Baikal Giant X10

[Marvell2]

guys I hope everyone sees this post quote it with their current pool and coin and daily profit to help as much comers as we can and I find new pools on daily basis I will mention them on this quote
now I am winging between supernova(XVG) and alqo pool(ALQO)

I moved my Baikal mini's over to mining ALQO when I got my x10. I get a few a day. Since the 16th of December (about 4 weeks) I have mined ~180 ALQO with 300mh/s (I'll let you do the math). I use this pool for that: http://mineblocks.co.uk/getting_started It mines right to your wallet. Payouts every round.

I have my x10 mining XVG on supernova for about a week now. Pulling in between 600 - 450 per day. I don't have a good read on today because the miner went off-line for about 6 hours while I was at work.

Both pools have been very reliable.

http://xvg-mg.idcray.com/index.php

has been good for around 400  -450 verg a day for each x10 i have

im trying to figure out how to get multipool working on miningpoolhug and minindg duch atm

for some does anyone know if its correct to set priority to 1 for all the coins ? also they dont heave a default setting for the x10

we  really need a better pool for this miner.  For some reason the miner is mining skein atm on mining pool hub wtf lol

theres also no 17xxx port for quark so cant autoswitch to that its total junk out there

Mining duch does not have skien , cant find the perfect pool

but if mining duch pays out as expected i guess ill be on there.

Auto switching is the best useage for this asic , not manually jumping from pool to pool

[HiddenA]

well my X10 is fucked.

still can't get into it.

connection refused.

reseated all the connectors(friend back home is doing this). changed the UTP cable to a different switch.

now its telling me that my connection timed out. I can see it if I run a network scanner. but I just can't get into the GUI.

fucking baikal  

Try to re-eject sd-card on Orange Pi (and write new firmware at same time).

[burnsauce]

Please give me some img of PiZero you can manage with NiceHash?
After updating to official version V1.1, it became Minerdown in NiceHash.
I am at a loss without moving, Please help me.

Check the port numbers used on the default nicehash pools in the miner web-page.

Make sure they match what nicehash says they should be.

I think I remember reading a while back that the port numbers were wrong.

[Shorty2520]

guys I hope everyone sees this post quote it with their current pool and coin and daily profit to help as much comers as we can and I find new pools on daily basis I will mention them on this quote
now I am winging between supernova(XVG) and alqo pool(ALQO)

I moved my Baikal mini's over to mining ALQO when I got my x10. I get a few a day. Since the 16th of December (about 4 weeks) I have mined ~180 ALQO with 300mh/s (I'll let you do the math). I use this pool for that: http://mineblocks.co.uk/getting_started It mines right to your wallet. Payouts every round.

I have my x10 mining XVG on supernova for about a week now. Pulling in between 600 - 450 per day. I don't have a good read on today because the miner went off-line for about 6 hours while I was at work.

Both pools have been very reliable.

http://xvg-mg.idcray.com/index.php

has been good for around 400  -450 verg a day for each x10 i have

im trying to figure out how to get multipool working on miningpoolhug and minindg duch atm

for some does anyone know if its correct to set priority to 1 for all the coins ? also they dont heave a default setting for the x10

we  really need a better pool for this miner.  For some reason the miner is mining skein atm on mining pool hub wtf lol

theres also no 17xxx port for quark so cant autoswitch to that its total junk out there

Mining duch does not have skien , cant find the perfect pool

but if mining duch pays out as expected i guess ill be on there.

Auto switching is the best useage for this asic , not manually jumping from pool to pool

I did not used it but i think it is like nicehash, using the sgminer options below the poool settings.

I hope this will help you: https://www.nicehash.com/news/114

I've understand this after selling my Baikal Giant+  lol

[Shorty2520]

As i wrote i had several issues with the blue blinking LED's, this is gone without any change.

Now a new problem. I can ping the miner, it is working but i cannot acces it via browser and IP.

Only the baikal monitor shows it. Anyone same problems? Solutions?

[bigassboy]

As i wrote i had several issues with the blue blinking LED's, this is gone without any change.

Now a new problem. I can ping the miner, it is working but i cannot acces it via browser and IP.

Only the baikal monitor shows it. Anyone same problems? Solutions?

try power off and on back the miner

[mano237]

As i wrote i had several issues with the blue blinking LED's, this is gone without any change.

Now a new problem. I can ping the miner, it is working but i cannot acces it via browser and IP.

Only the baikal monitor shows it. Anyone same problems? Solutions?

try power off and on back the miner

I think many people have the problem, there is now fix out yet - Only miner off and on helps.

[miroslavo]

Hello, We have created a group of Baikal Miners owners where we can share information, solve problems that occur or sell and buy machines. It is difficult to contact baikal support and solve the problem right away. There is also a lot of threads in the forums, but it is impossible to read and ask everywhere. This group can help us all. The more we get the better. So if you want, join and add your friends to the facebook group: Baikalminer discuss/share/experience https://www.facebook.com/groups/145674359425246/

[ReSl]

Hello, We have created a group of Baikal Miners owners where we can share information, solve problems that occur or sell and buy machines. It is difficult to contact baikal support and solve the problem right away. There is also a lot of threads in the forums, but it is impossible to read and ask everywhere. This group can help us all. The more we get the better. So if you want, join and add your friends to the facebook group: Baikalminer discuss/share/experience https://www.facebook.com/groups/145674359425246/

Nice, maybe i will join it.

Please support this new Pool: http://mineblocks.co.uk/getting_started
Use this: alqo    ALQOquark    stratum.mineblocks.co.uk    Port: 3075, Diff: 1
Core Wallet: https://alqo.org/#downloads

This is a very promising projekt.
Support for pool is very helpfull @ : https://t.me/mineblocksp

Fee is 0.5 % payments every 20 min when block is confirmed

Price for ALQO is getting bigger. They will change to POS. But first you can mine it!
https://coinmarketcap.com/currencies/alqo/

PoW Block Rewards, Reward Allocation (Starting at the 10. November)
Block 2 - 86400       =    200 ALQO   Masternodes 20% / Miners 80%
Block 86401 - 151200    =    150 ALQO   Masternodes 25% / Miners 75%
Block 151201 - 302400    =   125 ALQO   Masternodes 30% / Miners 70%
Block 302401 - 345600    =    100 ALQO   Masternodes 35% / Miners 65%
Block 345601 - 388800    =    75 ALQO      Masternodes 40% / Miners 60%
Block 388801 - 475200    =   50 ALQO      Masternodes 40% / Miners 60%

https://alqo.org/block-reward/

More Infos @ https://bitcointalk.org/index.php?topic=2343884.0

[chup]

As i wrote i had several issues with the blue blinking LED's, this is gone without any change.

Now a new problem. I can ping the miner, it is working but i cannot acces it via browser and IP.

Only the baikal monitor shows it. Anyone same problems? Solutions?

try power off and on back the miner

I think many people have the problem, there is now fix out yet - Only miner off and on helps.

There is solution, make fix IP-address instead of DHCP. There is guide for doing it over SSH from one member here.

There is no solution for lower hashrate, i.e. lower number of chips per board.

[burnsauce]

Hello, We have created a group of Baikal Miners owners where we can share information, solve problems that occur or sell and buy machines. It is difficult to contact baikal support and solve the problem right away. There is also a lot of threads in the forums, but it is impossible to read and ask everywhere. This group can help us all. The more we get the better. So if you want, join and add your friends to the facebook group: Baikalminer discuss/share/experience https://www.facebook.com/groups/145674359425246/

Facebook sucks.  Please create the form in a place that doesn't require us to sign up for 24-7 monitoring to get help. Thank you.

[wakjeyde]

well my X10 is fucked.

still can't get into it.

connection refused.

reseated all the connectors(friend back home is doing this). changed the UTP cable to a different switch.

now its telling me that my connection timed out. I can see it if I run a network scanner. but I just can't get into the GUI.

fucking baikal  

Try to re-eject sd-card on Orange Pi (and write new firmware at same time).

Can u make a video and show how. I also have the same problem

[cashen]

Hello, We have created a group of Baikal Miners owners where we can share information, solve problems that occur or sell and buy machines. It is difficult to contact baikal support and solve the problem right away. There is also a lot of threads in the forums, but it is impossible to read and ask everywhere. This group can help us all. The more we get the better. So if you want, join and add your friends to the facebook group: Baikalminer discuss/share/experience https://www.facebook.com/groups/145674359425246/

Facebook sucks.  Please create the form in a place that doesn't require us to sign up for 24-7 monitoring to get help. Thank you.

Join the Discord group

https://discord.gg/uy8PtVN

[burnsauce]

I love this miner

...when it's working.

Damn thing went off-line 2 times in the past 48 hours which is really bad because it always does it when I'm not around, or asleep.

Another 7 hours off-line without warning.  I don't think I need to tell anyone here how much $ that is... or how I can't get the opportunity back.

Leave the miner's side at your own risk! This thing needs a babysitter.

[burnsauce]

Hello, We have created a group of Baikal Miners owners where we can share information, solve problems that occur or sell and buy machines. It is difficult to contact baikal support and solve the problem right away. There is also a lot of threads in the forums, but it is impossible to read and ask everywhere. This group can help us all. The more we get the better. So if you want, join and add your friends to the facebook group: Baikalminer discuss/share/experience https://www.facebook.com/groups/145674359425246/

Facebook sucks.  Please create the form in a place that doesn't require us to sign up for 24-7 monitoring to get help. Thank you.

Join the Discord group

https://discord.gg/uy8PtVN

Why can't we talk about it here?

[miroslavo]

Hello, We have created a group of Baikal Miners owners where we can share information, solve problems that occur or sell and buy machines. It is difficult to contact baikal support and solve the problem right away. There is also a lot of threads in the forums, but it is impossible to read and ask everywhere. This group can help us all. The more we get the better. So if you want, join and add your friends to the facebook group: Baikalminer discuss/share/experience https://www.facebook.com/groups/145674359425246/

Facebook sucks.  Please create the form in a place that doesn't require us to sign up for 24-7 monitoring to get help. Thank you.

Join the Discord group

https://discord.gg/uy8PtVN

Why can't we talk about it here?

Because when someone needs help with a miner, he wants to solve the problem as soon as possible.

[momodigital]

well my X10 is fucked.

still can't get into it.

connection refused.

reseated all the connectors(friend back home is doing this). changed the UTP cable to a different switch.

now its telling me that my connection timed out. I can see it if I run a network scanner. but I just can't get into the GUI.

fucking baikal  

sory, did you try to reflash the img? maybe it helps.

[crytotronik]

Anyone knows whats new/different in the new firmware V1.1? Should I upgrade, even if I have no problems with my V1.0?
A changelog would be awesome....but I guess this doesnt exist at all.

cheers

[AppleStuff]

Anyone knows whats new/different in the new firmware V1.1? Should I upgrade, even if I have no problems with my V1.0?
A changelog would be awesome....but I guess this doesnt exist at all.

cheers

From a mail from Baikal:

If your baikal X10 works fine,you don't need to do the update.
Only have some setting about enable-nicehashsma :true

I updated and cannot see any differences anywhere.

[crytotronik]

Anyone knows whats new/different in the new firmware V1.1? Should I upgrade, even if I have no problems with my V1.0?
A changelog would be awesome....but I guess this doesnt exist at all.

cheers

From a mail from Baikal:

If your baikal X10 works fine,you don't need to do the update.
Only have some setting about enable-nicehashsma :true

I updated and cannot see any differences anywhere.

Thanks for this info. I will try to flash a second sd-card (not the one came with the miner), so I can exchange them easy.