Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[m1n1ngP4d4w4n]

guys do you have information about hashrate of gtx 1080 on zcash?

This is an AMD miner, check EWBF thread for infos

[1715274042]

1715274042

[1715274042]

1715274042

[1715274042]

1715274042

[zigun]

Anybody could share rates on 290 Ref (390 bios moded)?

[thedreamer]

Anybody could share rates on 290 Ref (390 bios moded)?

My Deep Thought calculator says "42"...

[Beachguy]

  holy-lee-crap

Had a lot going on over the holidays and being sick.....just had a chance to grab 11.1.
went from high 280's (intensity on the 6 version is like 4 on each card) to 660~670 steady!
running 1 - R9 270x 2GB and 2 - R9 270x 4GB and a HD7850 2 GB. The HD 7850 2 GB runs the video on the host computer as well.
Used to slow the vid down on that card but not now. Oh , and the 11.1 runs them at 6 Intensity.

btw - all stock clocks,win 7 - 64, 8gb ram, 15.12 drivers.
Not changing a thing, copied bat file from 6 to 11.1 and just let it ride on flypool.
This is amazing.

As always Claymore ....you rock!

[mr.bRxXx]

Yes of course. Mixed combinations work normal. Tested with 16.11.1 drivers, all works normal and good speed.
AsRock FM2+ BTC Board, Win7/x64 Ultimate, 6xGpuMod.

Sorry for offtopic, what board you recomend for FM2+ socket?

ASRock FM2A88X+ BTC
http://www.asrock.com/mb/AMD/FM2A88X+%20BTC/

Or ... if you are overseas (USA), there's a new products in the field ... old good BIOSTAR!
Dirtcheap of course, and intel platform.

http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=734
and
http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=849

tnx for your response for my last question

my motherboard  is z97 gaurd pro and i have 5 r9 390x can i use all of them on windows 7 64?

Absolutly YES. Big chance that even 6 of them will work normal (and that is not the case with RX series).

b.r.
Alex

[CODISMYLIFE]

guys any of you work with ASUS ROG ARESIII-8G?
i want to know hashrate of this card

[GTCG]

I've been thinking of patching the memory straps of my HD7950 cards. They both have Hynix VRAM so they should be suitable for this hack. Is it enough for me to follow the steps on this page: ?
http://www.overclock.net/t/1554360/tahiti-memory-timings-patch-for-hynix-vram

Basically: download the BIOS file, open it in VBE7 and save it & use the patch tool to implement the BIOS file?

[TheMiningDwarf]

I don't know if it works with MOD bios. I don't mess around with that - maybe someone else knows. It works just fine with RX480's. Here's a picture of Claymore 11.1 linux on Ubuntu 16.04 LTS using 6 RX480's:
>img clipped<

did you ever tried Optiminer on Ubuntu 16.04? People get 280-290 H/s on RX480 AFTER fees, not before (what you are posting).
Small difference, but still.

I get 305 per RX480 with optiminer
I have 18 RX480, do the maths, its a huge difference.

[QuintLeo]

guys do you have information about hashrate of gtx 1080 on zcash?

 Wrong thread, check NiceHash or EBWF threads as Claymore is AMD only.

[QuintLeo]

Yes of course. Mixed combinations work normal. Tested with 16.11.1 drivers, all works normal and good speed.
AsRock FM2+ BTC Board, Win7/x64 Ultimate, 6xGpuMod.

Sorry for offtopic, what board you recomend for FM2+ socket?

 ASRock FM2A88X Extreme 6+ on my most recent builds, but I prefer to do 3 card builds (it's got a pair of 1x slots on it I don't use though).


 I'm planning to wait for AM4 boards to start arriving retail before I even think about my next new buildup.

[CODISMYLIFE]

guys can we use both of nvidia and amd cards in one rig?
for example 1 r9 390x and 3 gtx 1070

[rpg]

I don't know if it works with MOD bios. I don't mess around with that - maybe someone else knows. It works just fine with RX480's. Here's a picture of Claymore 11.1 linux on Ubuntu 16.04 LTS using 6 RX480's:
>img clipped<

did you ever tried Optiminer on Ubuntu 16.04? People get 280-290 H/s on RX480 AFTER fees, not before (what you are posting).
Small difference, but still.

I get 305 per RX480 with optiminer
I have 18 RX480, do the maths, its a huge difference.

what driver are you using? I tried and only got 265. On the 7950 gave me 6 (yes six)

[jackcantrell]

I don't know if it works with MOD bios. I don't mess around with that - maybe someone else knows. It works just fine with RX480's. Here's a picture of Claymore 11.1 linux on Ubuntu 16.04 LTS using 6 RX480's:
>img clipped<

did you ever tried Optiminer on Ubuntu 16.04? People get 280-290 H/s on RX480 AFTER fees, not before (what you are posting).
Small difference, but still.

I get 305 per RX480 with optiminer
I have 18 RX480, do the maths, its a huge difference.

ok, so I can give optiminer a try. It says on the github page to use linux driver 16.40.5. I can't find that. I can find 16.40, and 16.50, but not 16.40.5. What's the linux driver version to use?

[fittsy]

guys can we use both of nvidia and amd cards in one rig?
for example 1 r9 390x and 3 gtx 1070

Read the first post.

This is AMD miner. No support for NVIDIA.

[sublimus]

guys can we use both of nvidia and amd cards in one rig?
for example 1 r9 390x and 3 gtx 1070

Sure can.

With Claymore use the parameter:
-di 0
And for your Nvidia cards use EWBF with the parameter:
--cuda_devices 012

[jackcantrell]

I don't know if it works with MOD bios. I don't mess around with that - maybe someone else knows. It works just fine with RX480's. Here's a picture of Claymore 11.1 linux on Ubuntu 16.04 LTS using 6 RX480's:
>img clipped<

did you ever tried Optiminer on Ubuntu 16.04? People get 280-290 H/s on RX480 AFTER fees, not before (what you are posting).
Small difference, but still.

I get 305 per RX480 with optiminer
I have 18 RX480, do the maths, its a huge difference.

ok, I installed optiminer 1.4 on ubuntu 16.04 with amdgpu-pro-16.50. Yes, it's faster on my XFX RX480-8G GPU's. Getting about 285 H/s per GPU.

I guess it's worth running it if it's stable, I just need to redo my log monitoring application.

https://i.imgur.com/bKLoumC.png

[orionpaxx12]

@claymore is there any chance for nvidia support, thanks for the awesome work

[Corerj]

My rig show only GPU0 and GPU1 temp and fan, i have 2x 7990, under win 10, already tried all from catalyst 15.12 to 17.1(used ddu), tried all sort of config command(-asm 0, -tt 75,75,75,75 -wd 0).
I'm worried because i used the command -ttli and -tstop to protect the rig, but that seems to affect only gpu0 and gpu1, already see gpu2 and gpu3 get to 100 celsius....
Already tried miner 10.0,11.0 and 11.1
Any tips?

it seems to be something windows related...under ubuntu 14.04 works great...

[sfmain1]

@ claymore. first off you sick for that one (11 series)  second do you think youll ever get the tonga cards past this speed bump?

@ the community . does 170 h/s sound right for the Tonga GPU(r9 380) windows 7? or are some people getting like 200 + or something like that.

thanks!!!

[maxmad_x]

I don't know if it works with MOD bios. I don't mess around with that - maybe someone else knows. It works just fine with RX480's. Here's a picture of Claymore 11.1 linux on Ubuntu 16.04 LTS using 6 RX480's:
>img clipped<

did you ever tried Optiminer on Ubuntu 16.04? People get 280-290 H/s on RX480 AFTER fees, not before (what you are posting).
Small difference, but still.

I get 305 per RX480 with optiminer
I have 18 RX480, do the maths, its a huge difference.

What is your power consumtion per card?