dev fee is 1 %. |
|
|
|
VladimirZ
Newbie
Offline
Activity: 3
Merit: 0
|
|
September 23, 2020, 06:00:44 AM |
|
Hey guys, I have some Nvidia P104-100 cards running with Claymore 15 and since yesterday they are not working anymore.
Problem is about DAG size the GPU has 4GB I thought I could mine until December instead suddenly no more mining with error: CUDA error - cannot allocate big buffer for DAG.
Is there a way to try to squeeze them more?
Please, look at https://bitcointalk.org/index.php?topic=5113847.0I did it with my Manli p104-100. |
|
|
|
|
ballhair85
Newbie
Offline
Activity: 17
Merit: 0
|
|
September 23, 2020, 07:30:51 AM |
|
author="Bitcoin Forum" A reply of yours, quoted below, was deleted by a Bitcoin Forum moderator. Posts are most frequently deleted because they are off-topic, though they can also be deleted for other reasons. In the future, please avoid posting things that need to be deleted. Hey guys, I have some Nvidia P104-100 cards running with Claymore 15 and since yesterday they are not working anymore.
Problem is about DAG size the GPU has 4GB I thought I could mine until December instead suddenly no more mining with error: CUDA error - cannot allocate big buffer for DAG.
Is there a way to try to squeeze them more?
Use PhoenixMiner. I jumped across to PhoenixMiner when Claymores stopped working on my Rx570's. Dev fee of 0.65% and only took a hit of 2MH/s total... Regretting not switching sooner. I did have trouble though initially getting it to work. Had a 1060 6GB mining away diligently with Claymore's and using nbminer to pinch some RVN with the 570's. Phoenix has everything back on ETH again. Claymores was amazing though, still the only Dual miner worth talking about. Regards, Ballhair ---------------------- Apologies if the link created some issues. I felt like my reply was relevant and valid. |
|
|
|
|
|
john1010
|
|
September 23, 2020, 08:48:26 AM |
|
Hi guys I just want to ask if this latest version of claymore will support RX 570 8GB? I flashed my sapphire nitro+ with original mod because someone in this forum shows me his result >>> gpu 0 polor 580 8gb gpu 1 nitro+ 580 8gb gpu 2 polor 580 8gb gpu 3 polor 570 8gb gpu 4 polor 570 8gb no mod bios  |
|
|
|
|
|
percy_tc
|
|
September 23, 2020, 09:18:35 PM |
|
33MH @ 100W in not so great imo. I have 29,7MH @ 76W.
|
|
|
|
|
ermis1975
Member
Offline
Activity: 198
Merit: 10
|
|
September 23, 2020, 09:35:53 PM |
|
33MH @ 100W in not so great imo. I have 29,7MH @ 76W.
With 580 or 570 ? Its very good. |
|
|
|
|
|
deadsix
|
|
September 24, 2020, 07:22:38 AM |
|
33MH @ 100W in not so great imo. I have 29,7MH @ 76W.
Not at the wall. SW readings mean nothing. You gotta measure at the wall. |
|
|
|
|
john1010
|
|
September 25, 2020, 06:19:19 AM |
|
Hi I;m using the latest version of claymore now with my sapphire nitro plus rx 570 8gb not moded card, but I hust saw this red indication on my miner, what was that mean? here's the image:  |
|
|
|
|
Echo8002
Newbie
Offline
Activity: 18
Merit: 0
|
|
September 25, 2020, 10:19:00 AM |
|
Hi I;m using the latest version of claymore now with my sapphire nitro plus rx 570 8gb not moded card, but I hust saw this red indication on my miner, what was that mean? here's the image: https://i.postimg.cc/6qg45Jrf/claymore.pngWrite -driver uninstall in the .bat file, start it and when it shows the driver successfully uninstalled , delete the command and start the miner again. |
|
|
|
|
|
