IOTUSA
|
|
January 19, 2017, 09:49:49 PM |
|
630 H/s in zec mining with 2 r9 280 x Claymore 11.1 bullshit - Thanksss Claymore Team Good Job It's amazing that it's always the noobs with 20 random comments that manage to get the best results.. what a coincidence
|
|
|
|
kdepfyffer
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 19, 2017, 10:14:14 PM |
|
Hey Guys,
I have an r7 370 that is not recognized anymore. The fans are spinning but Windows/Linux cannot see it
Since it has never happened to me before am i looking at a burnt card?
I have a card that keeps dropping from windows 7 - well stops being recognized, yours sounds worse than that but I simply plug it into another slot and it shows up again after a second reboot. I have a feeling the card is about to die but I'll keep switching it until it does. just a thought
|
|
|
|
armazingerz
Newbie
Offline
Activity: 43
Merit: 0
|
|
January 19, 2017, 11:22:25 PM |
|
Hi,
I have a couple rigs connected and my internet connection becomes very slow, any ideas? What can I do? What if I change difficulty or something?
Thanx a lot
|
|
|
|
thedreamer
Legendary
Offline
Activity: 1694
Merit: 1002
Go Big or Go Home.....
|
|
January 20, 2017, 12:58:03 AM |
|
630 H/s in zec mining with 2 r9 280 x Claymore 11.1 bullshit - Thanksss Claymore Team Good Job It's amazing that it's always the noobs with 20 random comments that manage to get the best results.. what a coincidence Yup. Utter BS.
|
Go Big or Go Home.
|
|
|
adaseb
Legendary
Offline
Activity: 3864
Merit: 1732
Up to 300% + 200 FS deposit bonuses
|
|
January 20, 2017, 02:44:15 AM |
|
Hey Guys,
I have an r7 370 that is not recognized anymore. The fans are spinning but Windows/Linux cannot see it
Since it has never happened to me before am i looking at a burnt card?
Since its a 370, you most likely still have warranty on it, send it to the manufacteur.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3864
Merit: 1732
Up to 300% + 200 FS deposit bonuses
|
|
January 20, 2017, 02:49:35 AM |
|
For all you unbelievables here are the results after 20 hours (look at the low rejection rate) I also have a 7950 in another rig running at 285H/s If you aren't getting these speeds, hack your memory straps, use 15.12 drivers, use windows 7. The other 2 slower Tahitis are 1000mhz core clock because they are the crap Gigabyte windforce and overheat easily so I can't run them at 1100mhz, however chances are they would run at 330h/s under 1200mhz. So the hashrate is clearly linked to engine core clock speed. However for them to run at 1200Mhz you would need to run at stock voltage or overvolt and your power consumption would be in the Scrypt Litecoin power consumption terrority. I am talking about 300-350Watt per GPU at the wall. Not worth the extra speed boost. Especially since the Gigabyte Windforce 7950/7970 were known to catch fire during the litecoin days.
|
|
|
|
fmz89
Legendary
Offline
Activity: 1764
Merit: 1002
|
|
January 20, 2017, 05:08:51 AM |
|
damn i miss old times when ocing tahiti, what result stock r9 280x? tahiti easy to get 1200mhz but crazy sucking power rx 480 8gb got 285 sol at stock clock/mem without asm, what speed under linux on asm mode?
|
|
|
|
jstefanop
Legendary
Offline
Activity: 2155
Merit: 1400
|
|
January 20, 2017, 06:11:58 AM |
|
For all you unbelievables here are the results after 20 hours (look at the low rejection rate) I also have a 7950 in another rig running at 285H/s If you aren't getting these speeds, hack your memory straps, use 15.12 drivers, use windows 7. The other 2 slower Tahitis are 1000mhz core clock because they are the crap Gigabyte windforce and overheat easily so I can't run them at 1100mhz, however chances are they would run at 330h/s under 1200mhz. So the hashrate is clearly linked to engine core clock speed. However for them to run at 1200Mhz you would need to run at stock voltage or overvolt and your power consumption would be in the Scrypt Litecoin power consumption terrority. I am talking about 300-350Watt per GPU at the wall. Not worth the extra speed boost. Especially since the Gigabyte Windforce 7950/7970 were known to catch fire during the litecoin days. Even at 1100 your crazy...that must be what in the 250 watt territory? I run my Tahiti's at 975 to keep them under 160 watts @ 270s/s. Don't think the extra 10-20S are worth the 50-100 watts per card.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3864
Merit: 1732
Up to 300% + 200 FS deposit bonuses
|
|
January 20, 2017, 06:58:38 AM |
|
For all you unbelievables here are the results after 20 hours (look at the low rejection rate) I also have a 7950 in another rig running at 285H/s If you aren't getting these speeds, hack your memory straps, use 15.12 drivers, use windows 7. The other 2 slower Tahitis are 1000mhz core clock because they are the crap Gigabyte windforce and overheat easily so I can't run them at 1100mhz, however chances are they would run at 330h/s under 1200mhz. So the hashrate is clearly linked to engine core clock speed. However for them to run at 1200Mhz you would need to run at stock voltage or overvolt and your power consumption would be in the Scrypt Litecoin power consumption terrority. I am talking about 300-350Watt per GPU at the wall. Not worth the extra speed boost. Especially since the Gigabyte Windforce 7950/7970 were known to catch fire during the litecoin days. Even at 1100 your crazy...that must be what in the 250 watt territory? I run my Tahiti's at 975 to keep them under 160 watts @ 270s/s. Don't think the extra 10-20S are worth the 50-100 watts per card. At 1100 it uses 200 watt only because you can still undervolt them.
|
|
|
|
ffthomas
|
|
January 20, 2017, 07:32:45 AM |
|
Hi,
I have a problem if I try to connect more than 6 GPUs to my AsRock H81 Pro BTC v2.0 mobo. I bought an extender riser (PCI-E x1 -> 3*PCI-E x1) and I use normal USB3 PCI-E x1->x16 risers. Everything's fine until I connect the 7th card. I can connect the first 6 card any way I want it but after the 7th card connected I got blank screen when I turn on the rig.
How do I make it work with 7 or 8 cards?
are you using Windows 7 perhaps? I have an 8 Card system and the only way I got them to work was with Windows 10 and Ubuntu. But it can also be the fact that your MB don't support more than 6 PCIE cards. Have you tried connecting 5 cards and one dual card? such as 7990, 295x ? I have two 7990 and 4 other cards in my 8 card system. Not using the PCI Switch. I use Win10, but I can't get to boot the OS. I turn on the rig and nothing happens. I don't have dual cards, I use RX470 GPUs. Maybe AsRock H81 Pro BTC v2.0 mobo doesn't support more than 6 PCI-E devices? I tried to disable integrated audio, serial ports, etc. in the bios, then connected the 7th card but also didn't work. I don't want to buy an expensive server/workstation mobo. Is there any chance to use 7 or 8 PCI-E devices? I searched for modded bios for this mobo but didn't find anything. Or it's the limit of the H81 chipset, not the bios?
|
|
|
|
samches
Newbie
Offline
Activity: 10
Merit: 0
|
|
January 20, 2017, 07:49:19 AM |
|
For all you unbelievables here are the results after 20 hours (look at the low rejection rate) I also have a 7950 in another rig running at 285H/s If you aren't getting these speeds, hack your memory straps, use 15.12 drivers, use windows 7. The other 2 slower Tahitis are 1000mhz core clock because they are the crap Gigabyte windforce and overheat easily so I can't run them at 1100mhz, however chances are they would run at 330h/s under 1200mhz. So the hashrate is clearly linked to engine core clock speed. However for them to run at 1200Mhz you would need to run at stock voltage or overvolt and your power consumption would be in the Scrypt Litecoin power consumption terrority. I am talking about 300-350Watt per GPU at the wall. Not worth the extra speed boost. Especially since the Gigabyte Windforce 7950/7970 were known to catch fire during the litecoin days. http://i68.tinypic.com/14sjosn.pngEven at 1100 your crazy...that must be what in the 250 watt territory? I run my Tahiti's at 975 to keep them under 160 watts @ 270s/s. Don't think the extra 10-20S are worth the 50-100 watts per card. At 1100 it uses 200 watt only because you can still undervolt them. can you share your 280x bios dump?
|
|
|
|
fronder59
Newbie
Offline
Activity: 6
Merit: 0
|
|
January 20, 2017, 08:04:49 AM |
|
For all you unbelievables here are the results after 20 hours (look at the low rejection rate) I also have a 7950 in another rig running at 285H/s If you aren't getting these speeds, hack your memory straps, use 15.12 drivers, use windows 7. The other 2 slower Tahitis are 1000mhz core clock because they are the crap Gigabyte windforce and overheat easily so I can't run them at 1100mhz, however chances are they would run at 330h/s under 1200mhz. So the hashrate is clearly linked to engine core clock speed. However for them to run at 1200Mhz you would need to run at stock voltage or overvolt and your power consumption would be in the Scrypt Litecoin power consumption terrority. I am talking about 300-350Watt per GPU at the wall. Not worth the extra speed boost. Especially since the Gigabyte Windforce 7950/7970 were known to catch fire during the litecoin days. http://i68.tinypic.com/14sjosn.pngon my 7970 I have 298H/s with 1100/1575, and it works without crash but i can't improve my Sapphire 280x Tri-X OC to this results, I have only 286H/s in stable. What clocks are you used? p.s. timings are 1250MHz
|
|
|
|
samches
Newbie
Offline
Activity: 10
Merit: 0
|
|
January 20, 2017, 09:08:14 AM |
|
on my 7970 I have 298H/s with 1100/1575, and it works without crash but i can't improve my Sapphire 280x Tri-X OC to this results, I have only 286H/s in stable. What clocks are you used? p.s. timings are 1250MHz
Strange I tried to mod bios, but i did not achieve any increase in performance. Maybe you could share your bios domp of 280x? atm i get 245-260h/s
|
|
|
|
Demarsac
|
|
January 20, 2017, 09:29:20 AM |
|
Hey Guys,
I have an r7 370 that is not recognized anymore. The fans are spinning but Windows/Linux cannot see it
Since it has never happened to me before am i looking at a burnt card?
Had the same issue, its mostlikely dead, try it in another rig and if it still not working its most likely dead, When you will try in the other rig, make sure its not on a riser, has to be on the MB slot. Thanks I will try this first Thank you @kdepfyffer i have tried multiple risers and rigs. I think its burnt @adaseb- I will probably do this in the end Thanks everyone for your thoughts and contribution
|
|
|
|
fronder59
Newbie
Offline
Activity: 6
Merit: 0
|
|
January 20, 2017, 10:04:49 AM |
|
Strange I tried to mod bios, but i did not achieve any increase in performance. Maybe you could share your bios domp of 280x? atm i get 245-260h/s I'm set timing same as 7970 on 280x, and hashrate is 286 on 1100/1575. I think it's becouse there are different processor in 7970 (XT) and 280x (XTL). I was trying to set 1133/1600 in bios, but card is froze computer, and i will restart it only on evening
|
|
|
|
Corerj
Newbie
Offline
Activity: 23
Merit: 0
|
|
January 20, 2017, 10:42:29 AM |
|
My rig show only GPU0 and GPU1 temp and fan, i have 2x 7990, under win 10, already tried all from catalyst 15.12 to 17.1(used ddu), tried all sort of config command(-asm 0, -tt 75,75,75,75 -wd 0). I'm worried because i used the command -ttli and -tstop to protect the rig, but that seems to affect only gpu0 and gpu1, already see gpu2 and gpu3 get to 100 celsius.... Already tried miner 10.0,11.0 and 11.1 Any tips?
|
|
|
|
thespycry
Newbie
Offline
Activity: 42
Merit: 0
|
|
January 20, 2017, 11:32:39 AM |
|
Can anyone explain, why ist the 6.gpu slower than the rest? 5 is ok. everything above 5 ist slower.. http://tinypic.com/r/ru0fo9/9
|
|
|
|
adaseb
Legendary
Offline
Activity: 3864
Merit: 1732
Up to 300% + 200 FS deposit bonuses
|
|
January 20, 2017, 11:33:30 AM |
|
Can anyone explain, why ist the 6.gpu slower than the rest? 5 is ok. everything above 5 ist slower.. plug into a monitor the last gpu.
|
|
|
|
dragonchopper9
|
|
January 20, 2017, 11:46:04 AM |
|
The maximum that I have seen on my 280x and 7970 was 250 h/s. How can I get 290 h/s? Do a modified BIOS provides significant increase?
|
|
|
|
|
|