[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[delbarbour]

Hello everyone,

Ive been stuck at OpenCL initializing for quite sometime now all other OS are working on the same rig but SMOS is always getting stuck at OpenCL initializing does anyone know how to solve this issue

how many GPU are using ? and what model ?

if DAG loading is making the opencl or miner hang u should try serial dag loading

[Proparser]

Add Lyra2rev2 miner for GTX cards. plz! thx!

[shoaib2k2]

Using 8 RX 580 8gb Cards on asrockh110 pro btc 1200watt and 850 Watt PSU

[Mr_zero]

Hey guys,

For some reason i can not oc my rx 570 cards. I tried in the oc settings and claymore settings no luck. In oc settings gives me BUG: soft lock up and miner restarts after 30 seconds no matter what. And in claymore settings i put my oc values: -cclock 1175 -mclock 2000, nothing happens, miner starts to mine but GPUs not overclocked.

Any ideas? Thanks

Has anyone been able to help with this?

I'm also getting an:
NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s!

Any ideas on what this is please?

I just updated the SMOS software - no oc, or anything else

[shoaib2k2]

Hello everyone,

Ive been stuck at OpenCL initializing for quite sometime now all other OS are working on the same rig but SMOS is always getting stuck at OpenCL initializing does anyone know how to solve this issue

how many GPU are using ? and what model ?

if DAG loading is making the opencl or miner hang u should try serial dag loading

How should i do the serial dag loading

[jnickel]

Just started using Simple Miner. I'm really liking it so far.

A few questions/suggestions:

- is it ok to change the hostname/hosts file on each rig?
- anyway to provide alerts when the rig is down (not responding, low hashrate card crash etc)?
- can you put the current coin, hashrate and approximate profit per day in the web interface?

Thanks!

Jim

[crazyivan]

When I plug in flashed USB, I get a message about hardware detected which will change firmware etc on my machine and it offers me to choose another boot option.

What to do?

What motherboard do you have? I'm guessing there's a setting somewhere in the BIOS for the motherboard to disable warnings. Look for something like that in the boot menu, or security menu.

Thx, will definitely try that.

[davidsuswanto]

please add ccminer 2.2.3

[willi9974]

feature request

one of my cards catch no share.
Total Shares: 350(50+42+58+45+55+47+0+53)

If it possible to get this Info on the WebSite per Miner, or the other side from that, to see all incorrect share per card?

[Whitehawk29]

The is no neoscrypt miner on simplemining 

[lablefromu]

guys can you tell me how to fix this error:

"failed to set new fan speed check if miner has root access"


I have 3 x rx 580 8gb nitro plus

Remove -tt from claymore miner ... at least that was my case you can have target temp set at the OC settings in SMOS

ty that solved this problem but i have another one now

pls check this video, thats my problem

pcie bus error

https://www.youtube.com/watch?v=rGxZ3W9eLfo

[jb7032]

The is no neoscrypt miner on simplemining 

ccminer-tpruvot-v2.1 does neoscrypt.

[Miningmax]

I have some problems
I want to use cc miner tpruvrot for skunkhash
but everytime i get an error root/xminer.sh: line 58 illegal instruction $Miner_Path $Miner_Options

Configuration Simplemining Os
-a skunk -o stratum+tcp://pool.friends-master.net:8433 -u walletadress -p c=ALTCOM

How can I get it solved?

[delbarbour]

Hello everyone,

Ive been stuck at OpenCL initializing for quite sometime now all other OS are working on the same rig but SMOS is always getting stuck at OpenCL initializing does anyone know how to solve this issue

how many GPU are using ? and what model ?

if DAG loading is making the opencl or miner hang u should try serial dag loading

How should i do the serial dag loading

simple Use -gser   this setting can improve stability on multi-GPU systems if miner hangs during startup. It serializes GPUs initalization routines. Use "-gser 1" to serailize some of routines and "-gser 2" to serialize all routines.
   Using values higher than 2 allows you also to set custom delay between DAG generation on GPUs, for example, "-gser 5" means same as "-gser 2" and also adds 3sec delay between DAG generation (can be useful for buggy drivers and/or weak PSU).
   Default value is "0" (no serialization, fast initialization).

[delbarbour]

Hello,

I have 16 miners working right now on SMOS. I have 8 miners connected to an unmanaged TPLink TL-SG1016 switch. I have the other 8 miners connected similarly to a separate switch. These two unmanaged switches are connected to my router which has DHCP enabled. Router is connected to the internet.

I'm having an issue that when one of my SMOS miners freezes, it takes down the entire unmanaged switch it is connected to. i.e. all the other miners on that switch go offline. The minute I turn off and reboot the frozen miner manually (holding the power switch for 5s) all the other miners go back online and resume mining. I'm not sure if the frozen miner is flooding the switch with packets or something, I was wondering if anyone else ran into this issue.

I am not sure what is freezing my miner as well. I find that after a couple of resets, the freezing will go away but then another miner on the network will start to do the same thing a few days later. This happens on either switch network.

Any help would be appreciated.

Thanks,

its Mostly Because a bug in ubuntu 16.04 with Skylake CPU causing PCIe Flooding errors, what board and cpu u use ?

try adding via ssh pci=noaer to grub

also Never Enable boot from LAN in BIOS for NIC for some reason it flood the switch and disabled network connectivty on LAN wifi still works tho

[delbarbour]

Asrock H110 Pro Btc +

Getting kernel panic on multiple rigs.

I get this error

kernel panic not syncing timeout not all cpus entered broadcast exception handler

I'm using Celeron LGA 1151 G3930

Also I can confirm that rigs lose connection with simplemining

try adding via ssh pci=noaer to grub

also Never Enable boot from LAN in BIOS for NIC its flood the switch and disabled network connectivity

it solved my similar issue

[jerendon74]

Hello everyone,

Ive been stuck at OpenCL initializing for quite sometime now all other OS are working on the same rig but SMOS is always getting stuck at OpenCL initializing does anyone know how to solve this issue

how many GPU are using ? and what model ?

if DAG loading is making the opencl or miner hang u should try serial dag loading

How should i do the serial dag loading

simple Use -gser   this setting can improve stability on multi-GPU systems if miner hangs during startup. It serializes GPUs initalization routines. Use "-gser 1" to serailize some of routines and "-gser 2" to serialize all routines.
   Using values higher than 2 allows you also to set custom delay between DAG generation on GPUs, for example, "-gser 5" means same as "-gser 2" and also adds 3sec delay between DAG generation (can be useful for buggy drivers and/or weak PSU).
   Default value is "0" (no serialization, fast initialization).

Don't mean to butt in on a conversation you two are having, but I was having the same issue with the RX Os WITHOUT dagfix. Flashed a brand new USB with RX os WITH Dagfix and its working smoothly now. Hope this helps.

[rothcom65]

Hi ,

I am new to the hobby. Might I ask:

1/ Any wifi adaptor/range extender with WAN/LAN that supports SM OS?

2/ I am gonna go out of state and be operating my 2 rigs at hometown for the first couple months, Will SM OS be an ideal choice for that.

Thank you very much and Happy Holiday,

Rothco

[Anr2889]

I seem to randomly get the error "# connection closed by server r:0" while im connected to the miner.

Things seem to go well for about an hour and then I get that error and I have to reboot the miner program. Any ideas?

This is the line im using to start:
--server zhash.pro --port 3057 --user znk4Hw9K8HUoEgpzaX8vRDD1pvcKWqgGzSX.$rigName --pass x

Miner: dstm-v0.5.6

https://imgur.com/a/ZSc2I

[VyprBTC]

Able to add Alexis78 to ccminer on this at all? Thanks