Zeek_W
|
|
November 30, 2013, 02:38:54 PM |
|
I mean they should 'work out of the box' plus the 'omg wait everyone, the scrolls don't work at all' thing is just great.
Wondering if my batch 1 board will be shipped with everyone elses (and arrive after the US ones - buy local LOL)
in fact didn't you say you were tired of waiting and sold at least one board? Barntech blocked that deal.
|
|
|
|
chadtn
|
|
November 30, 2013, 03:30:05 PM |
|
I fell asleep and when I woke up I had a second board go dead on me. It doesn't power up anymore. Not sure what to do.
Chad
I guess the only thing that you can do now is to completely disconnect that board, let it cool down (edit: letting the polyswitches reset themselves, if they exist, sounds like a good idea), then try it again (ideally in an isolated environment with its own supply, pc etc.). Do you have reasonable cooling? Good luck Right now the ambient temp is close to 0C. The board is ice cold, but doesn't power up anymore. It was sharing a 120mm fan with a second board. Chad Bugger. i'd give it at least a few hours before declaring it totally dead. I just tried putting power to the board that wasn't working anymore and something went up in smoke. It's dead for sure. : ( Chad
|
|
|
|
r00t$
Member
Offline
Activity: 117
Merit: 10
|
|
November 30, 2013, 03:43:30 PM |
|
Yikes.
I have 1 board that went ZOMBIE as well, and now no green light. I've tried a completely different PC, PSU, USB cable, in/out of the miniplane..no dice..no green light
I am waiting until we get an official answer from the appropriate parties to continue my troubleshooting.
|
|
|
|
aminorex
Legendary
Offline
Activity: 1596
Merit: 1029
Sine secretum non libertas
|
|
November 30, 2013, 03:52:47 PM |
|
4 boards: 1 went south, no LED, in about 4 minutes. Another went south, no LED, in about 3 hours. Two more went south (one with LED lit) after running overnight. In that case, I changed some unrelated USB devices, and they went ZOMBIE, so I powered down, waited 5 minutes, and powered up. Neither will detect any longer.
Definitely seems to be a power component failure. Pretty much every board will fail within a day or two, I suspect.
|
Give a man a fish and he eats for a day. Give a man a Poisson distribution and he eats at random times independent of one another, at a constant known rate.
|
|
|
erk
|
|
November 30, 2013, 03:54:44 PM |
|
4 boards: 1 went south, no LED, in about 4 minutes. Another went south, no LED, in about 3 hours. Two more went south (one with LED lit) after running overnight. In that case, I changed some unrelated USB devices, and they went ZOMBIE, so I powered down, waited 5 minutes, and powered up. Neither will detect any longer.
Definitely seems to be a power component failure. Pretty much every board will fail within a day or two, I suspect.
I thought they were being tested before shipment, I guess not very well.
|
|
|
|
Barntech (OP)
|
|
November 30, 2013, 04:13:35 PM |
|
Hey guys.
Ok, so there's some weird stuff going on. We're doing everything we can to get this sorted as quick as we can. Bare with us. So sorry that things aren't working as they should. Will update you as soon as we have something.
Barntech
|
|
|
|
Zeek_W
|
|
November 30, 2013, 04:14:10 PM |
|
Fingers crossed all boards aren't zombies.
What is warranty recourse if so Barntech? Not hating or sending 'bad vibes', just want to know.
(typed while barn was doing above reply - not being a dick)
|
|
|
|
thegoldbug
Member
Offline
Activity: 90
Merit: 10
|
|
November 30, 2013, 04:28:02 PM Last edit: November 30, 2013, 05:12:48 PM by thegoldbug |
|
I have 8 - Eight boards, two of them lost the green light early in the startup/setup process yesterday evening. I had six working late last night for a while, lost another to the "green ghost failure" latter last night. I had 5 boards running about 1 hour ago and checking on them I see that another board has failed.
I'm down to 4 working boards and those are hashing around 18.x GH/s using default settings of 40:1:850 on Windows 7 computer.
All 5 of my drillbit thumbs are still working although one is significantly under performing.
|
|
|
|
Zeek_W
|
|
November 30, 2013, 04:37:51 PM |
|
Just so I know what I am looking at, who has 8boards with NO issues?
|
|
|
|
chadtn
|
|
November 30, 2013, 04:43:42 PM |
|
Just so I know what I am looking at, who has 8boards with NO issues?
I've got one out of four that is still working perfectly. One burned up in a puff of smoke this morning, one hashes full speed, but puts out three times as many hw errors as it does accepted shares. One is still hashing, but acts like it has chips going out. It was hashing at 21+ gigahashes and now it's down to 15 with a bunch of asic time out errors. Chad
|
|
|
|
Zeek_W
|
|
November 30, 2013, 04:48:17 PM |
|
Just so I know what I am looking at, who has 8boards with NO issues?
I've got one out of four that is still working perfectly. One burned up in a puff of smoke this morning, one hashes full speed, but puts out three times as many hw errors as it does accepted shares. One is still hashing, but acts like it has chips going out. It was hashing at 21+ gigahashes and now it's down to 15 with a bunch of asic time out errors. Chad Fuck! Hope you get some answers/solutions
|
|
|
|
eman5oh
Newbie
Offline
Activity: 57
Merit: 0
|
|
November 30, 2013, 05:10:07 PM |
|
I'll sit back and wait at this point because that is all I can do. I believe at this point this is a hardware issue and firmware will not be able to fix the damage that has been done. We shall see what Barntech and his team comes up with to resolve the issues. I hope that the boards can be repaired at this point and are not paperweights.
|
|
|
|
rocks
Legendary
Offline
Activity: 1153
Merit: 1000
|
|
November 30, 2013, 05:44:45 PM |
|
Just so I know what I am looking at, who has 8boards with NO issues?
My one drillbit 8 board hashed away stable all night at 18.5Gh/s with int:52:2:850 settings, board has one high speed fan on the heatsink side and is cool to the touch. Given that a few people are reporting power issues, my inclination is to keep using the lower power 850 settings until we know more.
|
|
|
|
ryanb
Legendary
Offline
Activity: 1148
Merit: 1000
|
|
November 30, 2013, 05:57:45 PM |
|
now my last board went zombie
now all my cards are zombie
all my 4 cards are dead.
|
|
|
|
aminorex
Legendary
Offline
Activity: 1596
Merit: 1029
Sine secretum non libertas
|
|
November 30, 2013, 06:07:28 PM |
|
now my last board went zombie
now all my cards are zombie
all my 4 cards are dead.
Allow me to provide haiku tips: last board a zombie now all my cards are zombie all four cards are dead
|
Give a man a fish and he eats for a day. Give a man a Poisson distribution and he eats at random times independent of one another, at a constant known rate.
|
|
|
Skriglitz
Member
Offline
Activity: 61
Merit: 10
|
|
November 30, 2013, 06:10:03 PM |
|
now my last board went zombie
now all my cards are zombie
all my 4 cards are dead.
Allow me to provide haiku tips: last board a zombie now all my cards are zombie all four cards are dead THIS deserves a thumbs up for the haiku. sucks about the boards though..
|
|
|
|
aminorex
Legendary
Offline
Activity: 1596
Merit: 1029
Sine secretum non libertas
|
|
November 30, 2013, 07:11:11 PM |
|
With a laser thermometer it should be pretty easy to identify which components are dissipating power in a zombie board. The border between the hot and cold worlds defines the space of whcih compenents are most likely failing. I have no problem desoldering and replacing any of the bits, but it's not a task I'm likely to undertake unless I'm pretty sure the fix is going to work, as it is very time-consuming. I'm hoping someone else can do the work of generating a high-probability diagnosis. I'll bust my knuckles to verify it pragmatically.
|
Give a man a fish and he eats for a day. Give a man a Poisson distribution and he eats at random times independent of one another, at a constant known rate.
|
|
|
Pistachio
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
November 30, 2013, 07:13:24 PM |
|
Three of my boards are no longer responding with a green light. The other five are unstable beyond two to five minutes. The thumb is still running fine though.
Does anyone know of a way to reset the three dead boards? If not, can I mail it back to be fixed?
My advise is don't try using a mini-plane at all and definitely do not try the double scroll. It may disable your boards.
|
|
|
|
beavertank
Member
Offline
Activity: 94
Merit: 10
.
|
|
November 30, 2013, 08:13:11 PM |
|
I just tried putting power to the board that wasn't working anymore and something went up in smoke. It's dead for sure. : (
Chad
That's scary... but at least it's the first and only magic smoke release after going "green ghost" that I've heard of. Two of my four boards are still stuck as LED-less dead weight, but the other two are hashing away stably at about 19gh/s on default settings. I thought I was unlucky yesterday, now I'm counting my blessings to have working boards at all.
|
Did I help you out, or otherwise say something useful? A handful of satoshis are a great way to say thanks! - Address: 18JUKdmE1Satf8HJUU3pf7iu5ymQX8AzER
|
|
|
forevernoob
|
|
November 30, 2013, 08:19:51 PM |
|
So is there a heat issue with these boards? Did you guys overclock, and did any of you use a fan?
|
|
|
|
|