Houseonfire
|
|
December 04, 2011, 01:20:16 AM |
|
I created a solo server on my server that hosts bithopper. Now, I added my solo server to my bithopper server but when I have it activated, it mines it all the time, non stop. How do I set it so the solo is only mined as a last resort when the other pools aren't viable at the time? Is that possible?
If you don't know what I mean, add a solo server to your bithopper and activate it.
Also, it reports zero's across the board for mHash, shares, rejects, etc. How do I make it so it reports statistics? Thanks
......................
i don't get you very well but i think you're trying to set-up solo mining there... correct me if i'm wrong in that case just use the "backup" option and you're good to go. Share reporting is not possible because you will have to install a real pool back-end that will have to count your shares and report them somehow. Share counting is really useless in this case only if you plan to hop your own server. Oooooooh. Ok. What I meant was that I put "-server" on my bitcoin-qt shortcut to open it in server mode, then I set the address to that server on my bithopper client. (Both are hosted on the same computer/ server box, which might be where I mixed you up at) Before, when I had it activated on my bithopper client, it would always be running and none of the other pools would activate. But I set "Solo" to backup in my config file and all's good in the world. Thank you very much for your help. And if you know anyone who can make bithopper plugins, can you PM me/ have them PM me please? I'd like these features on my server and I've obviously had a hard time getting them activated myself. I'm willing to pay what I can spare. Thanks
|
|
|
|
paraipan
In memoriam
Legendary
Offline
Activity: 924
Merit: 1004
Firstbits: 1pirata
|
|
December 04, 2011, 02:28:29 AM Last edit: December 19, 2011, 12:42:35 AM by paraipan |
|
I created a solo server on my server that hosts bithopper. Now, I added my solo server to my bithopper server but when I have it activated, it mines it all the time, non stop. How do I set it so the solo is only mined as a last resort when the other pools aren't viable at the time? Is that possible?
If you don't know what I mean, add a solo server to your bithopper and activate it.
Also, it reports zero's across the board for mHash, shares, rejects, etc. How do I make it so it reports statistics? Thanks
......................
i don't get you very well but i think you're trying to set-up solo mining there... correct me if i'm wrong in that case just use the "backup" option and you're good to go. Share reporting is not possible because you will have to install a real pool back-end that will have to count your shares and report them somehow. Share counting is really useless in this case only if you plan to hop your own server. Oooooooh. Ok. What I meant was that I put "-server" on my bitcoin-qt shortcut to open it in server mode, then I set the address to that server on my bithopper client. (Both are hosted on the same computer/ server box, which might be where I mixed you up at) Before, when I had it activated on my bithopper client, it would always be running and none of the other pools would activate. But I set "Solo" to backup in my config file and all's good in the world. Thank you very much for your help. And if you know anyone who can make bithopper plugins, can you PM me/ have them PM me please? I'd like these features on my server and I've obviously had a hard time getting them activated myself. I'm willing to pay what I can spare. Thanks np, you could hang out on our irc channel and i'm sure one of our coders will give you a hand if you're a generous person
|
BTCitcoin: An Idea Worth Saving - Q&A with bitcoins on rugatu.com - Check my rep
|
|
|
c00w (OP)
|
|
December 19, 2011, 12:14:16 AM |
|
@everyone who wants features added.
Just send me a PM or open an issue on github. I've just been busy and not monitoring this thread since I thought it died.
|
1HEmzeuVEKxBQkEenysV1yM8oAddQ4o2TX
|
|
|
paraipan
In memoriam
Legendary
Offline
Activity: 924
Merit: 1004
Firstbits: 1pirata
|
|
January 18, 2012, 05:30:01 AM |
|
Small vid about bitHopper on github http://goo.gl/Ydl8e in case you missed it
|
BTCitcoin: An Idea Worth Saving - Q&A with bitcoins on rugatu.com - Check my rep
|
|
|
|
callmeivan
Newbie
Offline
Activity: 33
Merit: 0
|
|
February 20, 2012, 09:36:59 PM |
|
Got a little problem, whenever a new block starts some servers start lagging and i get errors in the shell.
Does somebody know how to fix it? I am running a VM in Fusion (Ubuntu 11.10 x64).
Traceback (most recent call last): File "/usr/local/lib/python2.7/dist-packages/gevent/greenlet.py", line 390, in run result = self._run(*self.args, **self.kwargs) File "bitHopper.py", line 185, in delag_server data, headers = self.work.jsonrpc_call(server, []) ValueError: too many values to unpack <Greenlet at 0x321d0f0: <bound method BitHopper.delag_server of <__main__.BitHopper instance at 0x3193cf8>>> failed with ValueError
13:30:10|website: Error in a wsgi function 13:30:10|website: 'NoneType' object is not iterable Traceback (most recent call last): File "/home/ivan/bitHopper/website.py", line 275, in handle_start return use_site.handle(env,start_response) File "/home/ivan/bitHopper/website.py", line 284, in handle return self.bitHopper.work.handle(env, start_response) File "/home/ivan/bitHopper/work.py", line 181, in handle server, auth = self.bitHopper.getwork_store.get_server(data[0][72:136]) TypeError: 'NoneType' object is not iterable
|
|
|
|
paraipan
In memoriam
Legendary
Offline
Activity: 924
Merit: 1004
Firstbits: 1pirata
|
|
February 20, 2012, 10:08:52 PM |
|
Got a little problem, whenever a new block starts some servers start lagging and i get errors in the shell.
Does somebody know how to fix it? I am running a VM in Fusion (Ubuntu 11.10 x64).
Traceback (most recent call last): File "/usr/local/lib/python2.7/dist-packages/gevent/greenlet.py", line 390, in run result = self._run(*self.args, **self.kwargs) File "bitHopper.py", line 185, in delag_server data, headers = self.work.jsonrpc_call(server, []) ValueError: too many values to unpack <Greenlet at 0x321d0f0: <bound method BitHopper.delag_server of <__main__.BitHopper instance at 0x3193cf8>>> failed with ValueError
13:30:10|website: Error in a wsgi function 13:30:10|website: 'NoneType' object is not iterable Traceback (most recent call last): File "/home/ivan/bitHopper/website.py", line 275, in handle_start return use_site.handle(env,start_response) File "/home/ivan/bitHopper/website.py", line 284, in handle return self.bitHopper.work.handle(env, start_response) File "/home/ivan/bitHopper/work.py", line 181, in handle server, auth = self.bitHopper.getwork_store.get_server(data[0][72:136]) TypeError: 'NoneType' object is not iterable
this thread isn't watched lately but you can post your issues on gihub. I already did this for you so it can be fixed faster https://github.com/c00w/bitHopper/issues/625
|
BTCitcoin: An Idea Worth Saving - Q&A with bitcoins on rugatu.com - Check my rep
|
|
|
c00w (OP)
|
|
February 20, 2012, 11:50:24 PM |
|
The top issue is fixed. I'm not sure what is breaking with the bottom issue.
|
1HEmzeuVEKxBQkEenysV1yM8oAddQ4o2TX
|
|
|
|
Red Emerald
|
|
April 26, 2012, 10:52:30 PM |
|
Is it better to use the master branch or 0.3.2? It seems like they are being developed simultaneously.
|
|
|
|
iopq
|
|
June 03, 2012, 11:13:05 AM |
|
p2pool is my backup pool and it rejects like every share so cgminer stops feeding shares to bithopper
|
|
|
|
Red Emerald
|
|
June 03, 2012, 09:54:35 PM |
|
p2pool is my backup pool and it rejects like every share so cgminer stops feeding shares to bithopper
I believe bithopper does not like p2pool's massive amount of LPs compared to other pools. I tried asking about it here and in the IRC channel, but no one was helpful.
|
|
|
|
paraipan
In memoriam
Legendary
Offline
Activity: 924
Merit: 1004
Firstbits: 1pirata
|
|
June 03, 2012, 10:48:06 PM |
|
p2pool is my backup pool and it rejects like every share so cgminer stops feeding shares to bithopper
I believe bithopper does not like p2pool's massive amount of LPs compared to other pools. I tried asking about it here and in the IRC channel, but no one was helpful. Maybe c00w can help you guys with that, make sure you open an issue on github so he can see it, i don't think he's too active on the forum lately. Cheers
|
BTCitcoin: An Idea Worth Saving - Q&A with bitcoins on rugatu.com - Check my rep
|
|
|
iopq
|
|
June 05, 2012, 05:17:56 AM |
|
Am I doing something wrong here? What are these errors
22:14:39|bitHopper: Lagging. :slush 22:14:39|bitHopper: Lagging. :slush 22:14:41|bitHopper: Lagging. :deepbit 22:14:41|bitHopper: Lagging. :slush 22:14:42|rpcworklog: RPC request [getwork] submitted to slush 22:14:46|rpcworklog: RPC request [69c0a000] submitted to slush 22:14:47|api: bclc api error:'NoneType' object has no attribute 'group'
I get lagging for every pool I try to mine, and I get the api error for bclc btw, how am I supposed to use the pools-custom.cfg, am I supposed to copy the old one and modify it or am I supposed to just put my modifications in the new file? I chose the copy route and modified some things
|
|
|
|
enmaku
|
|
July 03, 2012, 08:28:00 PM |
|
Long time since I've been here and a lot has changed. I'm in desperate need of an update! Is there a maintained list of hoppable pools somewhere still? Also, where is the pool list from /workers pulling from compared to the pool list in /stats because I've got a lot of pools in each that aren't in the other...
|
|
|
|
freshzive
|
|
July 11, 2012, 04:40:49 AM |
|
Anyone have any idea what this means? 21:39:13|work: Not in pool Traceback (most recent call last): File "/usr/local/lib/python2.7/dist-packages/gevent/greenlet.py", line 390, in run result = self._run(*self.args, **self.kwargs) File "/home/tonic/bithopper/scheduler.py", line 40, in bitHopper_server_update self.bitHopper.server_update() File "bitHopper.py", line 174, in server_update if self.scheduler.server_update(): File "/home/tonic/bithopper/scheduler.py", line 149, in server_update if not self.server_is_valid(current): File "/home/tonic/bithopper/scheduler.py", line 76, in server_is_valid return info.is_valid() and info['role'] in self.valid_roles AttributeError: 'NoneType' object has no attribute 'is_valid' <Greenlet at 0x18455f0: <bound method DefaultScheduler.bitHopper_server_update of <scheduler.DefaultScheduler object at 0x1b4f490>>> failed with AttributeError
When I go to the /workers page after starting the pool and try to add a user for my pool, nothing happens when I click the "+". This is in Ubuntu 12.04 64bit.
|
|
|
|
Subo1977
Sr. Member
Offline
Activity: 344
Merit: 250
Flixxo - Watch, Share, Earn!
|
|
July 18, 2012, 12:13:49 PM |
|
Is the bithopper Project Alive or dead? In git the Last Weeks changed nothing. Pull request Stays Open.
|
|
|
|
c00w (OP)
|
|
July 29, 2012, 05:58:57 AM |
|
Its not completely dead. I was pretty busy this summer and didn't have a lot of time to get around to it. I've fixed p2pool in the 0.3.2 branch and I'm going to merge it into master since its the only branch I want to deal with anymore. I'm not sure about some of my other decisions regarding moving everything into a stats.db file. I'm going to try and integrate a dht into bithopper to help with the deepbit lp problem.
|
1HEmzeuVEKxBQkEenysV1yM8oAddQ4o2TX
|
|
|
c00w (OP)
|
|
July 29, 2012, 06:00:19 AM |
|
I also want to try and clean up the pool list and just streamline everything down to the bare basics. I also want to make the statistics gathering engine much more powerful so this is more useful for server owners.
|
1HEmzeuVEKxBQkEenysV1yM8oAddQ4o2TX
|
|
|
Subo1977
Sr. Member
Offline
Activity: 344
Merit: 250
Flixxo - Watch, Share, Earn!
|
|
August 04, 2012, 08:49:18 PM |
|
i install bithopper 0.3.2 on a fresh Ubuntu 11.10. with sudo apt-get install python2.7 git python2.7-dev python-setuptools python-pip libevent-dev git clone git://github.com/c00w/bitHopper.git cd bitHopper sudo python setup.py install python run.py
i got the error :
22:47:08|ServerLogic|rebuild_servers: No valid pools configured 22:47:13|ServerLogic|rebuild_servers: No valid pools configured
on the worker page i see only a black screen with the text Workers... nothing else.. I can't add a worker..
What do I Wrong?
|
|
|
|
|