djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
August 14, 2014, 09:55:50 AM Last edit: August 14, 2014, 10:28:53 AM by djm34 |
|
Thanks djm!
Question: is it working for solomining?
yes... I'm not sure. I always get "submit_upstream_work OOM" which I guess is out of memory error, which is strange as it has plenty of memory and it only happens during solomining and I should have found half a dozen blocks by now. I need to check that, I know for sure the first version was working on testnet wallet since it was developed around it. This error has nothing to do with memory, it just mean it wasn't able to submit its work to the wallet. edit: the problem should be corrected in this version: https://mega.co.nz/#!RVNw1JgC!SLiKTtkMLQ7wdZOVzxHKv2LxGpXcpSbNHYxagrllVJI
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
go6ooo1212
Legendary
Offline
Activity: 1512
Merit: 1000
quarkchain.io
|
|
August 14, 2014, 01:09:00 PM |
|
My rig of 6x750Ti was working some hours with previous reliece of ccminev and then have been stoping responding. I set it v2 now, and I'm testing.. With the first reliece (posted into cryptonite thread) the rig was pritty stable...
|
|
|
|
myagui
Legendary
Offline
Activity: 1154
Merit: 1001
|
|
August 14, 2014, 01:17:07 PM |
|
My rig of 6x750Ti was working some hours with previous reliece of ccminev and then have been stoping responding. I set it v2 now, and I'm testing.. With the first reliece (posted into cryptonite thread) the rig was pritty stable...
As the new version puts out greater hashrate, it is most certain that it is pushing the cards harder. Usually that just means that you need to turn down your overclocking a bit, if you were right at the edge of stability. The best practice and for maximum performance, is that for any new algorithm, you should start from 0 overclock (or a very modest one), and work your way up to find out what the highest setting that the cards will take with that algorithm. An overclock that works fine for X13 mining, might crash with X11 mining (just a random example). Happy Mining, ~ Myagui
|
|
|
|
go6ooo1212
Legendary
Offline
Activity: 1512
Merit: 1000
quarkchain.io
|
|
August 14, 2014, 01:30:43 PM |
|
My rig of 6x750Ti was working some hours with previous reliece of ccminev and then have been stoping responding. I set it v2 now, and I'm testing.. With the first reliece (posted into cryptonite thread) the rig was pritty stable...
As the new version puts out greater hashrate, it is most certain that it is pushing the cards harder. Usually that just means that you need to turn down your overclocking a bit, if you were right at the edge of stability. The best practice and for maximum performance, is that for any new algorithm, you should start from 0 overclock (or a very modest one), and work your way up to find out what the highest setting that the cards will take with that algorithm. An overclock that works fine for X13 mining, might crash with X11 mining (just a random example). Happy Mining, ~ Myagui Thanks , I was thinking about certain thing , I'll test it longer and will give a feedback
|
|
|
|
sciakysystem
|
|
August 14, 2014, 02:39:23 PM |
|
I confirm my problem were 16to16 risers.. I confirm that 1400mhz core clock is a stable OC for evga 750ti ACX cooler version.. 3 hours of mining with 6 750ti at 1400mhz and all it is ok until now. Im mining x11.
Many thanks for your help to solve my issue.
|
|
|
|
MCMK
|
|
August 14, 2014, 02:50:55 PM |
|
Thanks djm!
Question: is it working for solomining?
yes... I'm not sure. I always get "submit_upstream_work OOM" which I guess is out of memory error, which is strange as it has plenty of memory and it only happens during solomining and I should have found half a dozen blocks by now. I need to check that, I know for sure the first version was working on testnet wallet since it was developed around it. This error has nothing to do with memory, it just mean it wasn't able to submit its work to the wallet. edit: the problem should be corrected in this version: https://mega.co.nz/#!RVNw1JgC!SLiKTtkMLQ7wdZOVzxHKv2LxGpXcpSbNHYxagrllVJI I cannot connect to any pools. Tried 3 all unable to connect =*(
|
|
|
|
myagui
Legendary
Offline
Activity: 1154
Merit: 1001
|
|
August 14, 2014, 02:56:11 PM Last edit: August 14, 2014, 03:06:51 PM by myagui |
|
I cannot connect to any pools. Tried 3 all unable to connect =*(
Perhaps post your batch/command parameters to see if there's something off. Edit: In other news, JPC is fast approaching a good looking jackpot again (~2 BTC), though not sure it's worthwhile mining it unless you're the one hitting the jackpot! ~ Myagui
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
August 14, 2014, 03:12:25 PM |
|
Thanks djm!
Question: is it working for solomining?
yes... I'm not sure. I always get "submit_upstream_work OOM" which I guess is out of memory error, which is strange as it has plenty of memory and it only happens during solomining and I should have found half a dozen blocks by now. I need to check that, I know for sure the first version was working on testnet wallet since it was developed around it. This error has nothing to do with memory, it just mean it wasn't able to submit its work to the wallet. edit: the problem should be corrected in this version: https://mega.co.nz/#!RVNw1JgC!SLiKTtkMLQ7wdZOVzxHKv2LxGpXcpSbNHYxagrllVJI I cannot connect to any pools. Tried 3 all unable to connect =*( might be on your side... or some wrong parameters
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
camelion
Newbie
Offline
Activity: 1
Merit: 0
|
|
August 14, 2014, 05:12:54 PM |
|
Hey guys, i dont know if this is a normal behaviour of cudaMiner, cuz i just started to mine a couple of days ago, but my cudaMiner is always telling me, that stratum has detected a new block, but it's finding an accepted share extreme rarely. [2014-08-14 18:58:29] Stratum detected new block [2014-08-14 18:58:29] GPU #0: GeForce GT 240M, 15.43 khash/s [2014-08-14 18:59:31] Stratum detected new block [2014-08-14 18:59:31] GPU #0: GeForce GT 240M, 14.59 khash/s [2014-08-14 18:59:38] Stratum detected new block [2014-08-14 18:59:38] GPU #0: GeForce GT 240M, 14.97 khash/s [2014-08-14 18:59:51] Stratum detected new block [2014-08-14 18:59:51] GPU #0: GeForce GT 240M, 14.83 khash/s [2014-08-14 19:00:04] Stratum detected new block [2014-08-14 19:00:04] GPU #0: GeForce GT 240M, 15.13 khash/s [2014-08-14 19:00:18] Stratum detected new block [2014-08-14 19:00:18] GPU #0: GeForce GT 240M, 16.19 khash/s [2014-08-14 19:00:35] Stratum detected new block [2014-08-14 19:00:35] GPU #0: GeForce GT 240M, 15.95 khash/s [2014-08-14 19:00:46] Stratum detected new block [2014-08-14 19:00:46] GPU #0: GeForce GT 240M, 15.87 khash/s
Thats, what i sometimes get for an hour or even two, before it's finding an accepted share, even my cpu-miner got a bigger rate of accepted shares with just about 6khash/s the configuration i use: cudaminer.exe -H 1 -i 0 -m 1 -l f18x3 -a scrypt -o stratum+tcp://pool:port -u user.worker -p x i also tried if it would work better, if i allow the autoconfiguration, but there's no difference. So, can you guys help me pls? is it normal in this way, or is there something going wrong?
|
|
|
|
baton
Newbie
Offline
Activity: 25
Merit: 0
|
|
August 14, 2014, 05:17:15 PM |
|
what is const int throughput = 256*256*8; in the ccminer code and why it is what it is ? I mean 256x256x8 ? thanks.
|
|
|
|
cayars
|
|
August 14, 2014, 05:28:23 PM |
|
what is const int throughput = 256*256*8; in the ccminer code and why it is what it is ? I mean 256x256x8 ? thanks. Same thing as writing = 524288; 256*256*8 just makes it easier from a dev standpoint to understand where the number came from. throughput is usually the 2nd parameter passed to most functions that use it (threads). Carlo
|
|
|
|
baton
Newbie
Offline
Activity: 25
Merit: 0
|
|
August 14, 2014, 05:33:58 PM |
|
what is const int throughput = 256*256*8; in the ccminer code and why it is what it is ? I mean 256x256x8 ? thanks. Same thing as writing = 524288; 256*256*8 just makes it easier from a dev standpoint to understand where the number came from. throughput is usually the 2nd parameter passed to most functions that use it (threads). Carlo thanks. but where it comes from ? why it is not 1024x1024x64 ? is it e.g. maximum x-, y-, or z-dimension of a grid of thread blocks or something like that ? hardware related ?
|
|
|
|
MCMK
|
|
August 14, 2014, 05:34:15 PM |
|
Thanks djm!
Question: is it working for solomining?
yes... I'm not sure. I always get "submit_upstream_work OOM" which I guess is out of memory error, which is strange as it has plenty of memory and it only happens during solomining and I should have found half a dozen blocks by now. I need to check that, I know for sure the first version was working on testnet wallet since it was developed around it. This error has nothing to do with memory, it just mean it wasn't able to submit its work to the wallet. edit: the problem should be corrected in this version: https://mega.co.nz/#!RVNw1JgC!SLiKTtkMLQ7wdZOVzxHKv2LxGpXcpSbNHYxagrllVJI I cannot connect to any pools. Tried 3 all unable to connect =*( might be on your side... or some wrong parameters My bat is pretty simple: ccminer.exe -a m7 -o stratum+tcp://erebor.dwarfpool.com:8050 -u 46vNVkVQRPibMbUuVtup9HNZvY59BqhYBioF6zF61QsNQez1NpwSiv6ARwkBxRCWq7X538p3kPCika8 ZNRLoy59pSCtm4Hb -p x Same basic structure all my bats are. m7 is cor XMR right? perhaps i just misread.
|
|
|
|
topnetdeal
Member
Offline
Activity: 61
Merit: 10
|
|
August 14, 2014, 05:36:24 PM |
|
m7 = XCN = Cryptonite = http://xcn.1gh.com/
|
▒ NOW token ▒ by ChangeNOW ▒ Get the WIN! ▒ ChangeNOW - an instant Non-custodial Exchange Service (( changenow.io ))
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
August 14, 2014, 05:40:06 PM |
|
what is const int throughput = 256*256*8; in the ccminer code and why it is what it is ? I mean 256x256x8 ? thanks. Same thing as writing = 524288; 256*256*8 just makes it easier from a dev standpoint to understand where the number came from. throughput is usually the 2nd parameter passed to most functions that use it (threads). Carlo thanks. but where it comes from ? why it is not 1024x1024x64 ? is it e.g. maximum x-, y-, or z-dimension of a grid of thread blocks or something like that ? hardware related ? may-be you can try...
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
antonio8
Legendary
Offline
Activity: 1386
Merit: 1000
|
|
August 14, 2014, 05:43:55 PM |
|
Thanks djm!
Question: is it working for solomining?
yes... I'm not sure. I always get "submit_upstream_work OOM" which I guess is out of memory error, which is strange as it has plenty of memory and it only happens during solomining and I should have found half a dozen blocks by now. I need to check that, I know for sure the first version was working on testnet wallet since it was developed around it. This error has nothing to do with memory, it just mean it wasn't able to submit its work to the wallet. edit: the problem should be corrected in this version: https://mega.co.nz/#!RVNw1JgC!SLiKTtkMLQ7wdZOVzxHKv2LxGpXcpSbNHYxagrllVJI I cannot connect to any pools. Tried 3 all unable to connect =*( might be on your side... or some wrong parameters My bat is pretty simple: ccminer.exe -a m7 -o stratum+tcp://erebor.dwarfpool.com:8050 -u 46vNVkVQRPibMbUuVtup9HNZvY59BqhYBioF6zF61QsNQez1NpwSiv6ARwkBxRCWq7X538p3kPCika8 ZNRLoy59pSCtm4Hb -p x Same basic structure all my bats are. m7 is cor XMR right? perhaps i just misread. -a cryptonight is what you use for xmr, I do believe.
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
August 14, 2014, 05:48:45 PM |
|
Thanks djm!
Question: is it working for solomining?
yes... I'm not sure. I always get "submit_upstream_work OOM" which I guess is out of memory error, which is strange as it has plenty of memory and it only happens during solomining and I should have found half a dozen blocks by now. I need to check that, I know for sure the first version was working on testnet wallet since it was developed around it. This error has nothing to do with memory, it just mean it wasn't able to submit its work to the wallet. edit: the problem should be corrected in this version: https://mega.co.nz/#!RVNw1JgC!SLiKTtkMLQ7wdZOVzxHKv2LxGpXcpSbNHYxagrllVJI I cannot connect to any pools. Tried 3 all unable to connect =*( might be on your side... or some wrong parameters My bat is pretty simple: ccminer.exe -a m7 -o stratum+tcp://erebor.dwarfpool.com:8050 -u 46vNVkVQRPibMbUuVtup9HNZvY59BqhYBioF6zF61QsNQez1NpwSiv6ARwkBxRCWq7X538p3kPCika8 ZNRLoy59pSCtm4Hb -p x Same basic structure all my bats are. m7 is cor XMR right? perhaps i just misread. -a cryptonight is what you use for xmr, I do believe. It isn't included in my release (it is in tsiv release)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
MCMK
|
|
August 14, 2014, 06:01:04 PM |
|
Ok. Sorry about the mix up. Thanks guys. Thanks djm!
Question: is it working for solomining?
yes... I'm not sure. I always get "submit_upstream_work OOM" which I guess is out of memory error, which is strange as it has plenty of memory and it only happens during solomining and I should have found half a dozen blocks by now. I need to check that, I know for sure the first version was working on testnet wallet since it was developed around it. This error has nothing to do with memory, it just mean it wasn't able to submit its work to the wallet. edit: the problem should be corrected in this version: https://mega.co.nz/#!RVNw1JgC!SLiKTtkMLQ7wdZOVzxHKv2LxGpXcpSbNHYxagrllVJI I cannot connect to any pools. Tried 3 all unable to connect =*( might be on your side... or some wrong parameters My bat is pretty simple: ccminer.exe -a m7 -o stratum+tcp://erebor.dwarfpool.com:8050 -u 46vNVkVQRPibMbUuVtup9HNZvY59BqhYBioF6zF61QsNQez1NpwSiv6ARwkBxRCWq7X538p3kPCika8 ZNRLoy59pSCtm4Hb -p x Same basic structure all my bats are. m7 is cor XMR right? perhaps i just misread. -a cryptonight is what you use for xmr, I do believe. It isn't included in my release (it is in tsiv release)
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
|
August 14, 2014, 07:09:16 PM |
|
Ok. Sorry about the mix up. Thanks guys.
It's not your fault... And for the record there is also an x11 coin called cryptonite... xcn dev hesitated a long time between cryptonite and pandacoin
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
labestia
Member
Offline
Activity: 86
Merit: 10
|
|
August 14, 2014, 07:17:05 PM |
|
anyone have a ballpark for how many XCN they're getting per 750ti/day at current diff?
|
|
|
|
|