ivomm
Legendary
Offline
Activity: 1880
Merit: 3046
All good things to those who wait
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 12:28:27 PM |
|
My Sapphire 280x toxic cards continue to hang almost every hour or two. I tried every possible settings for power, clocks, intensity, VM set to 24 GB and nothing works. Most of the cases -wd 1 or -r 0 options manage to restart the miner but sometimes the zecminer window is frozen, I can't even manually or with killing with the task manager close it. Is there a script that can recognize when a zecminer window is not responding and then restarting the windows? I know that -r 1 can restart but I don't want to do it so often. It will waste too much time since in 4 out of 5 cases -r 0 does the job.
|
|
|
|
golden0707
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 12:37:14 PM |
|
Is it normal for the wattage to slowly increase the longer you run the miners. And is it normal for the wattage to go up and down in a range and not a constant rate. This happens on all algos but for ZEC it will start around 540 watts go between say 580 and 540 then range will slowly will go over 600 watts. My PSU is 600w EVGA bronze which I is why I'm concerned. Is this normal or is there something wrong. Also is 550 to 600 watts normal for 3 470's, seems high.
i heard the 470s run at around 90 watts each. What CPU do you have? take one card out and measure again. The difference is what the card is using. High end CPUs may run at over 200 watts The CPU is amd fx 6200, it is rated as 125w. I was figuring 100 for each GPU and 125 for CPU should be 425 but it runs close to 600. Your system without cards draw up to 180-200watt with this CPU, add 140 watt per card, total 180+420 , its 600. All is correct. You can undervolt cards to get 110-120 watt power draw per card. My rig 6*470s runs at 850watts I have a 1000w psu 6 x 470 8gb, was running fine before with older claymore version but now I have to unplug 1 card for it to stay on...I think its the watts, 140watts x 6 = 840 + 200w for the rest of the parts.... Don't know how to under vault, have not really looked into it. You can use the MSI afterburner to undervolt. So I can undervolt without changing bios? Thought it was locked. It is locked by default , but in options menu it can be unlocked
|
|
|
|
snakey
Legendary
Offline
Activity: 1386
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 01:25:16 PM |
|
Is it normal for the wattage to slowly increase the longer you run the miners. And is it normal for the wattage to go up and down in a range and not a constant rate. This happens on all algos but for ZEC it will start around 540 watts go between say 580 and 540 then range will slowly will go over 600 watts. My PSU is 600w EVGA bronze which I is why I'm concerned. Is this normal or is there something wrong. Also is 550 to 600 watts normal for 3 470's, seems high.
i heard the 470s run at around 90 watts each. What CPU do you have? take one card out and measure again. The difference is what the card is using. High end CPUs may run at over 200 watts The CPU is amd fx 6200, it is rated as 125w. I was figuring 100 for each GPU and 125 for CPU should be 425 but it runs close to 600. Your system without cards draw up to 180-200watt with this CPU, add 140 watt per card, total 180+420 , its 600. All is correct. You can undervolt cards to get 110-120 watt power draw per card. My rig 6*470s runs at 850watts I have a 1000w psu 6 x 470 8gb, was running fine before with older claymore version but now I have to unplug 1 card for it to stay on...I think its the watts, 140watts x 6 = 840 + 200w for the rest of the parts.... Don't know how to under vault, have not really looked into it. You can use the MSI afterburner to undervolt. So I can undervolt without changing bios? Thought it was locked. It is locked by default , but in options menu it can be unlocked I will check that out, thank you...
|
|
|
|
m00nspeell
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 02:20:07 PM |
|
Anyone have any idea what's the best driver for rx480 for windows? I have a problem with all ReLive drives with my custom bios(signature check re-enabled) and the 16.12.2 also don't work with custom bios, only with 16.11.5. Any difference between them? Or suggest me another bios for stability. Thanx
|
|
|
|
bbkoopsta
Newbie
Offline
Activity: 95
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 02:49:06 PM |
|
Anyone have any idea what's the best driver for rx480 for windows? I have a problem with all ReLive drives with my custom bios(signature check re-enabled) and the 16.12.2 also don't work with custom bios, only with 16.11.5. Any difference between them? Or suggest me another bios for stability. Thanx
Hi try using drivers between version 16.08 - 16.10 i currently have 2 rigs with moded bios and both drivers they work like a charm
|
|
|
|
|
Dr_Victor
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 03:55:00 PM |
|
My Sapphire 280x toxic cards continue to hang almost every hour or two. I tried every possible settings for power, clocks, intensity, VM set to 24 GB and nothing works. Most of the cases -wd 1 or -r 0 options manage to restart the miner but sometimes the zecminer window is frozen, I can't even manually or with killing with the task manager close it. Is there a script that can recognize when a zecminer window is not responding and then restarting the windows? I know that -r 1 can restart but I don't want to do it so often. It will waste too much time since in 4 out of 5 cases -r 0 does the job.
Use v12.1 and be calm
|
yobit.net is banned from signatures
|
|
|
ivomm
Legendary
Offline
Activity: 1880
Merit: 3046
All good things to those who wait
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 04:07:29 PM |
|
My Sapphire 280x toxic cards continue to hang almost every hour or two. I tried every possible settings for power, clocks, intensity, VM set to 24 GB and nothing works. Most of the cases -wd 1 or -r 0 options manage to restart the miner but sometimes the zecminer window is frozen, I can't even manually or with killing with the task manager close it. Is there a script that can recognize when a zecminer window is not responding and then restarting the windows? I know that -r 1 can restart but I don't want to do it so often. It will waste too much time since in 4 out of 5 cases -r 0 does the job.
Use v12.1 and be calm 12.1, even 11.xx is the same story
|
|
|
|
bbkoopsta
Newbie
Offline
Activity: 95
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 04:45:41 PM |
|
My Sapphire 280x toxic cards continue to hang almost every hour or two. I tried every possible settings for power, clocks, intensity, VM set to 24 GB and nothing works. Most of the cases -wd 1 or -r 0 options manage to restart the miner but sometimes the zecminer window is frozen, I can't even manually or with killing with the task manager close it. Is there a script that can recognize when a zecminer window is not responding and then restarting the windows? I know that -r 1 can restart but I don't want to do it so often. It will waste too much time since in 4 out of 5 cases -r 0 does the job.
Use v12.1 and be calm 12.1, even 11.xx is the same story everything is good here with 16.10.3 & 16.9.2 i tried 16.8 it's working properly
|
|
|
|
jddebug
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 05:22:14 PM |
|
My Sapphire 280x toxic cards continue to hang almost every hour or two. I tried every possible settings for power, clocks, intensity, VM set to 24 GB and nothing works. Most of the cases -wd 1 or -r 0 options manage to restart the miner but sometimes the zecminer window is frozen, I can't even manually or with killing with the task manager close it. Is there a script that can recognize when a zecminer window is not responding and then restarting the windows? I know that -r 1 can restart but I don't want to do it so often. It will waste too much time since in 4 out of 5 cases -r 0 does the job.
Use v12.1 and be calm 12.1, even 11.xx is the same story Nearly every time I have an issue like yours I'm able to fix it by turning off the rig, unplug the video cards from the risers, unplug the risers from the mother board, unplug the pcie cables from the video cards, unplug the pcie cables from the psu. Next I put it all back together and assure very good connections. The has fixed my issues every time. What I usually do is simply shit it down and re affirm all connections but I follow the above procedure if just re seating all cables without disconnecting everything fails.
|
|
|
|
stoon
Newbie
Offline
Activity: 46
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 05:52:23 PM |
|
My Sapphire 280x toxic cards continue to hang almost every hour or two. I tried every possible settings for power, clocks, intensity, VM set to 24 GB and nothing works. Most of the cases -wd 1 or -r 0 options manage to restart the miner but sometimes the zecminer window is frozen, I can't even manually or with killing with the task manager close it. Is there a script that can recognize when a zecminer window is not responding and then restarting the windows? I know that -r 1 can restart but I don't want to do it so often. It will waste too much time since in 4 out of 5 cases -r 0 does the job.
I have 6 of these cards. 1150 core, 1500 mem, 15.12 drivers, Win 10, 60% fan are the best IMO. They do consume a lot of power so make sure you have a good PSU(s) and that has a good over head of power. 5 x 280x Vapors and a 7990 at these settings use 1557watts for ZEC.
|
|
|
|
Buffcorp
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 101
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 06:04:27 PM |
|
I am having an issue mining. I have been using Claymore 12.4 miner and its been working over the past couple days however today its showing its mining but its not submitting any shares. I have tried rebooting the PC, using different pool, changed driver to 16.2.3 but nothing seems to work when using claymore 12.4.
If I use genoil it submits shares.
Any suggestions to make this work on claymore 12.4?
|
|
|
|
Xardas2014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 06:09:00 PM |
|
Something I do when assembling a miner is to use an eraser on all the contacts to remove any oils or corrosion/oxidation. I suppose a normal pencil eraser would work in a pinch, but I always keep stand-alone erasers on hand. You know.......the rectangular erasers an inch or so wide and a couple of inches long and maybe 3/8th thick.
|
|
|
|
bbkoopsta
Newbie
Offline
Activity: 95
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 24, 2017, 08:03:11 PM |
|
Something I do when assembling a miner is to use an eraser on all the contacts to remove any oils or corrosion/oxidation. I suppose a normal pencil eraser would work in a pinch, but I always keep stand-alone erasers on hand. You know.......the rectangular erasers an inch or so wide and a couple of inches long and maybe 3/8th thick.
OMG this is one of the best advices im getting these days, thanks a lot Xardas2014 it worked like a charm on one of my old cards
|
|
|
|
AriesIV10
Legendary
Offline
Activity: 1260
Merit: 1006
Mine for a Bit
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2017, 02:14:16 AM |
|
Anybody tried the Biostar TB250 mobo?
I was thinking of trying it out but thought maybe you guys already had and have any advise
Thanks...
Have absolutely same question. Some RXs are shipping towards me and expect them next week. Does anybody tried this mobo with 5/6 gpus on? Oh, yes! Many run 6 on one motherboard and some run 7 gpus.
|
|
|
|
Mitja1998
Newbie
Offline
Activity: 56
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2017, 11:14:21 AM |
|
Something I do when assembling a miner is to use an eraser on all the contacts to remove any oils or corrosion/oxidation. I suppose a normal pencil eraser would work in a pinch, but I always keep stand-alone erasers on hand. You know.......the rectangular erasers an inch or so wide and a couple of inches long and maybe 3/8th thick.
Do you mean rubber eraser?
|
|
|
|
haxiboy
Newbie
Offline
Activity: 36
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2017, 11:19:16 AM |
|
My Sapphire 280x toxic cards continue to hang almost every hour or two. I tried every possible settings for power, clocks, intensity, VM set to 24 GB and nothing works. Most of the cases -wd 1 or -r 0 options manage to restart the miner but sometimes the zecminer window is frozen, I can't even manually or with killing with the task manager close it. Is there a script that can recognize when a zecminer window is not responding and then restarting the windows? I know that -r 1 can restart but I don't want to do it so often. It will waste too much time since in 4 out of 5 cases -r 0 does the job.
I'm working on something like this but this will be a dedicated miner hardware to do the job ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
|
Mitja1998
Newbie
Offline
Activity: 56
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2017, 12:36:06 PM |
|
Thank you for your tip. I have similar problem like ivomm and will definitely try this if only reassembling does not help. I have 3 rx470, 1 rx480 and 1 hd7950. HD7950 hangs in OpenCl after an hour and whole miner freezes.
|
|
|
|
Durango099
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 25, 2017, 06:05:36 PM |
|
Running v12.4 ZEC on Win7x64 with 4 AMD cards - none show up with a GPU temp. The miner is hashing correctly, just not showing temp in Miner or Miner Manager. I have 15.2 downloaded, however the current version is 17.10
Do you think the issue is with the newer drivers?
I have the same driver on ETH v12.4 and the temp reports correctly, though it is running on Win10x64
Any ideas?
|
|
|
|
|