massnerder
Sr. Member
Offline
Activity: 308
Merit: 250
No power in the 'verse can stop me.
|
|
August 05, 2013, 09:09:32 PM |
|
*grabs pitchfork* yea! damn them! while we are still waiting on chips, hope TH caught this: NOTICE:
There is an error in the K16 Parts List on Github.
R47 is marked as 0603 package but the board requires an 0402 package.
This is a 100 ohm resistor. Qty 6 should be reduced to Qty 5 and an 0402 Qty 1 added.
I've fixed the error in the parts list but if you have ordered 0603 resistors for production you will need to also order some 0402 of the same. For DIY hand assembly you may be able to fit an 0603 in as a hack. I'll update later as I see how this works out.
Sorry everyone. I thought all the errors had been caught some time ago but this one slipped in as part of the last revision.
It's fairly minor in comparison to the ASICs that never ship, but it's a nuisance, I know.
|
|
|
|
MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
August 05, 2013, 09:26:27 PM |
|
*grabs pitchfork* yea! damn them! while we are still waiting on chips, hope TH caught this: NOTICE:
There is an error in the K16 Parts List on Github.
R47 is marked as 0603 package but the board requires an 0402 package.
This is a 100 ohm resistor. Qty 6 should be reduced to Qty 5 and an 0402 Qty 1 added.
I've fixed the error in the parts list but if you have ordered 0603 resistors for production you will need to also order some 0402 of the same. For DIY hand assembly you may be able to fit an 0603 in as a hack. I'll update later as I see how this works out.
Sorry everyone. I thought all the errors had been caught some time ago but this one slipped in as part of the last revision.
It's fairly minor in comparison to the ASICs that never ship, but it's a nuisance, I know.
interesting
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
August 05, 2013, 09:52:17 PM |
|
Hey gang, (KL and S.gent) thx for the info on canary....super prices! and he sure seems solid with trust! Now if i can just figure out how to send and sign etc,,,lol, but its all there I just need to study his thread again, can't be that hard How to sign,post # 410,if the link does not take you to it: https://bitcointalk.org/index.php?topic=195052.msg2087551#msg2087551Just change the body of the letter to state what you want,its a great example The bitcoin address you sent the payment from is ANY address you RECIEVE BTC with to YOUR wallet Just copy & paste the 3 fields in an email or PM & your done!!!! Hey I just read through that..its a good example. I may have a question still about this part: where am I generating this address from? In line 1 - enter the bitcoin address you sent the payment fromI that my address for payment to canary (his receive address) ? Ill look at it more later got to go get supper for me and my son... thx Unacceptable,,,great link! EDIT: I think I just saw my answer in your post,,,that address would be any receive address generated in my own wallet,,,same as if i was generating an address for receiving payment from a pool etc... Exactly I use the addy from my pool,which I've used since June 2011.It's been a steady addy & is easy to find in my wallet & on my pool account page No problem,I was confused as hell till I found that guys post its becoming clearer...lol, thx again man! so you just use the same address over and over for receive coin,,,for the signature part? (line 1) when signing... the address you use for the signature should be the address you sent coin from (you need to check the block change transaction to get the address use http://blockchain.info/ or http://blockexplorer.com/) enter you transaction id in the search and you will find the address ( or addresses, use either one) e.g. my transaction id was ---- fc3180a4cc196558890bb5e884685464c2d27980beca322bf1f1cfd4dbebdaf9 this returns with my address >>>>>>>>>> 1DononEbNw8traGfgQpvkV99tRPkat8H7t and that is the address to sign with.. Try it with my transaction then do the same for yours OK, I think I got it,,,lol, For example: I went to my wallet and looked at a sent transaction to coinbase. I right clicked on that CB transaction and hit "show transaction details". I Copied and pasted that long "Transaction ID" number. I Pasted that ID number in the Bitcoin Block Exploxer Search window and searched. IT went to a page with a heading "Transactions" It Displayed a box with a "From Address" and to the left of it it showed the amount of BTC I had sent to CB in that transaction. So, is the address in the "From Address" box, my address and is that what I would paste in LINE 1 of the signature box window? Then of course fill in the info for my mailing address etc. Ok, I think I have it now please correct me if im still not getting it... I just think Im having brain farts here,,,comes with age It is confusing,until you do it once Open notepad: 1.Go to your "receive coins" button,click it,copy & paste that addy in notepad.This is YOUR wallet addy,any BTC sent to it will end up in your wallet & no one else's. I only have one receive addy,if you have more than one...........I don't think it matters,just pick one. Someone correct me if I'm wrong2.Now,go to "transactions" button,click it, find the transaction you want to sign,right click on it & click on "show details".Copy & paste the "Transaction ID" in notepad. 3.Your ready to sign a message,go to "file",upper left corner,click it & click "sign message". 4.Copy & paste YOUR wallet addy in line 1.........In the body copy & paste the "Transaction ID".Put your info in there too,what the BTC was sent for & how much (EXACT amount),name,shipping address,etc... 5.Click "sign message" on the bottom,it will generate a unique ID #.Now copy & paste the info from all 3 sections in an email or PM,keep them seperate in the email (don't just bunch em together) & volia!!!! You just signed a message
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
southerngentuk
Sr. Member
Offline
Activity: 1316
Merit: 254
Sugars.zone | DatingFi - Earn for Posting
|
|
August 05, 2013, 10:33:19 PM |
|
Open notepad: 1.Go to your "receive coins" button,click it,copy & paste that addy in notepad.This is YOUR wallet addy,any BTC sent to it will end up in your wallet & no one else's. I only have one receive addy,if you have more than one...........I don't think it matters,just pick one. Someone correct me if I'm wrong2.Now,go to "transactions" button,click it, find the transaction you want to sign,right click on it & click on "show details".Copy & paste the "Transaction ID" in notepad. 3.Your ready to sign a message,go to "file",upper left corner,click it & click "sign message". 4.Copy & paste YOUR wallet addy in line 1.........In the body copy & paste the "Transaction ID".Put your info in there too,what the BTC was sent for & how much (EXACT amount),name,shipping address,etc... 5.Click "sign message" on the bottom,it will generate a unique ID #.Now copy & paste the info from all 3 sections in an email or PM,keep them seperate in the email (don't just bunch em together) & volia!!!! You just signed a message point 1.. This worked for me the first time, then I looked an ass , always double check the blockchain after sending a transaction to confirm your address before signing an message, It wasted so much time for group buys chasing payments.. if you think you have got it, you can do this in reverse. VERIFY A MESSAGE Address : 1DononEbNw8traGfgQpvkV99tRPkat8H7t start message----------- This is the message southerngent signed. end message------------ Signature : HCjjSUOpvoK7HkSvwqc687hHiLwfw8GEaV2wmNuAg8ErQ6Mb58JAhFtuyC9OonjUm9nBs5kbilaaxWc 8Nff4c7Y= Try it.. then when you have signed a message you can verify it. Only you can sign a message with your address but anyone can verify it..
|
SUGAR | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | | | | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | ███████████████████████████ ███████████████████████████ ██████ ██████ ██████ ▄████▀ ██████ ██████▄▄▄███▀ ▄█ ██████ ██████████▀ ▄███ ██████ ████████▀ ▄█████▄▄▄██████ ██████▀ ▄███████▀▀▀██████ ██████ ▀▀▀▀▀▀▀▀▀ ██████ ██████ ██████ ███████████████████████████ ███████████████████████████ | . Backed By ZetaChain | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | |
|
|
|
bebfoo
Member
Offline
Activity: 60
Merit: 10
|
|
August 05, 2013, 11:20:30 PM |
|
Open notepad: 1.Go to your "receive coins" button,click it,copy & paste that addy in notepad.This is YOUR wallet addy,any BTC sent to it will end up in your wallet & no one else's. I only have one receive addy,if you have more than one...........I don't think it matters,just pick one. Someone correct me if I'm wrong2.Now,go to "transactions" button,click it, find the transaction you want to sign,right click on it & click on "show details".Copy & paste the "Transaction ID" in notepad. 3.Your ready to sign a message,go to "file",upper left corner,click it & click "sign message". 4.Copy & paste YOUR wallet addy in line 1.........In the body copy & paste the "Transaction ID".Put your info in there too,what the BTC was sent for & how much (EXACT amount),name,shipping address,etc... 5.Click "sign message" on the bottom,it will generate a unique ID #.Now copy & paste the info from all 3 sections in an email or PM,keep them seperate in the email (don't just bunch em together) & volia!!!! You just signed a message point 1.. This worked for me the first time, then I looked an ass , always double check the blockchain after sending a transaction to confirm your address before signing an message, It wasted so much time for group buys chasing payments.. if you think you have got it, you can do this in reverse. VERIFY A MESSAGE Address : 1DononEbNw8traGfgQpvkV99tRPkat8H7t start message----------- This is the message southerngent signed. end message------------ Signature : HCjjSUOpvoK7HkSvwqc687hHiLwfw8GEaV2wmNuAg8ErQ6Mb58JAhFtuyC9OonjUm9nBs5kbilaaxWc 8Nff4c7Y= Try it.. then when you have signed a message you can verify it. Only you can sign a message with your address but anyone can verify it.. What does any of this have to do with Terrahash??
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
August 05, 2013, 11:24:17 PM |
|
What does any of this have to do with Terrahash??
Nothing,I guess He wanted to know how to sign,I figured I'd help him & maybe a few others
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
southerngentuk
Sr. Member
Offline
Activity: 1316
Merit: 254
Sugars.zone | DatingFi - Earn for Posting
|
|
August 05, 2013, 11:25:55 PM |
|
Open notepad: 1.Go to your "receive coins" button,click it,copy & paste that addy in notepad.This is YOUR wallet addy,any BTC sent to it will end up in your wallet & no one else's. I only have one receive addy,if you have more than one...........I don't think it matters,just pick one. Someone correct me if I'm wrong2.Now,go to "transactions" button,click it, find the transaction you want to sign,right click on it & click on "show details".Copy & paste the "Transaction ID" in notepad. 3.Your ready to sign a message,go to "file",upper left corner,click it & click "sign message". 4.Copy & paste YOUR wallet addy in line 1.........In the body copy & paste the "Transaction ID".Put your info in there too,what the BTC was sent for & how much (EXACT amount),name,shipping address,etc... 5.Click "sign message" on the bottom,it will generate a unique ID #.Now copy & paste the info from all 3 sections in an email or PM,keep them seperate in the email (don't just bunch em together) & volia!!!! You just signed a message point 1.. This worked for me the first time, then I looked an ass , always double check the blockchain after sending a transaction to confirm your address before signing an message, It wasted so much time for group buys chasing payments.. if you think you have got it, you can do this in reverse. VERIFY A MESSAGE Address : 1DononEbNw8traGfgQpvkV99tRPkat8H7t start message----------- This is the message southerngent signed. end message------------ Signature : HCjjSUOpvoK7HkSvwqc687hHiLwfw8GEaV2wmNuAg8ErQ6Mb58JAhFtuyC9OonjUm9nBs5kbilaaxWc 8Nff4c7Y= Try it.. then when you have signed a message you can verify it. Only you can sign a message with your address but anyone can verify it.. What does any of this have to do with Terrahash?? Your right, Nothing,Its just helping people out, off topic i know... However there`s nothing else going on here for a longgg while so I think its ok
|
SUGAR | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | | | | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | ███████████████████████████ ███████████████████████████ ██████ ██████ ██████ ▄████▀ ██████ ██████▄▄▄███▀ ▄█ ██████ ██████████▀ ▄███ ██████ ████████▀ ▄█████▄▄▄██████ ██████▀ ▄███████▀▀▀██████ ██████ ▀▀▀▀▀▀▀▀▀ ██████ ██████ ██████ ███████████████████████████ ███████████████████████████ | . Backed By ZetaChain | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | | ██ ██
██ ██
██ ██
██ ██
██ ██
██ ██ | | | |
|
|
|
zurg
|
|
August 06, 2013, 12:32:09 AM |
|
*grabs pitchfork* yea! damn them! while we are still waiting on chips, hope TH caught this: NOTICE:
There is an error in the K16 Parts List on Github.
R47 is marked as 0603 package but the board requires an 0402 package.
This is a 100 ohm resistor. Qty 6 should be reduced to Qty 5 and an 0402 Qty 1 added.
I've fixed the error in the parts list but if you have ordered 0603 resistors for production you will need to also order some 0402 of the same. For DIY hand assembly you may be able to fit an 0603 in as a hack. I'll update later as I see how this works out.
Sorry everyone. I thought all the errors had been caught some time ago but this one slipped in as part of the last revision.
It's fairly minor in comparison to the ASICs that never ship, but it's a nuisance, I know.
Yea, already ordered the new part. We have ordered enough components to assemble upto 200,000 chips or 12,500 K16s. The only part in shortage right now is the PIC. But, we have enough of them for 40,000 chips and more are coming in around August 15. Heatsinks will be here next week. The cases were supposed to arrive today, but the shop says they are delayed by a couple days, which is fine for now. Power supplies and fans (for the cases) have been ordered as well. Cable harnesses for powering upto 40 K16s from a single power supply have been custom made, they will be here by next week too. And Avalon chips are still MIA.
|
|
|
|
MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
August 06, 2013, 12:35:04 AM |
|
*grabs pitchfork* yea! damn them! while we are still waiting on chips, hope TH caught this: NOTICE:
There is an error in the K16 Parts List on Github.
R47 is marked as 0603 package but the board requires an 0402 package.
This is a 100 ohm resistor. Qty 6 should be reduced to Qty 5 and an 0402 Qty 1 added.
I've fixed the error in the parts list but if you have ordered 0603 resistors for production you will need to also order some 0402 of the same. For DIY hand assembly you may be able to fit an 0603 in as a hack. I'll update later as I see how this works out.
Sorry everyone. I thought all the errors had been caught some time ago but this one slipped in as part of the last revision.
It's fairly minor in comparison to the ASICs that never ship, but it's a nuisance, I know.
Yea, already ordered the new part. We have ordered enough components to assemble upto 200,000 chips or 12,500 K16s. The only part in shortage right now is the PIC. But, we have enough of them for 40,000 chips and more are coming in around August 15. Heatsinks will be here next week. The cases were supposed to arrive today, but the shop says they are delayed by a couple days, which is fine for now. Power supplies and fans (for the cases) have been ordered as well. Cable harnesses for powering upto 40 K16s from a single power supply have been custom made, they will be here by next week too. Sounds good! Keep at it THX for the update guys!
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
August 06, 2013, 12:37:56 AM |
|
Open notepad: 1.Go to your "receive coins" button,click it,copy & paste that addy in notepad.This is YOUR wallet addy,any BTC sent to it will end up in your wallet & no one else's. I only have one receive addy,if you have more than one...........I don't think it matters,just pick one. Someone correct me if I'm wrong2.Now,go to "transactions" button,click it, find the transaction you want to sign,right click on it & click on "show details".Copy & paste the "Transaction ID" in notepad. 3.Your ready to sign a message,go to "file",upper left corner,click it & click "sign message". 4.Copy & paste YOUR wallet addy in line 1.........In the body copy & paste the "Transaction ID".Put your info in there too,what the BTC was sent for & how much (EXACT amount),name,shipping address,etc... 5.Click "sign message" on the bottom,it will generate a unique ID #.Now copy & paste the info from all 3 sections in an email or PM,keep them seperate in the email (don't just bunch em together) & volia!!!! You just signed a message point 1.. This worked for me the first time, then I looked an ass , always double check the blockchain after sending a transaction to confirm your address before signing an message, It wasted so much time for group buys chasing payments.. if you think you have got it, you can do this in reverse. VERIFY A MESSAGE Address : 1DononEbNw8traGfgQpvkV99tRPkat8H7t start message----------- This is the message southerngent signed. end message------------ Signature : HCjjSUOpvoK7HkSvwqc687hHiLwfw8GEaV2wmNuAg8ErQ6Mb58JAhFtuyC9OonjUm9nBs5kbilaaxWc 8Nff4c7Y= Try it.. then when you have signed a message you can verify it. Only you can sign a message with your address but anyone can verify it.. What does any of this have to do with Terrahash?? Get over it befo
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
August 06, 2013, 12:42:05 AM |
|
Open notepad: 1.Go to your "receive coins" button,click it,copy & paste that addy in notepad.This is YOUR wallet addy,any BTC sent to it will end up in your wallet & no one else's. I only have one receive addy,if you have more than one...........I don't think it matters,just pick one. Someone correct me if I'm wrong2.Now,go to "transactions" button,click it, find the transaction you want to sign,right click on it & click on "show details".Copy & paste the "Transaction ID" in notepad. 3.Your ready to sign a message,go to "file",upper left corner,click it & click "sign message". 4.Copy & paste YOUR wallet addy in line 1.........In the body copy & paste the "Transaction ID".Put your info in there too,what the BTC was sent for & how much (EXACT amount),name,shipping address,etc... 5.Click "sign message" on the bottom,it will generate a unique ID #.Now copy & paste the info from all 3 sections in an email or PM,keep them seperate in the email (don't just bunch em together) & volia!!!! You just signed a message point 1.. This worked for me the first time, then I looked an ass , always double check the blockchain after sending a transaction to confirm your address before signing an message, It wasted so much time for group buys chasing payments.. if you think you have got it, you can do this in reverse. VERIFY A MESSAGE Address : 1DononEbNw8traGfgQpvkV99tRPkat8H7t start message----------- This is the message southerngent signed. end message------------ Signature : HCjjSUOpvoK7HkSvwqc687hHiLwfw8GEaV2wmNuAg8ErQ6Mb58JAhFtuyC9OonjUm9nBs5kbilaaxWc 8Nff4c7Y= Try it.. then when you have signed a message you can verify it. Only you can sign a message with your address but anyone can verify it.. What does any of this have to do with Terrahash?? Your right, Nothing,Its just helping people out, off topic i know... However there`s nothing else going on here for a longgg while so I think its ok Hey this is great info...and don't pay no mind to bebfo...this forum has slowley evolved a little into a nice forum where intellegent people are sharing knowledge. Instead of a gripe forum all the time. People will really want to share things once we get our klondikes! THx again,,,the signing is looking good. And bebfo is hardly ever on in here so don't know what he is bitching about anyways?
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
BkkCoins
|
|
August 06, 2013, 12:54:31 AM |
|
Thank You terrahash!
I just wanted to publicly Thank You for making a substantial license payment to me for the boards you have under way. I thought it would be good for your customers to know that you have been taking the steps to make this "officially endorsed". If you ever need my assistance I'm always here.
|
|
|
|
erk
|
|
August 06, 2013, 12:56:10 AM |
|
Thank You terrahash!
I just wanted to publicly Thank You for making a substantial license payment to me for the boards you have under way. I thought it would be good for your customers to know that you have been taking the steps to make this "officially endorsed". If you ever need my assistance I'm always here.
Thanks for putting in the hours!
|
|
|
|
jc328
Member
Offline
Activity: 92
Merit: 10
|
|
August 06, 2013, 12:57:57 AM |
|
Thank You terrahash!
I just wanted to publicly Thank You for making a substantial license payment to me for the boards you have under way. I thought it would be good for your customers to know that you have been taking the steps to make this "officially endorsed". If you ever need my assistance I'm always here.
Great Job Fellas! Glad to see the hard working folks from all angles of this project are getting compensated. -JC
|
|
|
|
MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
August 06, 2013, 01:25:01 AM |
|
Thank You terrahash!
I just wanted to publicly Thank You for making a substantial license payment to me for the boards you have under way. I thought it would be good for your customers to know that you have been taking the steps to make this "officially endorsed". If you ever need my assistance I'm always here.
Hey BKK! Welcome to our little thread here,,,,Thanks for dropping in and sharing that with us,,your work has been remarkable! and it seems Terrahash has been pulling their weight as well, Good luck with everything!
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
MinermanNC
Legendary
Offline
Activity: 2198
Merit: 1000
|
|
August 06, 2013, 01:30:33 AM |
|
WOW! I do feel a little priveledged to be in in the same thread with Terrahash and BKKcoins in here and online! WOOT!
|
*BTC: 1DiR25SPo84sThzTATr27EZEQZLt6hv6tG
|
|
|
zurg
|
|
August 06, 2013, 01:39:35 AM |
|
Can someone cross-check this. I am on the phone. On twitter : Bargain! 140 Avalon ASIC chips from SebastianJu, batch#3 @ initial price 0.086 * https://bitcointalk.org/index.php?topic=268625 #bitcoin He is selling Avalon chips ordered on 23rd of May. Am I missing something? Not in hand. Nevermind. I was gonna say. Lol
|
|
|
|
-Redacted-
|
|
August 06, 2013, 01:41:59 AM |
|
Yes, you are buying chips from his group buy. They are not in hand. SebastianJu endorses.
|
|
|
|
kkooks
Member
Offline
Activity: 98
Merit: 10
|
|
August 06, 2013, 02:07:17 AM |
|
Terrahash! Pick these up! All of them. Yes, you are buying chips from his group buy. They are not in hand. SebastianJu endorses.
|
Donate BTC: 1MLYhqB3kdeiAa291oPMWETMs6FPn8Bzzz
|
|
|
-Redacted-
|
|
August 06, 2013, 02:10:21 AM |
|
Terrahash! Pick these up! All of them.
Terahash already has 20k chips on order from early May.
|
|
|
|
|