pallas (OP)
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
June 26, 2017, 07:44:09 AM |
|
Hmm the wallet might still need some fixing. I came accross some failed asserts the other day when setting up my old desktop to run a full node (no tx pruning).
I did too, but much less frequently than before the fixes. About that @pallas: Am I correct to add the "-txindex 1" parameter to the wallet path? While saying that: the selektion21.de explorer is still running a normal node. Once I get confirmation for that parameter, I will add it and have it run a full tx history.
And next time I see that assert fail, I will post a debug.log.
Yes the parameter is used to keep a local index of all the transactions, even though the block explorer may get the information directly from the blocks, otherwise how could it show the information already :-) I didn't look at the explorer code enough to give you an answer right away, but I can look into it later, if you need it.
|
|
|
|
|
|
There are several different types of Bitcoin clients. The most secure are full nodes like Bitcoin Core, which will follow the rules of the network no matter what miners do. Even if every miner decided to create 1000 bitcoins per block, full nodes would stick to the rules and reject those blocks.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
adsjohn
|
|
June 26, 2017, 08:22:03 AM |
|
Just 4 months, ten times the previous day, now at the bottom of the valley, through the XCN earned high profits
|
|
|
|
pallas (OP)
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
June 26, 2017, 10:50:58 AM |
|
I've created a poll about the bounty amounts on the slack channel. Come and vote.
|
|
|
|
krnlx
|
|
June 26, 2017, 12:11:22 PM |
|
supprnova pool is unstable - a lot of disconnects -( anyone know how to mine solo, or create a pool? I installed cryptonite wallet, but it seems that it accept miners over old getwork protocol(??) which is deprecated ?
|
|
|
|
pallas (OP)
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
June 26, 2017, 12:13:02 PM |
|
supprnova pool is unstable - a lot of disconnects -( anyone know how to mine solo, or create a pool? I installed cryptonite wallet, but it seems that it accept miners over old getwork protocol(??) which is deprecated ?
you can easily mine solo. creating a pool is not trivial. getwork method is the only one supported by ccminer.
|
|
|
|
krnlx
|
|
June 26, 2017, 12:26:42 PM |
|
supprnova pool is unstable - a lot of disconnects -( anyone know how to mine solo, or create a pool? I installed cryptonite wallet, but it seems that it accept miners over old getwork protocol(??) which is deprecated ?
you can easily mine solo. creating a pool is not trivial. getwork method is the only one supported by ccminer. My conf file: rpcuser=username rpcpassword=password rpcallowip=* rpcport=8252 port=8253 gen=0 server=1 daemon=1 addnode=explorer.cryptonite.info addnode=5.157.115.132 addnode=24.23.220.26 addnode=24.246.60.145 addnode=45.120.112.97 addnode=45.55.155.188 addnode=46.105.118.15 addnode=46.109.38.201 addnode=47.18.185.42 addnode=47.184.199.191 addnode=47.184.226.200 addnode=47.200.219.7 addnode=60.242.6.82 addnode=61.164.253.37 addnode=61.164.253.41 addnode=62.75.210.104 addnode=62.75.241.240 addnode=68.56.121.148 addnode=68.193.116.54 addnode=77.111.163.71 addnode=77.233.244.74 addnode=79.155.232.191 addnode=81.0.115.79 addnode=81.196.22.245 addnode=82.116.52.170 addnode=84.25.101.219 addnode=84.201.247.230 addnode=84.217.19.85 addnode=85.14.250.2 addnode=85.228.176.15 addnode=86.127.154.22 addnode=87.100.232.157 addnode=87.92.62.65 addnode=89.99.27.94 addnode=91.152.122.132 addnode=92.52.46.192 addnode=93.33.170.142 addnode=93.80.161.18 addnode=93.122.250.57 addnode=94.0.121.107 addnode=94.137.33.135 addnode=95.47.105.137 addnode=95.223.11.160 addnode=94.253.215.85 addnode=95.25.80.210 addnode=96.127.136.18 addnode=96.244.98.123 addnode=98.169.196.179 addnode=101.127.169.209 addnode=101.166.130.197 addnode=106.186.126.57 addnode=108.180.78.128 addnode=109.174.57.122 addnode=110.140.110.203 addnode=112.229.90.152 addnode=113.53.148.11 addnode=118.174.153.195 addnode=118.178.139.196 addnode=125.236.224.55 addnode=137.189.91.64 addnode=137.189.91.71 addnode=149.56.20.223 addnode=155.143.193.174 addnode=158.69.27.82 addnode=178.26.208.109 addnode=180.253.248.218 addnode=180.253.249.183 addnode=182.71.181.102 addnode=183.63.48.118 addnode=186.146.145.16 addnode=188.68.159.143 addnode=188.252.239.4 addnode=188.252.239.235 addnode=190.44.84.248 addnode=193.106.171.8 addnode=194.88.107.212 addnode=211.149.194.156 I am getting this on rigs: ./ccminer -a m7 -o 10.0.0.1:8252 -u username -p password ***** ccMiner for nVidia GPUs by djm34 - M7 version ***** based on original ccMiner by Christian Buchner and Christian H. 2014 *** Cuda additions Copyright 2014 Christian Buchner, Christian H. Cuda additions Copyright 2014 DJM34
Fixed for newer cuda versions and cards by pallas BTC donation address: 1H7qC5uHuGX2d5s9Kuw3k7Wm7xMQzL16SN
[2017-06-26 03:40:11] Binding thread 0 to cpu 0 [2017-06-26 03:40:11] Binding thread 2 to cpu 2 [2017-06-26 03:40:11] Binding thread 4 to cpu 4 [2017-06-26 03:40:11] Binding thread 1 to cpu 1 [2017-06-26 03:40:11] Binding thread 3 to cpu 3 [2017-06-26 03:40:11] Binding thread 5 to cpu 5 [2017-06-26 03:40:11] 6 miner threads started, using 'm7' algorithm. [2017-06-26 03:40:12] hex2bin failed on '7.' [2017-06-26 03:40:12] JSON invalid bits [2017-06-26 03:40:12] json_rpc_call failed, retry after 30 seconds ./ccminer -a m7 -o 10.0.0.1:8253 -u username -p password ***** ccMiner for nVidia GPUs by djm34 - M7 version ***** based on original ccMiner by Christian Buchner and Christian H. 2014 *** Cuda additions Copyright 2014 Christian Buchner, Christian H. Cuda additions Copyright 2014 DJM34
Fixed for newer cuda versions and cards by pallas BTC donation address: 1H7qC5uHuGX2d5s9Kuw3k7Wm7xMQzL16SN
[2017-06-26 03:40:01] Binding thread 1 to cpu 1 [2017-06-26 03:40:01] Binding thread 2 to cpu 2 [2017-06-26 03:40:01] Binding thread 4 to cpu 4 [2017-06-26 03:40:01] 6 miner threads started, using 'm7' algorithm. [2017-06-26 03:40:01] Binding thread 5 to cpu 5 [2017-06-26 03:40:01] Binding thread 3 to cpu 3 [2017-06-26 03:40:01] Binding thread 0 to cpu 0 [2017-06-26 03:40:04] HTTP request failed: Empty reply from server [2017-06-26 03:40:04] json_rpc_call failed, retry after 30 seconds Its shame, but i never mined altcoins solo (;
|
|
|
|
pallas (OP)
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
June 26, 2017, 12:42:00 PM |
|
|
|
|
|
alexepp
Newbie
Offline
Activity: 12
Merit: 0
|
|
June 26, 2017, 02:43:29 PM |
|
you can easily mine solo. creating a pool is not trivial. getwork method is the only one supported by ccminer. [/quote]
The speed with which you can start solo?
|
|
|
|
pallas (OP)
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
June 26, 2017, 03:03:32 PM |
|
you can easily mine solo. creating a pool is not trivial. getwork method is the only one supported by ccminer.
The speed with which you can start solo? [/quote] Depends on your tastes but I'd say 1/100 of the network hashrate.
|
|
|
|
alexepp
Newbie
Offline
Activity: 12
Merit: 0
|
|
June 26, 2017, 03:13:01 PM |
|
you can easily mine solo. creating a pool is not trivial. getwork method is the only one supported by ccminer.
The speed with which you can start solo? Depends on your tastes but I'd say 1/100 of the network hashrate. [/quote] Now judging by the pool solo no!
|
|
|
|
nobodywanttocry
Member
Offline
Activity: 126
Merit: 14
|
|
June 26, 2017, 03:16:21 PM |
|
Bter is scam, withdraws not working on any coin
Maybe just in maintaining.
|
|
|
|
nobodywanttocry
Member
Offline
Activity: 126
Merit: 14
|
|
June 26, 2017, 03:18:51 PM |
|
Just 4 months, ten times the previous day, now at the bottom of the valley, through the XCN earned high profits
That's because BTC38.com added XCN-CNY trading .
|
|
|
|
krnlx
|
|
June 26, 2017, 05:16:38 PM |
|
Finally, I found block, but there is an issue with nonce distribution across rigs - it seems, that they are brutforcing against the same nonces cat /cluster/home/krnl/xcn/solo/ccminer-m7-branch/err_f1*|grep acc [2017-06-26 19:43:38] accepted: 0/1 (0.00%), 132617 kh/s NO [2017-06-26 19:43:38] accepted: 0/1 (0.00%), 132632 kh/s NO [2017-06-26 19:43:38] accepted: 0/1 (0.00%), 132470 kh/s NO [2017-06-26 19:43:38] accepted: 0/1 (0.00%), 130971 kh/s NO [2017-06-26 19:43:38] accepted: 1/1 (100.00%), 131068 kh/s YES [2017-06-26 19:43:38] accepted: 0/1 (0.00%), 132805 kh/s NO 6 rigs found solution simultaneously -(
|
|
|
|
pallas (OP)
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
June 26, 2017, 06:17:15 PM |
|
Maybe you could try using --coinbase-sig or --coinbase-addr
EDIT: hmmm not sure they do anything on getwork.
|
|
|
|
robo2
Newbie
Offline
Activity: 56
Merit: 0
|
|
June 27, 2017, 08:08:59 AM |
|
any windows wersion of new wallet?
|
|
|
|
pallas (OP)
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
June 27, 2017, 08:15:36 AM |
|
any windows wersion of new wallet?
the windows build available on the site should be up to date with github.
|
|
|
|
DLGHT
Newbie
Offline
Activity: 35
Merit: 0
|
|
June 27, 2017, 11:24:34 AM Last edit: June 27, 2017, 11:37:07 AM by DLGHT |
|
Hi Pallas, George and everyone here.
So I just got this free subscription on Azure. and I decided to whip up a instance with 4 K80 GPUs (2 per card). It had 4992 cores, 5000MHz memspeed, and 480 GB/s bandwidth, 24GB video memory on each card. I just wanted to determine what they will give.
But I am shocked I am getting less than 24MH/s. Each GPU die is more powerful than a 1070 (in all the numbers), so I should have at least 40MH/s (even the worst 1070 here gave 10MH/s)
How can I optimise that? What I am not getting right?
The card is Compute 3.7 and I am using djm34 CUDA miner on Windows.
Thanks for all your help.
EDIT: OR does it have anything to do with setting the vardiff on Suprnova
|
|
|
|
pallas (OP)
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
June 27, 2017, 11:45:45 AM |
|
Hi Pallas, George and everyone here.
So I just got this free subscription on Azure. and I decided to whip up a instance with 4 K80 GPUs (2 per card). It had 4992 cores, 5000MHz memspeed, and 480 GB/s bandwidth, 24GB video memory on each card. I just wanted to determine what they will give.
But I am shocked I am getting less than 24MH/s. Each GPU die is more powerful than a 1070 (in all the numbers), so I should have at least 40MH/s (even the worst 1070 here gave 10MH/s)
How can I optimise that? What I am not getting right?
The card is Compute 3.7 and I am using djm34 CUDA miner on Windows.
Thanks for all your help.
EDIT: OR does it have anything to do with setting the vardiff on Suprnova
It is an old architecture, also probably lower core clock (memclock matters very little). When they will update to pascal based cards it might be interesting to try cloud gpu mining.
|
|
|
|
DLGHT
Newbie
Offline
Activity: 35
Merit: 0
|
|
June 27, 2017, 12:08:31 PM |
|
Hi Pallas, George and everyone here.
So I just got this free subscription on Azure. and I decided to whip up a instance with 4 K80 GPUs (2 per card). It had 4992 cores, 5000MHz memspeed, and 480 GB/s bandwidth, 24GB video memory on each card. I just wanted to determine what they will give.
But I am shocked I am getting less than 24MH/s. Each GPU die is more powerful than a 1070 (in all the numbers), so I should have at least 40MH/s (even the worst 1070 here gave 10MH/s)
How can I optimise that? What I am not getting right?
The card is Compute 3.7 and I am using djm34 CUDA miner on Windows.
Thanks for all your help.
EDIT: OR does it have anything to do with setting the vardiff on Suprnova
It is an old architecture, also probably lower core clock (memclock matters very little). When they will update to pascal based cards it might be interesting to try cloud gpu mining. Thank you for your reply. core clock is 875MHz and I set it on max.
|
|
|
|
pallas (OP)
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
June 27, 2017, 12:47:37 PM |
|
Hi Pallas, George and everyone here.
So I just got this free subscription on Azure. and I decided to whip up a instance with 4 K80 GPUs (2 per card). It had 4992 cores, 5000MHz memspeed, and 480 GB/s bandwidth, 24GB video memory on each card. I just wanted to determine what they will give.
But I am shocked I am getting less than 24MH/s. Each GPU die is more powerful than a 1070 (in all the numbers), so I should have at least 40MH/s (even the worst 1070 here gave 10MH/s)
How can I optimise that? What I am not getting right?
The card is Compute 3.7 and I am using djm34 CUDA miner on Windows.
Thanks for all your help.
EDIT: OR does it have anything to do with setting the vardiff on Suprnova
It is an old architecture, also probably lower core clock (memclock matters very little). When they will update to pascal based cards it might be interesting to try cloud gpu mining. Thank you for your reply. core clock is 875MHz and I set it on max. the 1070 runs at double that :-)
|
|
|
|
|