mantor84
Member
Offline
Activity: 63
Merit: 10
|
|
August 03, 2017, 11:17:31 AM |
|
hey guys I'm a bit confused.
I've ordered 1x D3+ PSU and paid via BTC directly after I got Bitmains' BTC address.
my current order status is "Paid" but also "Expired" ? Does it mean I was to late? Don't know how I could pay faster lol
Conntacted the support already but wanted to know if anyone of you got the same issue. In worst case I don't get the D3 miner will I receive my full BTC back from Bitmain?
Any experience with that?
|
|
|
|
thiec
|
|
August 03, 2017, 11:21:33 AM |
|
I bet only 10% of the people actually plan on buying these. Stock will come up again, as most people dont even plan on paying for these. Dont waste your money paying people for their accounts for the "right to buy" one. Bitmain has an issue on their hands and its hurting their sales and people are gonna get pissed soon. No problem with people spending their money or btc then offering their presale but people are taking all the stock and not even planning to pay....its almost comical
But, are they people listen? With limited stock and over demand, there will be such issue like selling account opportunity. Bitmain should not give a right to change the shipment address or just put as much as demand need to get rid of this issue
|
|
|
|
draqsoru
Newbie
Offline
Activity: 9
Merit: 0
|
|
August 03, 2017, 11:22:52 AM |
|
my current order status is "Paid" but also "Expired" ? Does it mean I was to late? Don't know how I could pay faster lol
Any experience with that?
manually changed into valid
|
|
|
|
Ryancope123
|
|
August 03, 2017, 11:25:38 AM |
|
sold out already ! haha
I bought 3 but didnt even check the date they will be dispatched, what're peoples thoughts with regards to mining with these?
I am new to DASH, what's the best route, direct to mine DASH or use nice hash and convert to BTC.
Currently, have 1 l3+
Not sold out yet. so this batch is slowest to roll it seems, may be due to increase in difficulty, So does one month difference makes all the difference here? Yes, they are sold-out now. Why is it when I try to do this same deal 1 entire day prior to this guy I get called a scammer and he gets praised for being greedy and quick to pull the trigger exactly like I did? Wtf what deal? I think he mean this: https://bitcointalk.org/index.php?topic=2060485.0 Not quite sure what the guy meant? i have bought the 3 for me, direct from bitmain :S not selling them... ?
|
|
|
|
shaninium
|
|
August 03, 2017, 11:29:36 AM |
|
Bitmain should lock one delivery address per account AFTER order has been made and not allow new user accounts to change phone number.
|
|
|
|
wheelz1200
Legendary
Offline
Activity: 3780
Merit: 1418
|
|
August 03, 2017, 11:34:51 AM |
|
Or require a btc/credit card down payment, some sort of sign to show your not just some scrub looking to rake people and "hold" 50 units you dam well know they can afford anyway
|
|
|
|
faetos
|
|
August 03, 2017, 11:55:52 AM |
|
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in
|
|
|
|
Ryancope123
|
|
August 03, 2017, 11:58:34 AM |
|
Guys, I currently have 1 l3+ and it's enclosed in a chest freezer with 6" ducting extracting the heat into my home from my garage through a currently double boarded door... she runs very cool and noise is under 50 decibels under load now.
I do have a question, now I have 3 d3's on the way I want to capture the heat and do the same process, can anybody recommend any tips/tricks for this?
My initial idea was this - Can the miners be placed in a rack and pointed upwards? so the exhaust points towards the ceiling, make a custom box that captures the airflow directly over the miners, the only problem would be the noise im thinking...
Or
My dads a carpenter, ask him to knock up double box room to accommodate 5+ miners, with some sort of funnel that will channel the air into a 6" ducting...
|
|
|
|
tw0rak
|
|
August 03, 2017, 12:07:04 PM |
|
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in You can always pay little bit more and buy "ready to pay" order... https://bitcointalk.org/index.php?topic=2060485.0
|
|
|
|
wheelz1200
Legendary
Offline
Activity: 3780
Merit: 1418
|
|
August 03, 2017, 12:19:42 PM |
|
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in You can always pay little bit more and buy "ready to pay" order... https://bitcointalk.org/index.php?topic=2060485.0Or we can let all these "ready to pay" orders expire and buy them at retail when bitmain puts them back up for sale
|
|
|
|
thiec
|
|
August 03, 2017, 12:26:07 PM |
|
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in You can always pay little bit more and buy "ready to pay" order... https://bitcointalk.org/index.php?topic=2060485.0Or we can let all these "ready to pay" orders expire and buy them at retail when bitmain puts them back up for sale LOL.. i like this idea. I start to worry if i bought this account and paid, they could get it back by any mean. So, i cancel all my thought to buy one at the moment. Just wait another chance
|
|
|
|
Ryancope123
|
|
August 03, 2017, 12:26:44 PM |
|
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in You can always pay little bit more and buy "ready to pay" order... https://bitcointalk.org/index.php?topic=2060485.0Or we can let all these "ready to pay" orders expire and buy them at retail when bitmain puts them back up for sale Yes 100% i think its such a rip off where people are jumping on the band wagon like this.. i hope Bitmain sorts this out...
|
|
|
|
CryptoCrane (OP)
|
|
August 03, 2017, 12:29:52 PM |
|
Guys, I currently have 1 l3+ and it's enclosed in a chest freezer with 6" ducting extracting the heat into my home from my garage through a currently double boarded door... she runs very cool and noise is under 50 decibels under load now. I do have a question, now I have 3 d3's on the way I want to capture the heat and do the same process, can anybody recommend any tips/tricks for this? My initial idea was this - Can the miners be placed in a rack and pointed upwards? so the exhaust points towards the ceiling, make a custom box that captures the airflow directly over the miners, the only problem would be the noise im thinking... Or My dads a carpenter, ask him to knock up double box room to accommodate 5+ miners, with some sort of funnel that will channel the air into a 6" ducting...
Yes, the miners can be placed in any orientation you want without issue. As long as the airflow is not obstructed, you'll be good. I once used about 25 AntMiner S3s to heat my home through the winter and it worked great.
|
|
|
|
thiec
|
|
August 03, 2017, 12:33:13 PM |
|
Guys, I currently have 1 l3+ and it's enclosed in a chest freezer with 6" ducting extracting the heat into my home from my garage through a currently double boarded door... she runs very cool and noise is under 50 decibels under load now.
I do have a question, now I have 3 d3's on the way I want to capture the heat and do the same process, can anybody recommend any tips/tricks for this?
My initial idea was this - Can the miners be placed in a rack and pointed upwards? so the exhaust points towards the ceiling, make a custom box that captures the airflow directly over the miners, the only problem would be the noise im thinking...
Or
My dads a carpenter, ask him to knock up double box room to accommodate 5+ miners, with some sort of funnel that will channel the air into a 6" ducting...
Here my set : You can set a small room and split the room in two smaller room with a partial board and just keep small hole to place your miner. The hot small room where the hot air flow out from the miner, you can set a fan to capture the heat and delivery to another place/room and you can control what room to be supply the heat if you can place many fan for each room. The cool small room is where the cool airflow come in and keep the miner temp. If you dont want split your room, you have to use many duck pipe and place to each miner to a central or bigger pipe which you can take the heat to somewhere else
|
|
|
|
zamans98
|
|
August 03, 2017, 12:35:34 PM |
|
hey guys I'm a bit confused.
I've ordered 1x D3+ PSU and paid via BTC directly after I got Bitmains' BTC address.
my current order status is "Paid" but also "Expired" ? Does it mean I was to late? Don't know how I could pay faster lol
Conntacted the support already but wanted to know if anyone of you got the same issue. In worst case I don't get the D3 miner will I receive my full BTC back from Bitmain?
Any experience with that?
i paid via LTC, based on the invoice the address is >> LdgWNbUrXaym73MXHh5noQ2SL1f4z9CjHj but cannot be found on the LTC explorer. Already fired up 2 tickets to check. one from the exchange one to Bitmain
|
|
|
|
wheelz1200
Legendary
Offline
Activity: 3780
Merit: 1418
|
|
August 03, 2017, 12:42:32 PM |
|
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in You can always pay little bit more and buy "ready to pay" order... https://bitcointalk.org/index.php?topic=2060485.0Or we can let all these "ready to pay" orders expire and buy them at retail when bitmain puts them back up for sale Yes 100% i think its such a rip off where people are jumping on the band wagon like this.. i hope Bitmain sorts this out... They will once they realize in their next batch all of their units will get sucked up by these people and no one pays. They will get tired of not being able to sell their hardware when they want to
|
|
|
|
stevebills
Newbie
Offline
Activity: 60
Merit: 0
|
|
August 03, 2017, 12:50:17 PM |
|
Tina possiblly a scammer using this email sell.bitmain@gmail.com so a gmail account is a red flag she has real Bitmain links on her email message does anyone no her from bitmain or is it a scammer? Dear fan of Bitmain, I'm Tina from sales team, Bitmain company. I send email to say we open sell Antminer D3 right now. The quantity is very low, maybe around 50 for all, so please check our website and order right now! D3: https://shop.bitmain.com/productDetail.htm?pid=000201707201601357978QhCAWa5065CYou received this email because you are an user of Bitmain. So sorry if I bother you. If the product out of stock let me know, maybe I can help in the next time! Best, Tina -------- Beijing (Bitmain Headquarters) Building 25, North Olympic Science & Technology Park, Baosheng South Road, Haidian District, Beijing, China 100029. Phone: +86-400 890 8855 Email: info@bitmaintech.comsupplier@bitmain.com (for suppliers) hr@bitmain.com(resume&job consulting)
|
|
|
|
faetos
|
|
August 03, 2017, 12:56:07 PM |
|
lol, missed the boat on those orders. Just woke up to the sold out message. That was a quick sell out. Gratz to you all that got an order in You can always pay little bit more and buy "ready to pay" order... https://bitcointalk.org/index.php?topic=2060485.0Or we can let all these "ready to pay" orders expire and buy them at retail when bitmain puts them back up for sale Yes 100% i think its such a rip off where people are jumping on the band wagon like this.. i hope Bitmain sorts this out... They will once they realize in their next batch all of their units will get sucked up by these people and no one pays. They will get tired of not being able to sell their hardware when they want to +1 on that. This order scalping is out of control. I'd rather miss the boat and keep my coins than perpetuate this nonsense.
|
|
|
|
Necr
Newbie
Offline
Activity: 17
Merit: 0
|
|
August 03, 2017, 02:05:42 PM |
|
Is it possible to estimate DASH difficulty for October 2017?
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1465
Clueless!
|
|
August 03, 2017, 02:16:31 PM |
|
Is it possible to estimate DASH difficulty for October 2017?
Look up. Find a cloud. Estimate distance. Then triple it Will be something like the above analogy. Ugly,ugly indeed.
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
|