▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂

[Fromage]

Hi,
Been trying ZPool and Hash Refinery Mining Pool but yet to get a payout to my actual wallet.

Still a little way off hitting the payout threshold with Zpool but a bit concerned that I have had over 0.0013 BTC Confirmed on Hash Refinery Mining Pool since mid last week but it didn't payout automatically on Sunday.

On the main page it says:

"Payouts are made automatically every 8 hours for all balances above 0.0025, or 0.00025 on Sunday."

As my balance was well over the 0.00025 well before Sunday, wondering why it hasn't payed out?

Just to confirm it does show my correct Bitcoin wallet address under the wallet section on ZPool and Hash Refinery Mining Pool. Still a little way off hitting the threshold of 0.0015 for Zpool but wondering it looks like it might end up with the same issue.

Mining Pool Hub has already payed out to the same wallet address successfully.

Yeah first of all this is Zpool's bitcointalk....Pm me for more info on the other one

[1715135887]

1715135887

[1715135887]

1715135887

[cryptolelefla]

still having different time same miner's name on dashboard. it is a miner problem(prospector) or something else.
i also had a screenshot on my precedent post.
hope pool support have a few second to reply me. thanks

[jmvarner83]

Mined 4 bitcore blocks, they went to exchange and came back cleared but wallet balance never moved or updated and no deposit.

[guytechie]

All mining stopped.  Cannot connect to the pool.

[crackfoo]

This week I'm in the process of replacing the main zpool server which runs the frontend, sql and stratums. This requires updates to all the coin boxes due to new IP's. There be some bumps along the way as coinds are restarted etc... interruptions should be fairly short and will announce when the actual changeover will take place. I'm hoping later today to pull the trigger.

[Windozxpert]

This week I'm in the process of replacing the main zpool server which runs the frontend, sql and stratums. This requires updates to all the coin boxes due to new IP's. There be some bumps along the way as coinds are restarted etc... interruptions should be fairly short and will announce when the actual changeover will take place. I'm hoping later today to pull the trigger.

Cool beans. I just noticed all my Neoscrypt miners were down and was about to mention it. Thanks for the server upgrade. Anything we can do to help?

[crackfoo]

This week I'm in the process of replacing the main zpool server which runs the frontend, sql and stratums. This requires updates to all the coin boxes due to new IP's. There be some bumps along the way as coinds are restarted etc... interruptions should be fairly short and will announce when the actual changeover will take place. I'm hoping later today to pull the trigger.

Cool beans. I just noticed all my Neoscrypt miners were down and was about to mention it. Thanks for the server upgrade. Anything we can do to help?

yes, I hope this will allow for a much more responsive webpage as well as stratums, the machine is more than twice as big and fast with 100% ssd now.

Just be patient I've one more coin box to reconfigure and a bunch more coinds will be restarted, then I can get back to finishing the setup on the main server.

I stopped the scripts just now cause I failed to look at the new payout time and it was right now, so I want those coins back online before kicking off the payout. Mining should still be working though on most all algos and the blocks will get processed in a few more mins.

[guytechie]

This week I'm in the process of replacing the main zpool server which runs the frontend, sql and stratums. This requires updates to all the coin boxes due to new IP's. There be some bumps along the way as coinds are restarted etc... interruptions should be fairly short and will announce when the actual changeover will take place. I'm hoping later today to pull the trigger.

That explains it.  Thanks!

[balloontree]

Hi guys,

I just got myself a L3+, is the following correct to setup it up to give payouts in Bitcoin?

Address: stratum+tcp://scrypt.mine.zpool.ca:3433
UserID: <Bitcoin WALLET_ADDRESS>
Password: c=BTC,d=65536

Also, can I set a difficulty higher than 65536? Or maybe not set it at all?



If I want to receive different coins as payout, are the following correct?

Ether: c=ETH
Litecoin: c=LTC
Ripple: c=XRP
Dash: c=DASH
ZCash: c=ZCASH
XMR: c=XMR

Thanks!

[crackfoo]

Hi guys,

I just got myself a L3+, is the following correct to setup it up to give payouts in Bitcoin?

Address: stratum+tcp://scrypt.mine.zpool.ca:3433
UserID: <Bitcoin WALLET_ADDRESS>
Password: c=BTC,d=65536

Also, can I set a difficulty higher than 65536? Or maybe not set it at all?



If I want to receive different coins as payout, are the following correct?

Ether: c=ETH
Litecoin: c=LTC
Ripple: c=XRP
Dash: c=DASH
ZCash: c=ZCASH
XMR: c=XMR

Thanks!

yes you can set it higher if you want. I don't have one of those so you may have to try some different values to get one that the miner runs well on.

We don't have payouts in ETH XRP ZCASH or XMR. LTC we don't mine yet but I occasionally fill the wallet but its a manual process so payouts arn't regular. DASH is ok, just keep an eye on the pool stats. It list as red if there is not enough DASH to pay do to no blocks being found recently.

[crackfoo]

I'll be flipping the switch to the new server shortly. Looks like everything is primed and ready. I've not done this move in 2y so there may be something I forgot but AFAIK, it should be fairly smooth. The longest process will be performing the DB backup after the live server shuts down, moving and importing it and then waiting for the IP block to get moved to the new server which in the past takes 4-5 mins.

[jmvarner83]

I'll be flipping the switch to the new server shortly. Looks like everything is primed and ready. I've not done this move in 2y so there may be something I forgot but AFAIK, it should be fairly smooth. The longest process will be performing the DB backup after the live server shuts down, moving and importing it and then waiting for the IP block to get moved to the new server which in the past takes 4-5 mins.

Do you care to check into lost shares?  Two of us hoped on your server and never got paid on BTX shares. 1P79qNbj6R9K7RfyNbgWsSYTiptUGgCMhK is wallet ID

Thanks!

[crackfoo]

I'll be flipping the switch to the new server shortly. Looks like everything is primed and ready. I've not done this move in 2y so there may be something I forgot but AFAIK, it should be fairly smooth. The longest process will be performing the DB backup after the live server shuts down, moving and importing it and then waiting for the IP block to get moved to the new server which in the past takes 4-5 mins.

Do you care to check into lost shares?  Two of us hoped on your server and never got paid on BTX shares. 1P79qNbj6R9K7RfyNbgWsSYTiptUGgCMhK is wallet ID

Thanks!

BTX markets were down for ~24h there a couple days go so it look like they were 0 value.

[crackfoo]

I'll be flipping the switch to the new server shortly. Looks like everything is primed and ready. I've not done this move in 2y so there may be something I forgot but AFAIK, it should be fairly smooth. The longest process will be performing the DB backup after the live server shuts down, moving and importing it and then waiting for the IP block to get moved to the new server which in the past takes 4-5 mins.

Upgrade completed. Downtime was ~15m at most. Any issues you see that are new let me know.

Cheers

[Pirozhkov]

I'll be flipping the switch to the new server shortly. Looks like everything is primed and ready. I've not done this move in 2y so there may be something I forgot but AFAIK, it should be fairly smooth. The longest process will be performing the DB backup after the live server shuts down, moving and importing it and then waiting for the IP block to get moved to the new server which in the past takes 4-5 mins.

Upgrade completed. Downtime was ~15m at most. Any issues you see that are new let me know.

Cheers

Hello.
I started to mine on your pool. And he indicated the address of the SIGT.
My .bat file:

ccminer-x64 -a skunk -o stratum+tcp://mine.zpool.ca:8433 -u BMnB8DM5LXVZDTgr5E82toYZkiuLYCVPWW -p c=sigt --cpu-priority=5 -d 0 -i 25
pause

You are told:

You can also use any valid wallet address from any of the coins we mine. This feature has had minimal testing so use at your own risk

So I used the SIGT address.
But I saw this:
https://i.imgur.com/T9DJ3gy.png
So how do I get paid and what address to use?
Thank you. Sorry, for bad english.

[Windozxpert]

Neoscrypt is down?

[Windozxpert]

Neoscrypt is down?

It's up now. Must have been a hiccup

[ItsCrafty]

I am not getting this.

.\sgminer\sgminer.exe -k x11mod -o stratum+tcp://x11.mine.zpool.ca:3533 -u 1DRncKyjnLJE99zk3p3HB7YhkeDGBvZAky -p c=BTC -I 20 -g 2 -w 256 --auto-fan --thread-concurrency 8192 --lookup-gap 2 --vectors 1

Bfgminer --scrypt -o stratum+tcp://scrypt.mine.zpool.ca:3433 -u 1DRncKyjnLJE99zk3p3HB7YhkeDGBvZAky -p c=BTC -d 32 --auto-fan --intensity 20

I tried mining with both these combinations and with 1.4MH speed for x11 and 480Kh for scrypt, not a single hash is getting registered on Zpool.

What am I doing wrong?

Any help is appreciated.

[balloontree]

Hi guys,

I just got myself a L3+, is the following correct to setup it up to give payouts in Bitcoin?

Address: stratum+tcp://scrypt.mine.zpool.ca:3433
UserID: <Bitcoin WALLET_ADDRESS>
Password: c=BTC,d=65536

Also, can I set a difficulty higher than 65536? Or maybe not set it at all?



If I want to receive different coins as payout, are the following correct?

Ether: c=ETH
Litecoin: c=LTC
Ripple: c=XRP
Dash: c=DASH
ZCash: c=ZCASH
XMR: c=XMR

Thanks!

yes you can set it higher if you want. I don't have one of those so you may have to try some different values to get one that the miner runs well on.

We don't have payouts in ETH XRP ZCASH or XMR. LTC we don't mine yet but I occasionally fill the wallet but its a manual process so payouts arn't regular. DASH is ok, just keep an eye on the pool stats. It list as red if there is not enough DASH to pay do to no blocks being found recently.

Is there a way to differentiate the different L3+ mining at your site? I have about 100+

Like which is mining at what capacity or which does better payouts, so we would know if the hash board is broken

[crackfoo]

Hi guys,

I just got myself a L3+, is the following correct to setup it up to give payouts in Bitcoin?

Address: stratum+tcp://scrypt.mine.zpool.ca:3433
UserID: <Bitcoin WALLET_ADDRESS>
Password: c=BTC,d=65536

Also, can I set a difficulty higher than 65536? Or maybe not set it at all?



If I want to receive different coins as payout, are the following correct?

Ether: c=ETH
Litecoin: c=LTC
Ripple: c=XRP
Dash: c=DASH
ZCash: c=ZCASH
XMR: c=XMR

Thanks!

yes you can set it higher if you want. I don't have one of those so you may have to try some different values to get one that the miner runs well on.

We don't have payouts in ETH XRP ZCASH or XMR. LTC we don't mine yet but I occasionally fill the wallet but its a manual process so payouts arn't regular. DASH is ok, just keep an eye on the pool stats. It list as red if there is not enough DASH to pay do to no blocks being found recently.

Is there a way to differentiate the different L3+ mining at your site? I have about 100+

Like which is mining at what capacity or which does better payouts, so we would know if the hash board is broken

I would first let the pool handle the diff, then set it to whatever diff most of your miners stick with. Then you can make it even all across the board.

It looks like most of the L3+'s have diff's between 75000 - 100000