Antminer D3 Blissz firmware (10/12 v1.12 update)

[BartoszN1990]

guys after update one chain hide how to resolved this problem ?

Chain#   ASIC#   Frequency   MH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
2
60
537
5374.35
0
27
47
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3
60
537
4868.28
0
27
47
oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
Fan#   Fan1   Fan2
Speed (r/min)   2,970   4,260                  



i reset shitch off and start .. nothing help .. how to get bac chain 1 ?

Nov 27 07:31:58 (none) local0.notice cgminer[382]: tty_init_chain chainid = 1
Nov 27 07:31:58 (none) local0.err cgminer[382]: create rx read thread for chain 1 ok
Nov 27 07:31:58 (none) local0.notice cgminer[382]: Start A New Asic Response.Chain Id:[1]
Nov 27 07:31:58 (none) local0.err cgminer[382]: create tx read thread for chain 1 ok
Nov 27 07:31:58 (none) local0.notice cgminer[382]: open device over
Nov 27 07:31:58 (none) local0.notice cgminer[382]: tty_init_chain
Nov 27 07:31:58 (none) local0.notice cgminer[382]: tty_init_chain chainid = 2
Nov 27 07:31:58 (none) local0.err cgminer[382]: create rx read thread for chain 2 ok
Nov 27 07:31:58 (none) local0.notice cgminer[382]: Start A New Asic Response.Chain Id:[2]
Nov 27 07:31:58 (none) local0.err cgminer[382]: create tx read thread for chain 2 ok
Nov 27 07:31:58 (none) local0.notice cgminer[382]: open device over
Nov 27 07:31:58 (none) local0.notice cgminer[382]: tty_init_chain
Nov 27 07:31:58 (none) local0.notice cgminer[382]: tty_init_chain chainid = 3
Nov 27 07:31:58 (none) local0.err cgminer[382]: create rx read thread for chain 3 ok
Nov 27 07:31:58 (none) local0.notice cgminer[382]: Start A New Asic Response.Chain Id:[3]
Nov 27 07:31:59 (none) local0.err cgminer[382]: create tx read thread for chain 3 ok
Nov 27 07:31:59 (none) local0.notice cgminer[382]: open device over
Nov 27 07:31:59 (none) local0.notice cgminer[382]: check_every_chain_asic_number
Nov 27 07:31:59 (none) local0.warn cgminer[382]: check_asic_reg: Chain1 has 0 ASICs
Nov 27 07:32:00 (none) local0.warn cgminer[382]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 07:32:00 (none) local0.warn cgminer[382]: check_asic_reg: Chain3 has 60 ASICs

Increase the voltage of chain 1
Power off for a minute and power on again
If that won't work. Flash the stock fw and let me know if that works. If yes  I need to have a look at it

I do like u sai... chain go out i dont se them

Nov 27 08:04:48 (none) local0.notice cgminer[376]: check_every_chain_asic_number
Nov 27 08:04:48 (none) local0.warn cgminer[376]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 08:04:48 (none) local0.err cgminer[376]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1626
Nov 27 08:04:48 (none) local0.err cgminer[376]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1627
Nov 27 08:04:49 (none) local0.warn cgminer[376]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 08:04:49 (none) local0.err cgminer[376]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1631
Nov 27 08:04:49 (none) local0.err cgminer[376]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1632
Nov 27 08:04:49 (none) local0.err cgminer[376]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1633
Nov 27 08:04:49 (none) local0.err cgminer[376]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1634
Nov 27 08:04:49 (none) local0.err cgminer[376]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1635
Nov 27 08:04:49 (none) local0.warn cgminer[376]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 08:04:49 (none) local0.notice cgminer[376]: recheck_asic_num DONE!
Nov 27 08:04:49 (none) local0.notice cgminer[376]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Nov 27 08:04:49 (none) local0.notice cgminer[376]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Nov 27 08:04:49 (none) local0.notice cgminer[376]: set_ticket_mask ticket_mask = 0x0000001d
Nov 27 08:04:49 (none) local0.notice cgminer[376]: every_chain_get_PIC16F1704_freq_new
Nov 27 08:04:51 (none) local0.notice cgminer[376]: set_frequency: frequency = 537
Nov 27 08:04:51 (none) local0.notice cgminer[376]: set_frequency: frequency = 537
Nov 27 08:04:51 (none) local0.notice cgminer[376]: set_frequency: frequency = 537
Nov 27 08:04:51 (none) local0.notice cgminer[376]: set_frequency: frequency = 537
Nov 27 08:04:51 (none) local0.notice cgminer[376]: software_set_address: chain 0 has 0 ASIC, and addrInterval is 1
Nov 27 08:04:51 (none) local0.notice cgminer[376]: Now Set

• Chain Address

Nov 27 08:04:51 (none) local0.notice cgminer[376]: software_set_address: chain 1 has 60 ASIC, and addrInterval is 1
Nov 27 08:04:51 (none) local0.notice cgminer[376]: Now Set [1] Chain Address
Nov 27 08:04:52 (none) local0.notice cgminer[376]: software_set_address: chain 2 has 60 ASIC, and addrInterval is 1
Nov 27 08:04:52 (none) local0.notice cgminer[376]: Now Set [2] Chain Address
Nov 27 08:04:53 (none) local0.notice cgminer[376]: software_set_address: chain 3 has 0 ASIC, and addrInterval is 1
Nov 27 08:04:53 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic: reg_value = 0x07007a61
Nov 27 08:04:53 (none) local0.notice cgminer[376]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 08:04:54 (none) local0.warn cgminer[376]: set_temperature_offset_value
Nov 27 08:04:55 (none) local0.notice cgminer[376]: set_temperature_offset_value: Chain0 Sensor0 temp offset : 00,
Nov 27 08:04:55 (none) local0.notice cgminer[376]: set_temperature_offset_value: Chain1 Sensor0 temp offset : -2,
Nov 27 08:04:56 (none) local0.notice cgminer[376]: set_temperature_offset_value: Chain2 Sensor0 temp offset : -9,
Nov 27 08:04:56 (none) local0.notice cgminer[376]: frequency = '537'
Nov 27 08:04:56 (none) local0.notice cgminer[376]: dev.timeout = 562356 us
Nov 27 08:04:56 (none) local0.notice cgminer[376]: open_core
Nov 27 08:04:59 (none) local0.err cgminer[376]: low hashrate detection trigger: 0.000000 Gh/s
Nov 27 08:04:59 (none) local0.notice cgminer[376]: set voltage = 513.491208  real:600 mv
Nov 27 08:04:59 (none) local0.notice cgminer[376]: set_PIC16F1704_voltage_new ok, voltage = 0x58
Nov 27 08:04:59 (none) local0.notice cgminer[376]: set_PIC16F1704_voltage_new ok, voltage = 0x58
Nov 27 08:05:00 (none) local0.notice cgminer[376]: set_PIC16F1704_voltage_new ok, voltage = 0x58
Nov 27 08:05:00 (none) local0.err cgminer[376]: cgminer time error total_secs = 1511769900.381811 last_total_secs = 1.000000
Nov 27 08:05:01 (none) local0.err cgminer[376]: D1 0: work 7f not find error

[BartoszN1990]

Nov 27 08:11:16 (none) local0.err cgminer[29544]: create rx read thread for /dev/ttyO1 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: Start A New Asic Response.Chain Id:[0]
Nov 27 08:11:16 (none) local0.err cgminer[29544]: create tx read thread for /dev/ttyO1 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: tty_init chainid = 1
Nov 27 08:11:16 (none) local0.err cgminer[29544]: create rx read thread for /dev/ttyO2 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: Start A New Asic Response.Chain Id:[1]
Nov 27 08:11:16 (none) local0.err cgminer[29544]: create tx read thread for /dev/ttyO2 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: tty_init chainid = 2
Nov 27 08:11:16 (none) local0.err cgminer[29544]: create rx read thread for /dev/ttyO4 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: Start A New Asic Response.Chain Id:[2]
Nov 27 08:11:16 (none) local0.err cgminer[29544]: create tx read thread for /dev/ttyO4 ok
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: open device over
Nov 27 08:11:16 (none) local0.notice cgminer[29544]: check_every_chain_asic_number
Nov 27 08:11:16 (none) local0.warn cgminer[29544]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 08:11:16 (none) local0.warn cgminer[29544]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 08:11:17 (none) local0.warn cgminer[29544]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 08:11:17 (none) local0.notice cgminer[29544]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 08:11:18 (none) local0.notice cgminer[29544]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 08:11:18 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:19 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:19 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:19 (none) local0.notice cgminer[29544]: reset_all_hash_board
Nov 27 08:11:19 (none) local0.notice cgminer[29544]: check_every_chain_asic_number
Nov 27 08:11:19 (none) local0.warn cgminer[29544]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 08:11:19 (none) local0.err cgminer[29544]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 541
Nov 27 08:11:19 (none) local0.warn cgminer[29544]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 08:11:19 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 541
Nov 27 08:11:19 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 542
Nov 27 08:11:20 (none) local0.warn cgminer[29544]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 08:11:20 (none) local0.notice cgminer[29544]: recheck_asic_num DONE!
Nov 27 08:11:20 (none) local0.notice cgminer[29544]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 08:11:21 (none) local0.notice cgminer[29544]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 08:11:21 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:21 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:21 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:21 (none) local0.notice cgminer[29544]: reset_all_hash_board
Nov 27 08:11:22 (none) local0.notice cgminer[29544]: check_every_chain_asic_number
Nov 27 08:11:22 (none) local0.warn cgminer[29544]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 08:11:22 (none) local0.err cgminer[29544]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1082
Nov 27 08:11:22 (none) local0.warn cgminer[29544]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 08:11:22 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1083
Nov 27 08:11:22 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1084
Nov 27 08:11:22 (none) local0.warn cgminer[29544]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 08:11:22 (none) local0.notice cgminer[29544]: recheck_asic_num DONE!
Nov 27 08:11:22 (none) local0.notice cgminer[29544]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: enable_PIC16F1704_dc_dc_new ok
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: reset_all_hash_board
Nov 27 08:11:24 (none) local0.notice cgminer[29544]: check_every_chain_asic_number
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 1
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 2
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 3
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 4
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 5
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 6
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 7
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 0 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0x00 rp = 8
Nov 27 08:11:24 (none) local0.warn cgminer[29544]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 08:11:24 (none) local0.err cgminer[29544]: get_asic_response: 1 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1623
Nov 27 08:11:25 (none) local0.warn cgminer[29544]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 08:11:25 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0x00, Header2 = 0xaa rp = 1625
Nov 27 08:11:25 (none) local0.err cgminer[29544]: get_asic_response: 2 Headers are not corret! Header0 = 0x00, Header1 = 0xaa, Header2 = 0x55 rp = 1626
Nov 27 08:11:25 (none) local0.warn cgminer[29544]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 08:11:25 (none) local0.notice cgminer[29544]: recheck_asic_num DONE!
Nov 27 08:11:25 (none) local0.notice cgminer[29544]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Nov 27 08:11:25 (none) local0.notice cgminer[29544]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Nov 27 08:11:25 (none) local0.notice cgminer[29544]: set_ticket_mask ticket_mask = 0x0000001d
Nov 27 08:11:25 (none) local0.notice cgminer[29544]: every_chain_get_PIC16F1704_freq_new
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: set_frequency: frequency = 106
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: set_frequency: frequency = 537
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: set_frequency: frequency = 537
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: set_frequency: frequency = 537
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: software_set_address: chain 0 has 0 ASIC, and addrInterval is 1
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: Now Set

• Chain Address

Nov 27 08:11:27 (none) local0.notice cgminer[29544]: software_set_address: chain 1 has 60 ASIC, and addrInterval is 1
Nov 27 08:11:27 (none) local0.notice cgminer[29544]: Now Set [1] Chain Address
Nov 27 08:11:28 (none) local0.notice cgminer[29544]: software_set_address: chain 2 has 60 ASIC, and addrInterval is 1
Nov 27 08:11:28 (none) local0.notice cgminer[29544]: Now Set [2] Chain Address
Nov 27 08:11:29 (none) local0.notice cgminer[29544]: software_set_address: chain 3 has 0 ASIC, and addrInterval is 1
Nov 27 08:11:29 (none) local0.notice cgminer[29544]: enable_read_temperature_from_asic: reg_value = 0x07007a61
Nov 27 08:11:29 (none) local0.notice cgminer[29544]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 08:11:30 (none) local0.warn cgminer[29544]: set_temperature_offset_value
Nov 27 08:11:31 (none) local0.notice cgminer[29544]: set_temperature_offset_value: Chain0 Sensor0 temp offset : 00,
Nov 27 08:11:31 (none) local0.notice cgminer[29544]: set_temperature_offset_value: Chain1 Sensor0 temp offset : 03,
Nov 27 08:11:32 (none) local0.notice cgminer[29544]: set_temperature_offset_value: Chain2 Sensor0 temp offset : 01,
Nov 27 08:11:32 (none) local0.notice cgminer[29544]: frequency = '537'
Nov 27 08:11:32 (none) local0.notice cgminer[29544]: dev.timeout = 562356 us
Nov 27 08:11:32 (none) local0.notice cgminer[29544]: open_core
Nov 27 08:11:35 (none) local0.err cgminer[29544]: low hashrate detection trigger: 1111.728000 Gh/s
Nov 27 08:11:35 (none) local0.notice cgminer[29544]: set voltage = 1326.681400  real:155 mv
Nov 27 08:11:35 (none) local0.notice cgminer[29544]: set_PIC16F1704_voltage_new ok, voltage = 0x37
Nov 27 08:11:35 (none) local0.notice cgminer[29544]: set_PIC16F1704_voltage_new ok, voltage = 0x9b
Nov 27 08:11:36 (none) local0.notice cgminer[29544]: set_PIC16F1704_voltage_new ok, voltage = 0x9b
Nov 27 08:11:36 (none) local0.err cgminer[29544]: cgminer time error total_secs = 1511770296.432706 last_total_secs = 1.000000
Nov 27 08:11:37 (none) local0.err cgminer[29544]: D1 0: work 7f not find error
Nov 27 08:11:42 (none) local0.warn cgminer[29544]: API running in IP access mode on port 4028 (18)
Nov 27 08:12:01 (none) local0.warn cgminer[29544]: Pool 2 stratum+tcp://stratum-dash.antpool.com:25 alive, testing stability
Nov 27 08:12:01 (none) local0.warn cgminer[29544]: Switching to pool 2 stratum+tcp://stratum-dash.antpool.com:25
Nov 27 08:12:02 (none) local0.warn cgminer[29544]: Pool 1 stratum+tcp://stratum-dash.antpool.com:443 alive, testing stability
Nov 27 08:12:02 (none) local0.warn cgminer[29544]: Switching to pool 1 stratum+tcp://stratum-dash.antpool.com:443
Nov 27 08:13:04 (none) local0.warn cgminer[29544]: Switching to pool 3 stratum+tcp://dash.suprnova.cc:9995
Nov 27 08:15:07 (none) local0.warn cgminer[29544]: Pool 1 stratum+tcp://stratum-dash.antpool.com:443 stable for 5 mins
Nov 27 08:15:07 (none) local0.warn cgminer[29544]: Switching to pool 1 stratum+tcp://stratum-dash.antpool.com:443
Nov 27 08:15:17 (none) local0.warn cgminer[29544]: Waiting for work to be available from pools.
Nov 27 08:15:27 (none) local0.warn cgminer[29544]: Work available from pools, resuming.

[blissz]

Try to flash stock. It might be that your miner doesnt like the new fast start sequence...

[DragosD1]

Hey Blissz, is the feature "Automatic reboot on low hashrate detection" working on your latest FW?

Yes it works

Not really, or not as intended.

That's what I saw already 2 times since flashing last version.
And, yes, option to restart on low HR is enabled

https://drive.google.com/open?id=1N_qPR2AoE4hT6S1ErvH2UhizaPVGo9WZ

[blissz]

Hey Blissz, is the feature "Automatic reboot on low hashrate detection" working on your latest FW?

Yes it works

Not really, or not as intended.

That's what I saw already 2 times since flashing last version.
And, yes, option to restart on low HR is enabled

You're on the 26/11 version? Can you post your full kernel log. Thanks

[DragosD1]

Hey Blissz, is the feature "Automatic reboot on low hashrate detection" working on your latest FW?

Yes it works

Not really, or not as intended.

That's what I saw already 2 times since flashing last version.
And, yes, option to restart on low HR is enabled

https://drive.google.com/open?id=1N_qPR2AoE4hT6S1ErvH2UhizaPVGo9WZ

You're on the 26/11 version? Can you post your full kernel log. Thanks

Yes, last bersion, how do I see full log? It's still there if I rebooted?

[blissz]

Hey Blissz, is the feature "Automatic reboot on low hashrate detection" working on your latest FW?

Yes it works

Not really, or not as intended.

That's what I saw already 2 times since flashing last version.
And, yes, option to restart on low HR is enabled

You're on the 26/11 version? Can you post your full kernel log. Thanks

Yes, last bersion, how do I see full log? It's still there if I rebooted?

No it's gone. No problem. But on your current log then i know enough. Thanks!

[hta]

Hi Blissz,

Auto reboot did not work

[cryptonitro]

Hi Blissz,

Auto reboot did not work

hope HW error are due to the xxx and not before , in other case , you better lower the 2nd board , save his life ...

reboot may be need to reach lower hashrate

thanks for your return

[RfBTC]

Hi guys,  does anyone mining ONIX (ONX)  ? what amount do you got and what hashrate ?

[kwibis]

Hi guys,  does anyone mining ONIX (ONX)  ? what amount do you got and what hashrate ?

Was mining it last week, got 37 onix in 24 hours at 37 gh/s, stopped it after a day or 2. Though this is completely O.T. xD

[microtechies]

I had this same problem and Bitmain are sending me a replacement board for free even thought it was my mistake

Hi all,

I hope that you can help me !!!!!


I accidentally flash my L3+ with the D3 update from Blissz.....  
When i discoverd that, i flash it back with the update from Bitmain for the L3+.

After that it does not see the hashboards anymore..  ALL 4...

Has anyone an idea what i can do??

NEED help....

https://imgur.com/JaKvrxw

I think your controller board is defective, if you still have a warranty with Bitmain, try to create a repair ticket and send that controller board to them to repair or replace a new one. Check both of your fans and all of the hashboards were working well before the firmware accident, if one of them is defective, then send the defective one with your controller board in one trip.

Had you tried the SD card recovery? https://bitmainhelp.zendesk.com/hc/en-us/articles/115000216034-L3-L3-Control-Board-Program-Recovery

[DragosD1]

Message from inginer.xyz on petition site:

" https://assets.change.org/photos/0/mw/en/mGMWenNeDLiHygj-800x450-noPad.jpg?1511796090"

Looks like a scam to me....at least, the website IS like a real scam, asking just for donations and saying nothing about the "great team" that has gathered once again (lol)....we'll see...
Also, nothing about previous projects that the "great team" has finished before gathering again, rofl!!! 

[stalin12]

Huge gratitude for the firmware.
Automatic reboot does not work. 

https://s8.hostingkartinok.com/uploads/images/2017/11/fe8496f3d100d72020c03b9037fc66d3.jpg

[bigal82]

hey blizz
using your firmware sinde 3 days but it seemd to demage the miner

one device hast only 2 of 3 boards running

Nov 27 16:19:31 (none) local0.warn cgminer[12627]: check_asic_reg: Chain1 has 0 ASICs

Chain 1 is lost in the  monitoring and hashrate is only 2/3

please give a feedback asap

[deathless]

hey blizz
using your firmware sinde 3 days but it seemd to demage the miner

one device hast only 2 of 3 boards running

Nov 27 16:19:31 (none) local0.warn cgminer[12627]: check_asic_reg: Chain1 has 0 ASICs

Chain 1 is lost in the  monitoring and hashrate is only 2/3

please give a feedback asap

Looks like your chains are getting alot of errors I would cut back to 481 on all chips ive ran for 2 days and only 9 errors
https://imgur.com/Kuok6AA

[deathless]

Message from inginer.xyz on petition site:

" https://assets.change.org/photos/0/mw/en/mGMWenNeDLiHygj-800x450-noPad.jpg?1511796090"

Looks like a scam to me....at least, the website IS like a real scam, asking just for donations and saying nothing about the "great team" that has gathered once again (lol)....we'll see...
Also, nothing about previous projects that the "great team" has finished before gathering again, rofl!!! 

Yeah i got the samething is 100% a scam cause bitmain doesnt know about it. and they are showing bitmains twitter account so yeahhh scam

[cryptonitro]

Message from inginer.xyz on petition site:

" https://assets.change.org/photos/0/mw/en/mGMWenNeDLiHygj-800x450-noPad.jpg?1511796090"

Looks like a scam to me....at least, the website IS like a real scam, asking just for donations and saying nothing about the "great team" that has gathered once again (lol)....we'll see...
Also, nothing about previous projects that the "great team" has finished before gathering again, rofl!!! 

Yeah i got the samething is 100% a scam cause bitmain doesnt know about it. and they are showing bitmains twitter account so yeahhh scam

The extension .xyz of website , are massively used for scam. and dont believe about x13,x14,x15 etc for those chip
 dont send anything

[blissz]

hey blizz
using your firmware sinde 3 days but it seemd to demage the miner

one device hast only 2 of 3 boards running

Nov 27 16:19:31 (none) local0.warn cgminer[12627]: check_asic_reg: Chain1 has 0 ASICs

Chain 1 is lost in the  monitoring and hashrate is only 2/3

please give a feedback asap

Can you try to flash the stock firmware on that miner, then tell me if it works ok. Then flash back the latest 26/11 custom one and tell me if it's bad again. Thanks

[blissz]

Huge gratitude for the firmware.
Automatic reboot does not work. 

You're welcome! It will be fixed soon