[XPM]unofficial jhPrimeminer thread

[rdebourbon]

So are these good speeds for an I5-3570k running at stock? What measures should I be using to compare to see if I am doing a bad job or not? Anywhere I can look to compare various processors, for example mine vs an FX8350?

Looks pretty decent to me.. Only change I would consider is a higher primorial.. Your cpu is more than capable of dealing with the higher numbers at a good rate.. Try add -m 61 to your commandline

[1714261982]

1714261982

[1714261982]

1714261982

[1714261982]

1714261982

[1714261982]

1714261982

[ssl303]

Yes, actually.. This is on the cards.. tandy now has write access to my repository on github, so I expect that as we go forward the two forks will merge into one..

That would be amazing!  can't wait!!! Do you have any estimate on how soon they would merge? Few days, weeks, months?

[ssl303]

rdebourbon, can your jhprimeminer be compiled in Ubuntu directly?
If so, what are the dependencies and where can I get the latest source? The latest source on the git is in September.

[belltown]

Any news about what's go in on with ypool? Front end is down for days now...

[belltown]

Let me answer my own question.

YPool is back. Just in time when breeeer went down;) The site has totally new design. But https is broken. So you need to go to http://ypool.net to see the new site, not https://ypool.net  

[balanghai]

Is there hope for the GPU miner?

[hak8or]

So are these good speeds for an I5-3570k running at stock? What measures should I be using to compare to see if I am doing a bad job or not? Anywhere I can look to compare various processors, for example mine vs an FX8350?

Looks pretty decent to me.. Only change I would consider is a higher primorial.. Your cpu is more than capable of dealing with the higher numbers at a good rate.. Try add -m 61 to your commandline

Thanks, will do so!

[ssl303]

I can't get -xpm option to work. Here is what I get.
Connecting to 'X.X.X.X' (X.X.X.X)
Using 8 threads
Username: XXX
Password: XXX
Using GetBlockTemplate protocol
UpdateWork(GetBlockTemplate) failed.
I use primecoin-0.1.2-hp11 on ubuntu.
Client is jhPrimeminer_RdBBeta4.0F2_x64-AVX.

[ssl303]

Never mind, I forgot to add the client to the allow host. Sorry about that.

[Transcend]

jhPrimeMiner.exe -o http://ypool.net:10034 -u workername -p workerpass -m 61 -target 9 -bttarget 9

Is best for an I5 processor.

What settings would be best for an q6600 or q6700 or q9450.

Thx in advance.

[Guergana]

since what time is XPM side and server down?

[ssl303]

Can someone explain what all the numbers mean in the output?
11/12/13-14:06:18 - New Block: 257984 - Diff: 9.976105 / 9.976105
Best/Max diff: [ 9.491845 / 0.000000 ]
6ch/h:    82.33 - 917 [ 278 / 273 / 366 ]
7ch/h:     9.16 - 102 [ 41 / 24 / 37 ]
8ch/h:     1.08 - 12 [ 4 / 2 / 6 ]
9ch/h:     0.09 - 1 [ 1 / 0 / 0 ]
MNPS:452.38   PPS:35426        WPS:17.673   ACC:2004
Current Primorial: 61 - Sieve Size: 1651500 - Prime Count: 46834
So many numbers! Which number determines how fast I'd find a block?
The prime coin mining calculator asks for chain per day. How would I find that number from these?

[Gundamcoin]

today ypool went down briefly and the miner was still running

so there wasn't a connection and it was trying to reconnect, but still running and a few shares found but lost, said shares were not accepted by server or something like that.

so i was wondering if I could make it so that it stops mining but tries to reconnect, seems a waste to use the power and gain nothing.  or were those shares found right as it lost connection?

aerocloud t13 beta, running 6 core of amd 8320


btw, what does type mean, type:1/ type:3

[mindragon]

Ypool's server is down due to hardware failure. ETA 12 hours from now for repair.

[bitcoin_builder]

Ypool's server is down due to hardware failure. ETA 12 hours from now for repair.

I am using jhPrimeminer on 64 bit machine and it was working fine until the crash of ypool.net
Now as per their instruction I am connecting to port 8081 with option "-xpt" but the program says "-xpt is an unknown option.

How to make it work?

[digit]

Are there any optimized 32bit versions?

[ssl303]

I'm not sure if -xpm option is working or not.
I have connected three computers to my server using -xpm option.
jhprimeminer -o http://server.address:9912 -u username -p password -m 61 -target 9 -bttarget 9 -xpm coinaddress
Total pps is around 79000 all together. I ran for a week, but never found a block.
Also, when I used to pool mine, I'd see something like it found some chains once in a while, but I never seen that message since soloing.
Can someone look into this?

[ssl303]

Is there way to run it in background on Windows?

[bitcoin_builder]

I'm not sure if -xpm option is working or not.
I have connected three computers to my server using -xpm option.
jhprimeminer -o http://server.address:9912 -u username -p password -m 61 -target 9 -bttarget 9 -xpm coinaddress
Total pps is around 79000 all together. I ran for a week, but never found a block.
Also, when I used to pool mine, I'd see something like it found some chains once in a while, but I never seen that message since soloing.
Can someone look into this?

Are you running it on Windows or Linux?
If Windows then which version?
Because I was using it on 64 bit Windows until the crash of ypool and now it doesn't work even with -xpt option. I even tried this -xpm option but no luck.

[ssl303]

Are you running it on Windows or Linux?
If Windows then which version?
Because I was using it on 64 bit Windows until the crash of ypool and now it doesn't work even with -xpt option. I even tried this -xpm option but no luck.

Both windows 64-bit and Linux 64-bit using wine.
I use the latest version from the dropbox link from previous post.