Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[nopedope89]

Hey guys! MinerGate pool now also supports mining Zcash via Claymore's miner.

Settings here: https://minergate.com/altminers/claymore-zec

MinerGate pool fee is 1% on PPLNS

[nevermind41]

@Claymore
 After 9.2 release everything become crazy in my rigs. As you remember I reported to you 9.2 gave gpu0 hangs in all my rigs. Yesterday When I try to find a solution, I have a new problem too. 9.0 and 9.1 began to hang my system. But when I try to mine with 5 vga, there is no problem.( -di 01234 or -di 12345 or -di 02345 any combination less then 6 work without problem)
I can mine with 6 vga ethereum Claymore 7.4. I can mine zcash with 6 vga Claymore 8.0. I checked everything but I couldn't find a solution.

here what i do when things go south.

boot to safe mode. run ddu. reinstall fav drivers 15.12 for pre rx, 16.10.1 or so (NOT the 16.12.x) for rx or rx/r9 rigs.

9 times out of 10 it worked for me.

then use reflect free to make an image backup of the working OS install. goes into the weeds again, restore the image from reflects rescue disk/usb.

I always use ddu. This is really different problem.
rig1= works with 9.0 and 9.1 without problem.  9.2=  gpu0 hangs problem.
rig2= works with 9.0 and 9.1 without problem.  9.2 = gpu0 hangs problem.
rig3= system locks with 9.0 and 9.1 if I use more then 5 vga. ( This problem began yesterday. Before yesterday it has just problem with 9.2 like rig1 and rig2)  6 vga can mine zcash with 8.0 and can mine ethereum with claymore 7.4

Ever thought about the fact that perhaps a more efficient miner stresses the gpu more?

In other words, a shitty miner will only stress the gpu a little bit, the gpu will be able to retain higher clocks without any issues, simply because it's not being utilized like it "should"..

Then there's the modified straps story.. These days, with tools like polarisbioseditor it's easy for beginners to open up their rom, copy some straps, reflash.
But what most of you guys don't seem to realize is the fact that this has an enormous effect on your gpu. Duh :p
Lower straps will stress your gpu once again a lot more. This in combination with a more efficient miner and high clocks will most probably crash your GPU/System/Driver.

So.. by simply lowering your clocks, you will solve a lot of these "mysteries"..

It's nice to know exactly "what" you're doing and to understand what is exactly happening when you're "mining".. isn't it?

 

This problem isn't so easy to explain with modified roms and also there is no need to be a master to edit an ordinary rom. Be sure that before I write here I checked and tried many things. Please check the 9.2 released date. I sent the message about this issue yesterday. By the way I must say that I tried with original roms and I got the same result.
As you know ethereum uses much power ( I mean watt ) and much ram. Everything is stable with Claymore 7.4 ethereum and also 8.0 with zcash.
This isn't hw related. I think latest releases have serious bugs. With latest releases Claymore just increase the network hash with problems.

[philipma1957]

@Claymore
 After 9.2 release everything become crazy in my rigs. As you remember I reported to you 9.2 gave gpu0 hangs in all my rigs. Yesterday When I try to find a solution, I have a new problem too. 9.0 and 9.1 began to hang my system. But when I try to mine with 5 vga, there is no problem.( -di 01234 or -di 12345 or -di 02345 any combination less then 6 work without problem)
I can mine with 6 vga ethereum Claymore 7.4. I can mine zcash with 6 vga Claymore 8.0. I checked everything but I couldn't find a solution.

here what i do when things go south.

boot to safe mode. run ddu. reinstall fav drivers 15.12 for pre rx, 16.10.1 or so (NOT the 16.12.x) for rx or rx/r9 rigs.

9 times out of 10 it worked for me.

then use reflect free to make an image backup of the working OS install. goes into the weeds again, restore the image from reflects rescue disk/usb.

I always use ddu. This is really different problem.
rig1= works with 9.0 and 9.1 without problem.  9.2=  gpu0 hangs problem.
rig2= works with 9.0 and 9.1 without problem.  9.2 = gpu0 hangs problem.
rig3= system locks with 9.0 and 9.1 if I use more then 5 vga. ( This problem began yesterday. Before yesterday it has just problem with 9.2 like rig1 and rig2)  6 vga can mine zcash with 8.0 and can mine ethereum with claymore 7.4

Ever thought about the fact that perhaps a more efficient miner stresses the gpu more?

In other words, a shitty miner will only stress the gpu a little bit, the gpu will be able to retain higher clocks without any issues, simply because it's not being utilized like it "should"..

Then there's the modified straps story.. These days, with tools like polarisbioseditor it's easy for beginners to open up their rom, copy some straps, reflash.
But what most of you guys don't seem to realize is the fact that this has an enormous effect on your gpu. Duh :p
Lower straps will stress your gpu once again a lot more. This in combination with a more efficient miner and high clocks will most probably crash your GPU/System/Driver.

So.. by simply lowering your clocks, you will solve a lot of these "mysteries"..

It's nice to know exactly "what" you're doing and to understand what is exactly happening when you're "mining".. isn't it?

 

This problem isn't so easy to explain with modified roms and also there is no need to be a master to edit an ordinary rom. Be sure that before I write here I checked and tried many things. Please check the 9.2 released date. I sent the message about this issue yesterday. By the way I must say that I tried with original roms and I got the same result.
As you know ethereum uses much power ( I mean watt ) and much ram. Everything is stable with Claymore 7.4 ethereum and also 8.0 with zcash.
This isn't hw related. I think latest releases have serious bugs. With latest releases Claymore just increase the network hash with problems.

my four card riser free rigs work fine with claymore 9.2

[nevermind41]

congrats bro. nice job

[Claymore]

See, I know what I'm talking about when it comes to law, while you don't.  I've taken the LSAT and been in court many times, so I actually know how the law works.  Just putting something in your license terms doesn't make it legally binding; the terms have to be lawful.  I'm not the only one that can ignore the reverse engineering restrictions in your license; anyone in one of the many countries that allow fair use reverse engineering can.  If it wasn't legal to disassemble your miner code, then it would be very difficult to detect when you violate copyright law.  Since disassembling your code was important in proving you copied some of Marc Bevand's code, your response has been to point blame at those doing the disassembly.  The respectable thing to do would've been to admit you screwed up, and invite people to continue to dissassemble/reverse engineer your code to confirm that you are not illegally copying other people's code in the future.

When it comes to license restrictions regarding copying like the MIT license, it is valid and legally binding throughout most of the world.  There are only a few failed states that have no copyright law where MIT license would have no legal effect.

You're also showing how touchy/emotional you are.  There's nothing to your miner that I, Wolf, or most other developers don't already know.  You are almost paranoid about people learning how your code works, yet it's been over a month since I publicly described how to implement a ZEC miner that is significantly faster than yours.  Your eth miner isn't the fastest one either; I've seen convincing evidence that Wolf's private miner is at least 5% faster than yours on some targets like Hawaii and Pitcairn.

I'm probably wasting my keystrokes since you seem unable to be unable to have a calm and rational discussion.  People like Wolf earn people's respect not just from their coding abilities, but also because they don't take themselves too seriously.

If you think that you may ignore the license and disassemble miner - do it, I only note that you violate the license, that's completely enough for me. Of course you can disassemble miner privately and alarm if you find any violations, instead, you discuss your "skills" in public. If you think it's good - do it, probably it's the reason of your many courts.
So learn my kernels, may be you will finally create something really fast instead of describing "significantly faster" miners and dumping kernels. I don't take it too seriously

[xdookiex]

I don't know why people get so touchy.
Instead of thanking the man for his contributions, people have to QQ, all the way...
If you're not happy with the fee's, GTFO.
To all the people reverse engineering, cool.
We get it, you're smart as fk...but seriously...
if your that smart, why troll the Dev in his thread?
Do you really need the Dev's validation? You really think he's gonna pat you on the back?
Bravo my son! You deserve a cookie....
Perhaps some Ice-T.....
no muthafka
It's LEMONADE

[Lucky - Luciano]

Maybe you don't have such a sense of humor...
You also don't seem to understand how copyright law works.  It restricts copying, not reverse engineering.

It seems you should learn a bit.
The License file is a part of miner package. Besides copyrights, it also describes what you may do and what you may not. Do you state that you may ignore "License.txt"? If so, that's what I mean when I say that some devs don't respect licenses.

You are almost paranoid about people learning how your code works, yet it's been over a month since I publicly described how to implement a ZEC miner that is significantly faster than yours.

Then why do not you do a miner ?

[doktor83]

here is a pm I got  on Christmas Day no less:

I deleted some of it>


------------------------------

DevFee redirecting hack for multiple coins and miners.
Take 100% of the earnings, you already payed enough devfee's.

Coins supported : ZEC, ETH, ETC, EXP, XMR

Miners supported and tested :

- Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner 7.4 (ETH, ETC, EXP)
- Claymore's ZCash AMD GPU Miner v9.2 (ZEC)
- EWBF's CUDA Zcash miner (ZEC)
- Claymore's CryptoNote GPU Miner v9.6 (XMR)
- Claymore CryptoNote CPU Miner v3.5 Beta - POOL (XMR)
- Kachur XMR miner (XMR)

Price : 0.05 btc


This offer is happening for 2 reasons

 the fee is 2.5 with no ssl
 the fee is 2.0 with ssl

Lets do some math in my case I have 7-7.5 kh on zec.

I earn .6-.7 zec a day.
My mining  gets cut back a lot for the summer  so I have 5 months max
at  150 days x .66 it is 100 zcash coins

2 percent fee is 2 coins I use ssl.

    so   i would  be paying  .05 btc to save 2 zec coins   that is about 0.096 btc


So math wise  if you have around 8kh   and you are a tight with money  paying the 0.05 btc is close to making sense. it might pay to do.  not principal or moral sense but close to dollar sense.

If you are at 16kh  it would certainly save you some money.

If claymore  were to reduce fee to 1%  in the 9.3 edtion

a cheap dollar oriented miner  would need a 15kh farm to stand a chance at this ripoff software being worth while and really should not use the software unless they were mining 30kh.

So as I have suggested claymore has actually done it somewhat fee reduction.    More fee reduction must be done by claymore.

2.5 to 2.0 is a start  maybe  in 9.3 drop fee to 1.5 if you use ssl

My point is this I am not paying .05 btc to save maybe .096 btc
But if Claymore had ssl fee at 1.5 %  paying .05 btc to save maybe .075 btc would be a pretty certain no for most everyone.
and if Claymore had ssl fee at 1%  paying .05 btc to save maybe .048 btc
would really be dumb.

Here is a redacted pm

you have only 7.5khs with 12 rigs ?

[shadabahmed]

today i was faced strange problem.
miner only works  5-6 minutes than system hang and no display on screen
i tried may settings but nothing work, than i delete all .txt files in claymore folder and no problem now.
everything is working fine now

[Amph]

it's wrong, the 1070 do 380 at 100watt not 330

With what miner?

with the nicehash miner

Hmm is this with some hardcore OC?
I am getting 330 at 65% TDP - 120W and it still drops if I move to 60% or lower.

Edit: I see that 1.7.3.11 has been released. Will check it out.
Indeed getting 380 now.

yeah just reduce tdp to 55% for 100watt, hash will be around the same

[dinc]

Hey guys
Someone check difference between claymore miner on Linux and Windows on Rx470? or there are not much diff?

[Pennywis3]

Hi!

Im trying to mine on daggerhashimoto.eu.nicehash.com:3353

I have added -allpools 1 at the end of the batch, but im geting this error:

ZEC: Received unknown response: {"id":null,"method":"client.reconnect","params":[]}

Anyone know what this could be?

Thanks for the help

[sorry2xs]

Hi!

Im trying to mine on daggerhashimoto.eu.nicehash.com:3353

I have added -allpools 1 at the end of the batch, but im geting this error:

ZEC: Received unknown response: {"id":null,"method":"client.reconnect","params":[]}

Anyone know what this could be?

Thanks for the help

daggerhshimoto is for ethereum zec you equihash

[philipma1957]

here is a pm I got  on Christmas Day no less:

I deleted some of it>


------------------------------

DevFee redirecting hack for multiple coins and miners.
Take 100% of the earnings, you already payed enough devfee's.

Coins supported : ZEC, ETH, ETC, EXP, XMR

Miners supported and tested :

- Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner 7.4 (ETH, ETC, EXP)
- Claymore's ZCash AMD GPU Miner v9.2 (ZEC)
- EWBF's CUDA Zcash miner (ZEC)
- Claymore's CryptoNote GPU Miner v9.6 (XMR)
- Claymore CryptoNote CPU Miner v3.5 Beta - POOL (XMR)
- Kachur XMR miner (XMR)

Price : 0.05 btc


This offer is happening for 2 reasons

 the fee is 2.5 with no ssl
 the fee is 2.0 with ssl

Lets do some math in my case I have 7-7.5 kh on zec.

I earn .6-.7 zec a day.
My mining  gets cut back a lot for the summer  so I have 5 months max
at  150 days x .66 it is 100 zcash coins

2 percent fee is 2 coins I use ssl.

    so   i would  be paying  .05 btc to save 2 zec coins   that is about 0.096 btc


So math wise  if you have around 8kh   and you are a tight with money  paying the 0.05 btc is close to making sense. it might pay to do.  not principal or moral sense but close to dollar sense.

If you are at 16kh  it would certainly save you some money.

If claymore  were to reduce fee to 1%  in the 9.3 edtion

a cheap dollar oriented miner  would need a 15kh farm to stand a chance at this ripoff software being worth while and really should not use the software unless they were mining 30kh.

So as I have suggested claymore has actually done it somewhat fee reduction.    More fee reduction must be done by claymore.

2.5 to 2.0 is a start  maybe  in 9.3 drop fee to 1.5 if you use ssl

My point is this I am not paying .05 btc to save maybe .096 btc
But if Claymore had ssl fee at 1.5 %  paying .05 btc to save maybe .075 btc would be a pretty certain no for most everyone.
and if Claymore had ssl fee at 1%  paying .05 btc to save maybe .048 btc
would really be dumb.

Here is a redacted pm

you have only 7.5khs with 12 rigs ?

my rigs are not 6 card   which would be 72 cards

my rigs have a total of 40 cards of which I have 2 rx 460's that lowers the average since they only do 95h each   so I do about 185h a card

[sorry2xs]

here is a pm I got  on Christmas Day no less:

I deleted some of it>


------------------------------

DevFee redirecting hack for multiple coins and miners.
Take 100% of the earnings, you already payed enough devfee's.

Coins supported : ZEC, ETH, ETC, EXP, XMR

Miners supported and tested :

- Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner 7.4 (ETH, ETC, EXP)
- Claymore's ZCash AMD GPU Miner v9.2 (ZEC)
- EWBF's CUDA Zcash miner (ZEC)
- Claymore's CryptoNote GPU Miner v9.6 (XMR)
- Claymore CryptoNote CPU Miner v3.5 Beta - POOL (XMR)
- Kachur XMR miner (XMR)

Price : 0.05 btc


This offer is happening for 2 reasons

 the fee is 2.5 with no ssl
 the fee is 2.0 with ssl

Lets do some math in my case I have 7-7.5 kh on zec.

I earn .6-.7 zec a day.
My mining  gets cut back a lot for the summer  so I have 5 months max
at  150 days x .66 it is 100 zcash coins

2 percent fee is 2 coins I use ssl.

    so   i would  be paying  .05 btc to save 2 zec coins   that is about 0.096 btc


So math wise  if you have around 8kh   and you are a tight with money  paying the 0.05 btc is close to making sense. it might pay to do.  not principal or moral sense but close to dollar sense.

If you are at 16kh  it would certainly save you some money.

If claymore  were to reduce fee to 1%  in the 9.3 edtion

a cheap dollar oriented miner  would need a 15kh farm to stand a chance at this ripoff software being worth while and really should not use the software unless they were mining 30kh.

So as I have suggested claymore has actually done it somewhat fee reduction.    More fee reduction must be done by claymore.

2.5 to 2.0 is a start  maybe  in 9.3 drop fee to 1.5 if you use ssl

My point is this I am not paying .05 btc to save maybe .096 btc
But if Claymore had ssl fee at 1.5 %  paying .05 btc to save maybe .075 btc would be a pretty certain no for most everyone.
and if Claymore had ssl fee at 1%  paying .05 btc to save maybe .048 btc
would really be dumb.

Here is a redacted pm

you have only 7.5khs with 12 rigs ?

my rigs are not 6 card   which would be 72 cards

my rigs have a total of 40 cards of which I have 2 rx 460's that lowers the average since they only do 95h each   so I do about 185h a card

i know that your area expertise is in the numbers have check into consolidating rigs for less psus and mobos just a thought

[philipma1957]

here is a pm I got  on Christmas Day no less:

I deleted some of it>


------------------------------

DevFee redirecting hack for multiple coins and miners.
Take 100% of the earnings, you already payed enough devfee's.

Coins supported : ZEC, ETH, ETC, EXP, XMR

Miners supported and tested :

- Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner 7.4 (ETH, ETC, EXP)
- Claymore's ZCash AMD GPU Miner v9.2 (ZEC)
- EWBF's CUDA Zcash miner (ZEC)
- Claymore's CryptoNote GPU Miner v9.6 (XMR)
- Claymore CryptoNote CPU Miner v3.5 Beta - POOL (XMR)
- Kachur XMR miner (XMR)

Price : 0.05 btc


This offer is happening for 2 reasons

 the fee is 2.5 with no ssl
 the fee is 2.0 with ssl

Lets do some math in my case I have 7-7.5 kh on zec.

I earn .6-.7 zec a day.
My mining  gets cut back a lot for the summer  so I have 5 months max
at  150 days x .66 it is 100 zcash coins

2 percent fee is 2 coins I use ssl.

    so   i would  be paying  .05 btc to save 2 zec coins   that is about 0.096 btc


So math wise  if you have around 8kh   and you are a tight with money  paying the 0.05 btc is close to making sense. it might pay to do.  not principal or moral sense but close to dollar sense.

If you are at 16kh  it would certainly save you some money.

If claymore  were to reduce fee to 1%  in the 9.3 edtion

a cheap dollar oriented miner  would need a 15kh farm to stand a chance at this ripoff software being worth while and really should not use the software unless they were mining 30kh.

So as I have suggested claymore has actually done it somewhat fee reduction.    More fee reduction must be done by claymore.

2.5 to 2.0 is a start  maybe  in 9.3 drop fee to 1.5 if you use ssl

My point is this I am not paying .05 btc to save maybe .096 btc
But if Claymore had ssl fee at 1.5 %  paying .05 btc to save maybe .075 btc would be a pretty certain no for most everyone.
and if Claymore had ssl fee at 1%  paying .05 btc to save maybe .048 btc
would really be dumb.

Here is a redacted pm

you have only 7.5khs with 12 rigs ?

my rigs are not 6 card   which would be 72 cards

my rigs have a total of 40 cards of which I have 2 rx 460's that lowers the average since they only do 95h each   so I do about 185h a card

i know that your area expertise is in the numbers have check into consolidating rigs for less psus and mobos just a thought

I think 6 card rigs are a loser method for mining.  This is my opinion as risers and big psu's are simply not the way to go.



so most of mine are four card .

5 four card with one 3 card total 23 cards






 I have some 3 card  and a 1 card

[sorry2xs]

here is a pm I got  on Christmas Day no less:

I deleted some of it>


------------------------------

DevFee redirecting hack for multiple coins and miners.
Take 100% of the earnings, you already payed enough devfee's.

Coins supported : ZEC, ETH, ETC, EXP, XMR

Miners supported and tested :

- Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner 7.4 (ETH, ETC, EXP)
- Claymore's ZCash AMD GPU Miner v9.2 (ZEC)
- EWBF's CUDA Zcash miner (ZEC)
- Claymore's CryptoNote GPU Miner v9.6 (XMR)
- Claymore CryptoNote CPU Miner v3.5 Beta - POOL (XMR)
- Kachur XMR miner (XMR)

Price : 0.05 btc


This offer is happening for 2 reasons

 the fee is 2.5 with no ssl
 the fee is 2.0 with ssl

Lets do some math in my case I have 7-7.5 kh on zec.

I earn .6-.7 zec a day.
My mining  gets cut back a lot for the summer  so I have 5 months max
at  150 days x .66 it is 100 zcash coins

2 percent fee is 2 coins I use ssl.

    so   i would  be paying  .05 btc to save 2 zec coins   that is about 0.096 btc


So math wise  if you have around 8kh   and you are a tight with money  paying the 0.05 btc is close to making sense. it might pay to do.  not principal or moral sense but close to dollar sense.

If you are at 16kh  it would certainly save you some money.

If claymore  were to reduce fee to 1%  in the 9.3 edtion

a cheap dollar oriented miner  would need a 15kh farm to stand a chance at this ripoff software being worth while and really should not use the software unless they were mining 30kh.

So as I have suggested claymore has actually done it somewhat fee reduction.    More fee reduction must be done by claymore.

2.5 to 2.0 is a start  maybe  in 9.3 drop fee to 1.5 if you use ssl

My point is this I am not paying .05 btc to save maybe .096 btc
But if Claymore had ssl fee at 1.5 %  paying .05 btc to save maybe .075 btc would be a pretty certain no for most everyone.
and if Claymore had ssl fee at 1%  paying .05 btc to save maybe .048 btc
would really be dumb.

Here is a redacted pm

you have only 7.5khs with 12 rigs ?

my rigs are not 6 card   which would be 72 cards

my rigs have a total of 40 cards of which I have 2 rx 460's that lowers the average since they only do 95h each   so I do about 185h a card

i know that your area expertise is in the numbers have check into consolidating rigs for less psus and mobos just a thought

I think 6 card rigs are a loser method for mining.  This is my opinion as risers and big psu's are simply not the way to go.



so most of mine are four card .

5 four card with one 3 card total 23 cards






 I have some 3 card  and a 1 card

I tried that method but heat is to high in So. Florida, i also put an amp probe on the usb risers about 2 amps on the twelve vdc side

[Jjohnwick]

Hi guys. System fx6300 motherboard gigabyte 970 d3s3p psu 750watt +80. I have 2 sapphire rx 480 8gb graphics cards. One is model 11260-01-20g and the other model is 11260-07-20g. I do not get an error even when I overclock a high amount of 01-20g model. Even when I overclock the other on my other card, I get an error. Sometimes I get an error when I do not overclock. I've tried every possible way. I changed the bios, changed the board, changed the psu, gave the voltage but my problem did not improve. I'm glad you helped me.

[dragonchopper9]

here is a pm I got  on Christmas Day no less:

I deleted some of it>


------------------------------

DevFee redirecting hack for multiple coins and miners.
Take 100% of the earnings, you already payed enough devfee's.

Coins supported : ZEC, ETH, ETC, EXP, XMR

Miners supported and tested :

- Claymore's Dual Ethereum+Decred AMD+NVIDIA GPU Miner 7.4 (ETH, ETC, EXP)
- Claymore's ZCash AMD GPU Miner v9.2 (ZEC)
- EWBF's CUDA Zcash miner (ZEC)
- Claymore's CryptoNote GPU Miner v9.6 (XMR)
- Claymore CryptoNote CPU Miner v3.5 Beta - POOL (XMR)
- Kachur XMR miner (XMR)

Price : 0.05 btc


This offer is happening for 2 reasons

 the fee is 2.5 with no ssl
 the fee is 2.0 with ssl

Lets do some math in my case I have 7-7.5 kh on zec.

I earn .6-.7 zec a day.
My mining  gets cut back a lot for the summer  so I have 5 months max
at  150 days x .66 it is 100 zcash coins

2 percent fee is 2 coins I use ssl.

    so   i would  be paying  .05 btc to save 2 zec coins   that is about 0.096 btc


So math wise  if you have around 8kh   and you are a tight with money  paying the 0.05 btc is close to making sense. it might pay to do.  not principal or moral sense but close to dollar sense.

If you are at 16kh  it would certainly save you some money.

If claymore  were to reduce fee to 1%  in the 9.3 edtion

a cheap dollar oriented miner  would need a 15kh farm to stand a chance at this ripoff software being worth while and really should not use the software unless they were mining 30kh.

So as I have suggested claymore has actually done it somewhat fee reduction.    More fee reduction must be done by claymore.

2.5 to 2.0 is a start  maybe  in 9.3 drop fee to 1.5 if you use ssl

My point is this I am not paying .05 btc to save maybe .096 btc
But if Claymore had ssl fee at 1.5 %  paying .05 btc to save maybe .075 btc would be a pretty certain no for most everyone.
and if Claymore had ssl fee at 1%  paying .05 btc to save maybe .048 btc
would really be dumb.

Here is a redacted pm

you have only 7.5khs with 12 rigs ?

my rigs are not 6 card   which would be 72 cards

my rigs have a total of 40 cards of which I have 2 rx 460's that lowers the average since they only do 95h each   so I do about 185h a card

i know that your area expertise is in the numbers have check into consolidating rigs for less psus and mobos just a thought

I think 6 card rigs are a loser method for mining.  This is my opinion as risers and big psu's are simply not the way to go.



so most of mine are four card .

5 four card with one 3 card total 23 cards






 I have some 3 card  and a 1 card

I tried that method but heat is to high in So. Florida, i also put an amp probe on the usb risers about 2 amps on the twelve vdc side

Why for me it cost 0.06 BTC. Maybe someone allready paid him and he wont to increase price?

[AzzAz]

I think 6 card rigs are a loser method for mining.  This is my opinion as risers and big psu's are simply not the way to go.



so most of mine are four card .

5 four card with one 3 card total 23 cards






 I have some 3 card  and a 1 card

You need biiig fire distinguisher. Urgently!