unmotivatedgenius
Newbie
Offline
Activity: 12
Merit: 0
|
|
December 28, 2013, 08:55:00 PM |
|
In this case there's a problems with Currency that have multiple Markets. Struct of Portfolio value is not good to the add of Double Click I was thinking that It could open both/all markets and we could close the one we don't want. Or maybe add a setting so we could choose our preferred markets. Alternatively there could be a popup with the choice of markets or all, or a right click menu with the same options. Just some ideas. I've seen no issues with CAT Beta3 thus far that don't appear to be due to Cryptsy. Loving it.
|
|
|
|
theomoplatapus
|
|
December 28, 2013, 11:16:07 PM |
|
I think I need help...Over the past 2 days I started with .15 and am now down to .114. My reported gains total about .007. The markets I've been dealing in were primarily GDC, DMD, TGC, and recently XPM, but I initially was in several others which didn't make much of a difference.. I've been using a range of .5-1.2% min gain. I've used mostly aggressive but also normal, setting "never sell below" and "never buy/sell directly" but it doesn't seem to have made much of a difference.
|
#Bitcoin
|
|
|
Sampey (OP)
Legendary
Offline
Activity: 2632
Merit: 1040
|
|
December 28, 2013, 11:30:41 PM |
|
General Market Devaluation?
|
|
|
|
BTCMS
|
|
December 29, 2013, 01:17:33 AM |
|
I am running the new C.A.T for the last few hours, no problems so far I have 3 suggestions for future versions: - When creating an order let user change "Total" which in turn will change "quantity". This way you can easily spread your btc balance over the markets. - When I want to sell all my coins back to BTC I have to do that in each market separately using "Return all to primary currency". Would be nice to have one single button that does that automatically for all my markets I have coins in. - Perhaps more difficult, but every time I want to start a market I keep on refreshing the current status until % difference between max buy and sell is what I desire and then I issue my order. Perhaps C.A.T could issue my order automatically when the market hits the preferred % difference.
|
|
|
|
Sampey (OP)
Legendary
Offline
Activity: 2632
Merit: 1040
|
|
December 29, 2013, 01:23:01 AM |
|
I am running the new C.A.T for the last few hours, no problems so far I have 2 suggestions for future versions: - When creating an order let user change "Total" which in turn will change "quantity". This way you can easily spread your btc balance over the markets. - Perhaps more difficult, but every time I want to start a market I keep on refreshing the current status until % difference between max buy and sell is what I desire and then I issue my order. Perhaps C.A.T could issue my order automatically when the market hits the preferred % difference. 1 - I will add to the TO DO LIST 2 - Too Risky sometimes API call return orders that are processed in that moment (this is the reason for the Max Buy > Min Sell). There's no need to get the % You want from the CHECK Button, you can always submit Ping Orders with the % you want
|
|
|
|
Sampey (OP)
Legendary
Offline
Activity: 2632
Merit: 1040
|
|
December 29, 2013, 01:41:48 AM |
|
1 - I will add to the TO DO LIST
Done (I mean, done the Code)
|
|
|
|
BTCMS
|
|
December 29, 2013, 01:52:34 AM |
|
I am running the new C.A.T for the last few hours, no problems so far I have 2 suggestions for future versions: - When creating an order let user change "Total" which in turn will change "quantity". This way you can easily spread your btc balance over the markets. - Perhaps more difficult, but every time I want to start a market I keep on refreshing the current status until % difference between max buy and sell is what I desire and then I issue my order. Perhaps C.A.T could issue my order automatically when the market hits the preferred % difference. 1 - I will add to the TO DO LIST 2 - Too Risky sometimes API call return orders that are processed in that moment (this is the reason for the Max Buy > Min Sell). There's no need to get the % You want from the CHECK Button, you can always submit Ping Orders with the % you want Thank you Ah no problem about point 2, i'll insert them manually I edited my post to add another suggestion, perhaps you did not see it; - When I want to sell all my coins back to BTC I have to do that in each market separately using "Return all to primary currency". Would be nice to have one single button that does that automatically for all my markets I have coins in.
|
|
|
|
BTCMS
|
|
December 29, 2013, 02:22:26 AM |
|
I set the "sell all if % with ref price is" at -7% However right now: 2013-12-29 03:19:17| Cannot Reorder Sell Price Calculated is 0.00003861 Reference Price Is 0.00004246 2013-12-29 03:19:17| PONG-24003732 : Sell 12.01059821@0.00004327 Current 12.01059821 | Order Status Not Changed No Condition For Retry Calculation. Shouldn't this mean that C.A.T would sell because it is lower then -7%?
|
|
|
|
Sampey (OP)
Legendary
Offline
Activity: 2632
Merit: 1040
|
|
December 29, 2013, 02:34:08 AM |
|
I set the "sell all if % with ref price is" at -7% However right now: 2013-12-29 03:19:17| Cannot Reorder Sell Price Calculated is 0.00003861 Reference Price Is 0.00004246 2013-12-29 03:19:17| PONG-24003732 : Sell 12.01059821@0.00004327 Current 12.01059821 | Order Status Not Changed No Condition For Retry Calculation. Shouldn't this mean that C.A.T would sell because it is lower then -7%? I will check for this, a voice in my mind tells me that the problem isn't resolved yet..... Order Calculation is the difficult part of C.A.T. . Sorry
|
|
|
|
BTCMS
|
|
December 29, 2013, 10:33:55 AM |
|
I will check for this, a voice in my mind tells me that the problem isn't resolved yet..... Order Calculation is the difficult part of C.A.T. . Sorry The same problem occurs with other coins. If you select "sell all if price goes under" it works. Its only the % option that fails. I really hope you can fix this.
|
|
|
|
oswald
Member
Offline
Activity: 67
Merit: 10
|
|
December 29, 2013, 11:40:04 AM |
|
my experience using "Return all to primary currency" is selling my coin at my last sell order, not at currently running price, so it takes 5-6 hour to complete all market
at first I thought it is going to cancel all my buy and sell order, then after all order canceled and return to available balance, it going to sell all available balance at currently running price, which in my experience the coin sold faster
I know selling at currently running price can be loss in gain, but I want my all btc back after 24 hours trading
|
|
|
|
Sampey (OP)
Legendary
Offline
Activity: 2632
Merit: 1040
|
|
December 29, 2013, 12:26:50 PM |
|
I know selling at currently running price can be loss in gain, but I want my all btc back after 24 hours trading
I think that solution is to sell via Cryptsy, too risky sell all at Market Price without any Human interaction. With this option C.A.T. will continue guaranteed your % Gain without creating any new orders.
|
|
|
|
megaplage
Member
Offline
Activity: 320
Merit: 10
|
|
December 29, 2013, 12:48:23 PM |
|
Hi Luca,
just in case You havn't got already this error message :
2013-12-28 20:02:21 - Error Parsing Time Stamp, Input String :2013-12-27 06:43:25 2013-12-27 08:53:14 - Error Parsing Time Stamp, Input String :2013-12-27 06:43:47 2013-12-27 06:43:17 - Error Parsing Time Stamp, Input String :2013-12-22 13:17:38 2013-12-22 10:07:38 - Error Parsing Time Stamp, Input String :2013-12-26 10:21:15 2013-12-28 18:47:26 - Error Parsing Time Stamp, Input String :2013-12-25 04:02:54 2013-12-24 22:09:32 - Error Parsing Time Stamp, Input String :2013-12-27 12:54:16
|
|
|
|
Sampey (OP)
Legendary
Offline
Activity: 2632
Merit: 1040
|
|
December 29, 2013, 12:53:15 PM |
|
Yeah no problem, false positive, it's only a parsing error on a field that CAT doesn't use during Lookup
|
|
|
|
Sampey (OP)
Legendary
Offline
Activity: 2632
Merit: 1040
|
|
December 29, 2013, 03:32:03 PM |
|
Currently working on a "System" folder to store all Gain&Errors And maybe on a way to start CAT without use the BAT File
|
|
|
|
BTCMS
|
|
December 29, 2013, 05:07:46 PM |
|
Running 15 markets for 20 hours, 7 markets have been frozen/stuck for a couple of hours.. Red status and nothing in the error log. Do I have to manually close the market and start again? Ofcourse then I have to cancel outstanding orders otherwise I do not have any coins.
|
|
|
|
Sampey (OP)
Legendary
Offline
Activity: 2632
Merit: 1040
|
|
December 29, 2013, 05:18:54 PM |
|
Running 15 markets for 20 hours, 7 markets have been frozen/stuck for a couple of hours.. Red status and nothing in the error log. Do I have to manually close the market and start again? Ofcourse then I have to cancel outstanding orders otherwise I do not have any coins.
Yes. I'm currently work on the % Problems. This is what happens : a Rule occurs (and Win) Before the % -X Rules. In the next version i will remove the first rules. For the Frozen Markets, in the next version there will be a Timer instead of Thread, i think i can resolve the Frozen Error (That actually i don't know the cause). If Timer will not resolve frozen problems, i have another idea (A Super-Timer that check each Markets and identify the Frozen One.)
|
|
|
|
Sampey (OP)
Legendary
Offline
Activity: 2632
Merit: 1040
|
|
December 29, 2013, 06:13:46 PM |
|
New function on next version : You can Manage Log FOlder (Logs->Gain + Logs-> Error). There will be a default RootLogs (or you can change after Login Procedure) I will run a test now. If everything goes well i could release Beta3V2
|
|
|
|
BTCMS
|
|
December 29, 2013, 07:22:17 PM |
|
Running 15 markets for 20 hours, 7 markets have been frozen/stuck for a couple of hours.. Red status and nothing in the error log. Do I have to manually close the market and start again? Ofcourse then I have to cancel outstanding orders otherwise I do not have any coins.
Yes. I'm currently work on the % Problems. This is what happens : a Rule occurs (and Win) Before the % -X Rules. In the next version i will remove the first rules. For the Frozen Markets, in the next version there will be a Timer instead of Thread, i think i can resolve the Frozen Error (That actually i don't know the cause). If Timer will not resolve frozen problems, i have another idea (A Super-Timer that check each Markets and identify the Frozen One.) Thanks, Hope next release will fix these problems.
|
|
|
|
Sampey (OP)
Legendary
Offline
Activity: 2632
Merit: 1040
|
|
December 29, 2013, 07:24:25 PM |
|
Running 15 markets for 20 hours, 7 markets have been frozen/stuck for a couple of hours.. Red status and nothing in the error log. Do I have to manually close the market and start again? Ofcourse then I have to cancel outstanding orders otherwise I do not have any coins.
Yes. I'm currently work on the % Problems. This is what happens : a Rule occurs (and Win) Before the % -X Rules. In the next version i will remove the first rules. For the Frozen Markets, in the next version there will be a Timer instead of Thread, i think i can resolve the Frozen Error (That actually i don't know the cause). If Timer will not resolve frozen problems, i have another idea (A Super-Timer that check each Markets and identify the Frozen One.) Thanks, Hope next release will fix these problems. Now i'm running CAT to test this. Result seems OK, i have set -0.01 in 5 markets and algo worked! Next release is today o tomorrow
|
|
|
|
|