Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[fr4nkthetank]

You have to use the 15.12 drivers on optiminer to get 450 h/s for Fiji cards.
I'm getting 435-450 h/s on my R9 Nanos.

Yeah I know, I only have one fury, and its on my main computer for work/playing games.  Well...now its just for playing games
I'm going to get a 480 8g to replace it, and then move the fury with the other gpu's downstairs.  I didnt want to downgrade the drivers, and I do have a 470 also in that rig that mines all the time.  Soon it shall hash at ludricrous speeds

[orbital_station1]

I am getting a lot of miner thread hangs.
Then miner restarts only when I press 's'. Otherwise both of my 390 remain idle.

What could be the problem?

Is new 17.1 driver any better?

[AKRO]

I am getting a lot of miner thread hangs.
Then miner restarts only when I press 's'. Otherwise both of my 390 remain idle.

What could be the problem?

Is new 17.1 driver any better?

this has happened to me before, once one of my 390s failed to get recognized, but it worked fine. It could be that you set your undervolt too low, it depends on the manufacturer (i've got one that can OC balls to the wall with a -44mV, the other can't do better than -12mV and needs to go up to match the OC) and make sure crossfire is disabled.

[batko]

Claymore, soo new version this weekend? 

use optminer 1.6.0 for R9 2xx & R9 3xx series.

[trendafil]

Optminer is better for R9 2xx & R9 3xx I test

[jelin1984]

i think that no news version will be out\))))))))))))))))))))))))))))))

[Lucky - Luciano]

You do not need to  better Claymore miner - just buy a more powerful graphics card  .

[Calvinpie]

Optminer is better for R9 2xx & R9 3xx I test

I agree

6 290's and 3 390's on optiminer 350 sols more, no overclock!

[Diosel]

Optminer is better for R9 2xx & R9 3xx I test

I agree

6 290's and 3 390's on optiminer 350 sols more, no overclock!

  Optminer with 1 Asus 280x in Suprnova goes 290 / 310 Hashrate/s sure is more than the 250 / 260 with claymore 11.1 with the same 15.12

[AKRO]

I am getting a lot of miner thread hangs.
Then miner restarts only when I press 's'. Otherwise both of my 390 remain idle.

What could be the problem?

Is new 17.1 driver any better?

as far as I can tell, it's hell to use since Afterburner doesn't work, you have to use AMD wattman BS, and for whatever reason it's impossible to set the core voltage and the fans are a shitty approximation of RPM that won't follow where you set them, all things considered it's probably running a few degrees cooler, according to claymore i'm running 44% fans with 72c temps after 20 minutes, not sure if it sounds like 44% though. my 380 is giving me same temps but at half the fans.

I miss afterburner's simple specifics, i'm probably going to roll back. maybe for gamers who want simple settings like "low power" "extreme" "fast" "chill" "lit fam" then yeah i could see how wattman has a niche.

[Stealth8368]

Update on progress Claymore with new miner would be appreciated thanks

[zzzzzzzzzz]

Update on progress Claymore with new miner would be appreciated thanks

You might try reading the last few pages. Claymore posted an update a couple of days ago.

[Stealth8368]

Update on progress Claymore with new miner would be appreciated thanks

You might try reading the last few pages. Claymore posted an update a couple of days ago.

i have read every page of this thread and as far as I remember he stated he expected to release new miner this week,since we are coming to end of the week I was wondering if he was still on target,I just hate when people post to Claymore and some idiot feels the need to answer for him!

[Etherion]

He will release when he is ready. Not before.

[Golku]

Update on progress Claymore with new miner would be appreciated thanks

You might try reading the last few pages. Claymore posted an update a couple of days ago.

i have read every page of this thread and as far as I remember he stated he expected to release new miner this week,since we are coming to end of the week I was wondering if he was still on target,I just hate when people post to Claymore and some idiot feels the need to answer for him!

Now you are doing the "thing" what you also hate. Asking stupid questions lol. He will publish the miner when its ready. If you are in hurry for more hashing speed go and buy more cards.

[alucard20724]

He will release when he is ready. Not before.

exactly... i'd rather he release when he is ready, and not crap before hand.  

[Stealth8368]

He will release when he is ready. Not before.

god this thread is so toxic,going to give Optiminer a try,you really do spoil the community here.

[Stealth8368]

Since a few of you here have trouble reading I asked for an update on how things were going not for a software release,feel like I am communicating with children here,parents never tell you to speak when spoken to!

[zzzzzzzzzz]

Since a few of you here have trouble reading I asked for an update on how things were going not for a software release,feel like I am communicating with children here,parents never tell you to speak when spoken to!

Well I guess us wee ones were just lucky enough to read his last post where he said it was taking him a great deal of effort to put a GCN assembler dev environment (tool chain) in place, so he was just getting to the point where he could actually write the assembler-optimized code. But hey, we're all just stupid brats - hell, I'm only 63, just getting weaned off my momma's tit.

[forzendiablo]

ZEC is boring now..

lets find next big thing