BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes)

[tiras]

guide http://wiki.biblepay.org/Create_Sanctuary_2   still showing 1,550,001 BBP and referring to the old version setup.

Any chance of having it updated ?

also,  how do we migrate or consolidate 3 old sanctuaries to 1 evo one ?

apparently, trying to start old sanctuary using evo wallet doesn't work  .

[1715280831]

1715280831

[1715280831]

1715280831

[bible_pay]

guide http://wiki.biblepay.org/Create_Sanctuary_2   still showing 1,550,001 BBP and referring to the old version setup.

Any chance of having it updated ?

also,  how do we migrate or consolidate 3 old sanctuaries to 1 evo one ?

apparently, trying to start old sanctuary using evo wallet doesn't work  .

Ok, I updated the wiki.

As far as consolidating from 3 to 1:

Go to coin control
Unlock the 3 old unspent outputs that are locked (in Evo they might be unlocked automatically)
Check them
Spend them to a new transaction for 4,500,001 to a new receiving address labeled such as Tiras1-New (or whatever naming convention you prefer).
Copy the TXID and output ordinal into masternode.conf, replacing the old TXID-ordinal for one of your sanc entries, and also update the name to be the new name.
Delete the other 2 sanc entries in the config.
Restart.

Then verify your sanctuary starts.  (Start missing, etc as usual).

[capulo]

almost all my miners are on block   "blocks": 123036,

but i didnt mine anything, doesnot matter if fork or not
do i need to stake yet?

[MIP]

If you are lower could you please try resyncing?

I tried resyncing and both controller wallet and MNs are ok now (block 123126, hash 7355d3ef0e69ddbae973912643185bcfe5fbbeef8d30f6726eec8047a89a4e5d)

So everything looks great, but when I finally activate the MNs, it says "success" in the controller wallet, and PRE_ENABLED, but in the MN VPS I see

Code:

$ biblepay-cli mnsync status 
{
"AssetID": 999,
"AssetName": "MASTERNODE_SYNC_FINISHED",
"AssetStartTime": 1559500589,
"Attempt": 0,
"IsBlockchainSynced": true,
"IsMasternodeListSynced": true,
"IsWinnersListSynced": true,
"IsSynced": true,
"IsFailed": false

$ biblepay-cli masternode status 
{
"outpoint": "0000000000000000000000000000000000000000000000000000000000000000-4294967295",
"service": "209.250.243.91:40000",
"status": "Not capable masternode: Masternode not in masternode list"
}
}

Is this expected and maybe I have to wait some time? (in previous classic it showed "active" right after activation from controller wallet)
Also, I checked collateral tx amount and also if it is old enough.

[bible_pay]

almost all my miners are on block   "blocks": 123036,

but i didnt mine anything, doesnot matter if fork or not
do i need to stake yet?

Yeah, this is because you were loyally mining through the governance block and your node marked the block as bad, and its a very convoluted explanation to say more  - other than it is this way because Dash is erroring on the safe side with blocks, so the only way out of this, is to delete the normal blocks,evodb,chainstate,mncache,mnp* and restart and resync.  Then you should hit the 123130 chain (diff is about 6K right now).

Sorry for the inconvenience.  I resynced the pool to be on this chain.

[bible_pay]

If you are lower could you please try resyncing?

I tried resyncing and both controller wallet and MNs are ok now (block 123126, hash 7355d3ef0e69ddbae973912643185bcfe5fbbeef8d30f6726eec8047a89a4e5d)

So everything looks great, but when I finally activate the MNs, it says "success" in the controller wallet, and PRE_ENABLED, but in the MN VPS I see

Code:

$ biblepay-cli mnsync status 
{
"AssetID": 999,
"AssetName": "MASTERNODE_SYNC_FINISHED",
"AssetStartTime": 1559500589,
"Attempt": 0,
"IsBlockchainSynced": true,
"IsMasternodeListSynced": true,
"IsWinnersListSynced": true,
"IsSynced": true,
"IsFailed": false

$ biblepay-cli masternode status 
{
"outpoint": "0000000000000000000000000000000000000000000000000000000000000000-4294967295",
"service": "209.250.243.91:40000",
"status": "Not capable masternode: Masternode not in masternode list"
}
}

Is this expected and maybe I have to wait some time? (in previous classic it showed "active" right after activation from controller wallet)
Also, I checked collateral tx amount and also if it is old enough.

I think waiting does work in this case, but another way around to be sure is on the Sanc itself, stop it, delete the mnc*.* and gov*.* files and mnp*.* files (just the caches) and restart, and as soon as mnsync status passes 3, I believe your node will be more up to date (with the Sanc list).

EDIT:  I don't see you in my Sanc list; try ensuring your controller does not have any banned peers first, then re-start the Sanc (with the Start button from the controller), its possible it needs a new re-broadcast done.  It takes up to an hour sometimes to see it change, so this is probably normal.

 

[bible_pay]

almost all my miners are on block   "blocks": 123036,

but i didnt mine anything, doesnot matter if fork or not
do i need to stake yet?

On staking, no not yet, we have to wait until block 123,200 for all sancs to upgrade first, then we assess conditions and release a game plan for the first GSC; but a thumb in the wind estimate is staking around 124,000.

[MIP]

I think waiting does work in this case, but another way around to be sure is on the Sanc itself, stop it, delete the mnc*.* and gov*.* files and mnp*.* files (just the caches) and restart, and as soon as mnsync status passes 3, I believe your node will be more up to date (with the Sanc list).

EDIT:  I don't see you in my Sanc list; try ensuring your controller does not have any banned peers first, then re-start the Sanc (with the Start button from the controller), its possible it needs a new re-broadcast done.  It takes up to an hour sometimes to see it change, so this is probably normal.
 

Ok I did as you said and it didn't work when launching again (node not yet activated), but then I just activated once again from controller wallet and it activated instantly!

Thank you so much for all your help.

I do know -probably better than anyone else- about the incredible amount of time and effort that is behind this Evo release, and all I can say now is: God bless you my friend.

[bible_pay]

I think waiting does work in this case, but another way around to be sure is on the Sanc itself, stop it, delete the mnc*.* and gov*.* files and mnp*.* files (just the caches) and restart, and as soon as mnsync status passes 3, I believe your node will be more up to date (with the Sanc list).

EDIT:  I don't see you in my Sanc list; try ensuring your controller does not have any banned peers first, then re-start the Sanc (with the Start button from the controller), its possible it needs a new re-broadcast done.  It takes up to an hour sometimes to see it change, so this is probably normal.
 

Ok I did as you said and it didn't work when launching again (node not yet activated), but then I just activated once again from controller wallet and it activated instantly!

Thank you so much for all your help.

I do know -probably better than anyone else- about the incredible amount of time and effort that is behind this Evo release, and all I can say now is: God bless you my friend.

Thanks;  We couldn't have done it without you!

[tiras]

guide http://wiki.biblepay.org/Create_Sanctuary_2   still showing 1,550,001 BBP and referring to the old version setup.

Any chance of having it updated ?

also,  how do we migrate or consolidate 3 old sanctuaries to 1 evo one ?

apparently, trying to start old sanctuary using evo wallet doesn't work  .

Ok, I updated the wiki.

As far as consolidating from 3 to 1:

Go to coin control
Unlock the 3 old unspent outputs that are locked (in Evo they might be unlocked automatically)
Check them
Spend them to a new transaction for 4,500,001 to a new receiving address labeled such as Tiras1-New (or whatever naming convention you prefer).
Copy the TXID and output ordinal into masternode.conf, replacing the old TXID-ordinal for one of your sanc entries, and also update the name to be the new name.
Delete the other 2 sanc entries in the config.
Restart.
Then verify your sanctuary starts.  (Start missing, etc as usual).

thank you Rob!

I'm short of ~ 800K BBP to start another sanc ( MN ) .

Anybody willing to form a share is welcome .  
800K can be split into  2 or 3 shares.
I'm guaranteeing regular payouts ( weekly or twice a week )  with transaction reports.
Will send a full refund of your share after enough funds accumulated to run a sanc on my own.

[slovakia]

any good addnodes?

[bible_pay]

any good addnodes?

There is no need for an addnode.

Checking our first seed node (dns1.biblepay.org) : UP

[bible_pay]

guide http://wiki.biblepay.org/Create_Sanctuary_2   still showing 1,550,001 BBP and referring to the old version setup.

Any chance of having it updated ?

also,  how do we migrate or consolidate 3 old sanctuaries to 1 evo one ?

apparently, trying to start old sanctuary using evo wallet doesn't work  .

Ok, I updated the wiki.

As far as consolidating from 3 to 1:

Go to coin control
Unlock the 3 old unspent outputs that are locked (in Evo they might be unlocked automatically)
Check them
Spend them to a new transaction for 4,500,001 to a new receiving address labeled such as Tiras1-New (or whatever naming convention you prefer).
Copy the TXID and output ordinal into masternode.conf, replacing the old TXID-ordinal for one of your sanc entries, and also update the name to be the new name.
Delete the other 2 sanc entries in the config.
Restart.
Then verify your sanctuary starts.  (Start missing, etc as usual).

thank you Rob!

I'm short of ~ 800K BBP to start another sanc ( MN ) .

Anybody willing to form a share is welcome .  
800K can be split into  2 or 3 shares.
I'm guaranteeing regular payouts ( weekly or twice a week )  with transaction reports.
Will send a full refund of your share after enough funds accumulated to run a sanc on my own.

It will be interesting to see how many 'jump ship' during this upgrade.

I always had a feeling about 100 of those non-voting sancs were owned by someone who had no idea how to host a node.

Oh btw, I took your advice and applied for us at stocks.exchange the other day (and at yobit also).

[thesnat21]

any good addnodes?

There is no need for an addnode.

Checking our first seed node (dns1.biblepay.org) : UP

I keep having issues connecting to dns1.biblepay.org (connects then quickly disconnects)

Also, I noticed that and some others are on  .2.9 version, while the download client is .3.1 are there any changes that need to be worried about in between?

[bible_pay]

any good addnodes?

There is no need for an addnode.

Checking our first seed node (dns1.biblepay.org) : UP

I keep having issues connecting to dns1.biblepay.org (connects then quickly disconnects)

Also, I noticed that and some others are on  .2.9 version, while the download client is .3.1 are there any changes that need to be worried about in between?

Hmm, yes, I see you are right, I just upped the maxconnections to 865 on node1, and removed the banlist and restarted it.

So the only change in 1431 was we added the diary entries to the RPC 'leaderboard' command (to see your own entries).  But anyone who downloaded the latest should have 1.4.3.1.  The only people with 1429 are most likely the people who went from testnet directly to prod and didnt upgrade.

[slovakia]

any control hash block 1 100 1000?
thanks

[bible_pay]

any control hash block 1 100 1000?
thanks

I'm quite confused, what is a control hash?

[slovakia]

getblockhash 48800 10cd2a8a52c95b79e320c57b147423fab5ef573273eecdbaf3750c9b2033539f

its correct chain?

[bible_pay]

getblockhash 48800 10cd2a8a52c95b79e320c57b147423fab5ef573273eecdbaf3750c9b2033539f

its correct chain?

getblockhash 123160

a05adbf7befd7b3e39fd9d37a0c145dd826d9f2e2a56c448f1c775e43ffbc882
(Diff is 10k)



=-=-=-=-=-=

I'm sure Togo is upgrading explorer.biblepay.org; Togo let us know if Evo runs faster for its database (maybe its fixed).


Has anyone contacted chainz?  They may not know to upgrade.

[bible_pay]

getblockhash 48800 10cd2a8a52c95b79e320c57b147423fab5ef573273eecdbaf3750c9b2033539f

its correct chain?

getblockhash 123160

a05adbf7befd7b3e39fd9d37a0c145dd826d9f2e2a56c448f1c775e43ffbc882
(Diff is 10k)



=-=-=-=-=-=

I'm sure Togo is upgrading explorer.biblepay.org; Togo let us know if Evo runs faster for its database (maybe its fixed).


Has anyone contacted chainz?  They may not know to upgrade.

Never mind, I sent an e-mail to Chainz, I think they will process the upgrade to Evo.