Liquid Synergy Designs Inc. -ASIC mining hardware

[cardcomm]

BKKCoins is OK! He was in a motorcycle accident and is lucky to be alive: https://bitcointalk.org/index.php?topic=190731.msg3649002#msg3649002

As for all of you clamouring for Steamboat's blood: give it a rest, already. Did you not read the GIANT BOLD DISCLAIMER warning prospective buyers that this project carries a high level of risk and has many factors outside of Steamboat's control?

RISK, yes. Unfulfilled promises and habitual neglect of customers is NOT beyond his control.

BTW, great news that BkkCoins will hopefully have a full recovery.  HE is an example of a person who didn't communication for reasons that were TRUELY beyond his control.

See the difference there?

[cardcomm]

Steamboat IS working an update & info on the hosting.Not sure when,but he is gonna do it soon .

I saw him tonite,he said the update is being compiled as of this moment 

He's not going anywhere,just trying to figure the best solution for everyone!!!!! 

I know people are sick of me posting here. I mean this as no dis-respect to you personally "Unacceptable". I really do appreciate your update. Thanks.

But you might want to google the phrase "real soon now". Also note the acronym RSN.

[Unacceptable]

Steamboat IS working an update & info on the hosting.Not sure when,but he is gonna do it soon .

I saw him tonite,he said the update is being compiled as of this moment 

He's not going anywhere,just trying to figure the best solution for everyone!!!!! 

I know people are sick of me posting here. I mean this as no dis-respect to you personally "Unacceptable". I really do appreciate your update. Thanks.

But you might want to google the phrase "real soon now". Also note the acronym RSN.

   Whatever 

[randoint]

Regarding the non-hashing or zombie units - Still using cgminer 3.7.0, I have clocked them back to 300 mhz per unit and still there would be 1-2 non hashing units that would creep up after a few minutes from initialization. The units that stop hashing are physically random (eg: first run unit 9 and 11 would stop; or second run unit 2 and 8 would stop and so forth).

edit:
I've noticed that the unit goes bad due to a usb write error. Don't know if anything came across this usb issue?

https://i.imgur.com/5UtKhyD.png

Perhaps if there is someone who is running these units with no issues, are you using a usb hub? I'm thinking the hub might be the culprit. Using Dlink 7 port usb 2.0 hub > 5 units per hub.

[Unacceptable]

Regarding the non-hashing or zombie units - Still using cgminer 3.7.0, I have clocked them back to 300 mhz per unit and still there would be 1-2 non hashing units that would creep up after a few minutes from initialization. The units that stop hashing are physically random (eg: first run unit 9 and 11 would stop; or second run unit 2 and 8 would stop and so forth).

edit:
I've noticed that the unit goes bad due to a usb write error. Don't know if anything came across this usb issue?



Perhaps if there is someone who is running these units with no issues, are you using a usb hub? I'm thinking the hub might be the culprit. Using Dlink 7 port usb 2.0 hub > 5 units per hub.

I use this hub:

Tek Republic TUH-2700 USB 2.0 7 Port Hub with Power
http://www.newegg.com/Product/Product.aspx?Item=N82E16817659004

I have one unit that did go zombie or just showed mhs instead of gh,just moved it around to another USB port & another 6pin cable.It hasn't acted up since.

Those same cables are on another miner & it works fine.................No rhyme or reason here,all my power & USB cables are the same,very strange...................

[cardcomm]

I just noticed this jewel of a quote on Steamboat's profile: "Those who serve best, profit most."

Huh. I wonder what he means by that?

[Kapz786]

I just noticed this jewel of a quote on Steamboat's profile: "Those who serve best, profit most."

Huh. I wonder what he means by that?

Im with ya cardcomm - sick of his cronies defending him - his updates were every few days when he needed our money

[Bakal]

steamboat, can you please process our refunds. im a patient man, but keeping us in the dark is very unprofessional. you are starting to be like y i fu. we are not asking for a 20 paragraph update. all we ask is a clear straight to the point update. since there is no update. i am asking you to please process my refund for this thing that i joined. thank you.

[ScaryHash]

Regarding the non-hashing or zombie units - Still using cgminer 3.7.0, I have clocked them back to 300 mhz per unit and still there would be 1-2 non hashing units that would creep up after a few minutes from initialization. The units that stop hashing are physically random (eg: first run unit 9 and 11 would stop; or second run unit 2 and 8 would stop and so forth).

edit:
I've noticed that the unit goes bad due to a usb write error. Don't know if anything came across this usb issue?



Perhaps if there is someone who is running these units with no issues, are you using a usb hub? I'm thinking the hub might be the culprit. Using Dlink 7 port usb 2.0 hub > 5 units per hub.

I use this hub:

Tek Republic TUH-2700 USB 2.0 7 Port Hub with Power
http://www.newegg.com/Product/Product.aspx?Item=N82E16817659004

I have one unit that did go zombie or just showed mhs instead of gh,just moved it around to another USB port & another 6pin cable.It hasn't acted up since.

Those same cables are on another miner & it works fine.................No rhyme or reason here,all my power & USB cables are the same,very strange...................

I have a Belkin 7 port USB 2.0 Hub with 7 miners on it.

I tried my Anker 3.0 hubs and they just do not work at all.

Yes, there seems to be no rhYme or reason to the USB errors. I get a Libusb error after a while when I power-cycle and unplug the miners that do not seem to be hashing. Usually after Libusb hits miner 57 or more.

As I unplug them, and plug them in again, to try to get them to hash, the KLN number keeps climbing. Eventually, I get a USB error, and I have to reboot the mining computer. It seems you get these errors on Linux too.

There is some sort of USB limitation. Might depend on the motherboard (no idea here). But, I'm only running 10 miners on the Unix machine. I have not tried additional usb hubs on it, because frankly, it's a HUGE pain in the behind to power cycle them to make them all work. But, such is the price of...err...BTC.

Not all of mine are hashing at full power, all of the time. It is highly annoying. But, right now I'm running on 8 out of 10 on full power, and 2 seem to be running half bank.

Well, at least they are running. Knock on wood.

[Duetschpire]

WTS 5 x K16 miners on cryptothrift

[1life]

haha another company that fucks over customers.. yup keep sending your money folks for unfinished products you greedy wanna get rich overnight fucks

[Geode]

If none of you are getting any communication from him, have you considered asking John K. (https://bitcointalk.org/index.php?action=profile;u=31288) for Steamboat's contact information? You can then forward the information to the local police department or the FBI to launch an investigation through their Internet Crime Complaint Center:

Internet Crime Complaint Center (FBI)

http://www.ic3.gov/default.aspx

http://www.fbi.gov/contact-us/

[Unacceptable]

Regarding the non-hashing or zombie units - Still using cgminer 3.7.0, I have clocked them back to 300 mhz per unit and still there would be 1-2 non hashing units that would creep up after a few minutes from initialization. The units that stop hashing are physically random (eg: first run unit 9 and 11 would stop; or second run unit 2 and 8 would stop and so forth).

edit:
I've noticed that the unit goes bad due to a usb write error. Don't know if anything came across this usb issue?



Perhaps if there is someone who is running these units with no issues, are you using a usb hub? I'm thinking the hub might be the culprit. Using Dlink 7 port usb 2.0 hub > 5 units per hub.

I use this hub:

Tek Republic TUH-2700 USB 2.0 7 Port Hub with Power
http://www.newegg.com/Product/Product.aspx?Item=N82E16817659004

I have one unit that did go zombie or just showed mhs instead of gh,just moved it around to another USB port & another 6pin cable.It hasn't acted up since.

Those same cables are on another miner & it works fine.................No rhyme or reason here,all my power & USB cables are the same,very strange...................

I have a Belkin 7 port USB 2.0 Hub with 7 miners on it.

I tried my Anker 3.0 hubs and they just do not work at all.

Yes, there seems to be no rhYme or reason to the USB errors. I get a Libusb error after a while when I power-cycle and unplug the miners that do not seem to be hashing. Usually after Libusb hits miner 57 or more.

As I unplug them, and plug them in again, to try to get them to hash, the KLN number keeps climbing. Eventually, I get a USB error, and I have to reboot the mining computer. It seems you get these errors on Linux too.

There is some sort of USB limitation. Might depend on the motherboard (no idea here). But, I'm only running 10 miners on the Unix machine. I have not tried additional usb hubs on it, because frankly, it's a HUGE pain in the behind to power cycle them to make them all work. But, such is the price of...err...BTC.

Not all of mine are hashing at full power, all of the time. It is highly annoying. But, right now I'm running on 8 out of 10 on full power, and 2 seem to be running half bank.

Well, at least they are running. Knock on wood.

Oh,BTW,I'm on win7 64 running just a bat file  No compiling or config file.............

[QualitySeeds]

Hi guys question for u

is this product final does it work ?

(want to make my own)

[Foaz]

Steamboat IS working on an update & info on the hosting.Not sure when,but he is gonna do it soon .

I saw him tonite,he said the update is being compiled as of this moment  

He's not going anywhere,just trying to figure the best solution for everyone!!!!!  

Guess he's facing the current difficulty level.

*ba-dum ts*

[cp1]

Hi guys question for u

is this product final does it work ?

(want to make my own)

Yes, there were some changes from the original design though.

[rammy2k2]

ANY NEWS FOR THIS PRODUCT ? i paid so long ago ...

[Keefe]

I have 8 of these miners for sale, 0.15 BTC each. I'm currently running 4 of them at 5.6 GH/s each (350mhz), and the other 4 are still new in box. PM me with questions.

[rammy2k2]

I have 8 of these miners for sale, 0.15 BTC each. I'm currently running 4 of them at 5.6 GH/s each (350mhz), and the other 4 are still new in box. PM me with questions.

how the heck did u get them ? i didnt received no email .. no nothing ...

[chadtn]

I have 8 of these miners for sale, 0.15 BTC each. I'm currently running 4 of them at 5.6 GH/s each (350mhz), and the other 4 are still new in box. PM me with questions.

how the heck did u get them ? i didnt received no email .. no nothing ...

You have to e-mail Steamboat and tell him to ship them with the most recent firmware available.  The USB bootloader and I2C chaining are currently nonfunctional.  Each K16 will require a USB port and if you want to change the firmware on the board you will need to buy a Pickit3 programmer.  In their current form they are perfectly functional.  The only thing I can really gripe about is if you use the PWM fan connector on the board you will have to disconnect/reconnect it every time you power cycle the unit.  If you use the included molex 12V connector I don't believe this is an issue.

Chad