[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[primouno]

If some people with scrypt asics could connect to the pool(http://cryptotrain.net) and just let me know how it goes?

I have updated the stratum's once again to try and help compensate for miners with less of an ability to deal with low difficulties.

Hey CT when are you going to launch european servers, do you have any specific dates? I wonder if this can influence my average hashrate I mean in plus of course because I leave in Europe

Hey Prouno, I will eventually launch the european servers, but that's another dedicated server each month I'll have to find money for :/, upwards of 100 USD a month :/

For now I might setup a low latency VPN and just setup a tcp proxy. That will reduce latency for the european miners but still doesn't provide any redundancy yet.

I don't mind waiting, just asking Hopefully you gather enough money for european servers. I keep my fingers crossed for you

[longyenthanh]

1 of my mining rigs sometime showing "dead" when mining at multipool  

[cryptotrain-net]

1 of my mining rigs sometime showing "dead" when mining at multipool  

Can you post your configuration.

[longyenthanh]

1 of my mining rigs sometime showing "dead" when mining at multipool  

Can you post your configuration.

timeout /t 25
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
set GPU_MAX_ALLOC_PERCENT=100
sgminer --algorithm darkcoin-mod -o stratum+tcp://stratum.cryptotrain.net:3332 -u xxxxxxxxxxxxxxxxxxxxx -p x -w 128 -I 19 -g 1 --thread-concurrency 8193 --gpu-reorder --gpu-engine 1150 --gpu-memclock 1500 --gpu-fan 100 --queue 0 --no-submit-stale --scan-time 1 -s 1 -E 1 -Q 0 --lookup-gap 2 --api-listen --api-allow W:127.0.0.1 --gpu-threads 2

It just happened today 

[cryptotrain-net]

1 of my mining rigs sometime showing "dead" when mining at multipool  

Can you post your configuration.

timeout /t 25
set PATH=%PATH%;./dlls
set TERMINFO=.\dlls\terminfo
set GPU_MAX_ALLOC_PERCENT=100
sgminer --algorithm darkcoin-mod -o stratum+tcp://stratum.cryptotrain.net:3332 -u xxxxxxxxxxxxxxxxxxxxx -p x -w 128 -I 19 -g 1 --thread-concurrency 8193 --gpu-reorder --gpu-engine 1150 --gpu-memclock 1500 --gpu-fan 100 --queue 0 --no-submit-stale --scan-time 1 -s 1 -E 1 -Q 0 --lookup-gap 2 --api-listen --api-allow W:127.0.0.1 --gpu-threads 2

It just happened today 

I have a feeling your thread-concurrency should be 8192 not 8193.

Try using port 4444 instead?

[longyenthanh]

after a couple minutes

http://i1343.photobucket.com/albums/o788/TiSuaNhoc87/f1_zps4e1f95d9.png

[cryptotrain-net]

http://i1343.photobucket.com/albums/o788/TiSuaNhoc87/f_zps528b51e5.jpg

after a couple minutes

http://i1343.photobucket.com/albums/o788/TiSuaNhoc87/f1_zps4e1f95d9.png

Hmm, try port 4444, But that looks like your connection to the server, where are you geographically located?

[longyenthanh]

after a couple minutes

http://i1343.photobucket.com/albums/o788/TiSuaNhoc87/f1_zps4e1f95d9.png

Hmm, try port 4444, But that looks like your connection to the server, where are you geographically located?

only 1 of 6 has this issue. It's ok now. Thank you. I changed to port 4444  I'm in the U.S

[cryptotrain-net]

http://i1343.photobucket.com/albums/o788/TiSuaNhoc87/f_zps528b51e5.jpg

after a couple minutes

http://i1343.photobucket.com/albums/o788/TiSuaNhoc87/f1_zps4e1f95d9.png

Hmm, try port 4444, But that looks like your connection to the server, where are you geographically located?

only 1 of 6 has this issue. It's ok now. Thank you. I changed to port 4444   I'm in the U.S

Yeah server is located direct middle of Kansas City Internet Exchange. Literally has an enormous amount of bandwidth. So It couldn't of been congestion.

Maybe it was just a dodgy connection for half a minute? Random stuff!. I'm currently setting up a proxy for europe so we will have a backup server to connect to shortly.

[longyenthanh]

Can you estimate how many UTC do I receive If I use ~70mh/s to mine x11? If I mine @ultrapool with 6 rigs, im gonna receive~ 1700utc/day, but only 1200utc @multipool. Maybe I have to wait for 48hours?

[cryptotrain-net]

Can you estimate how many UTC do I receive If I use ~70mh/s to mine x11? If I mine @ultrapool with 6 rigs, im gonna receive~ 1700utc/day, but only 1200utc @multipool. Maybe I have to wait for 48hours?

If you are only losing 500UTC in 24 hours whilst mining with x11, you sir are making A LOT of profit...

Like, A LOT. x11 uses ~50% less power than scrypt-jane(chacha). So you are saving a lot on your power bill. But yes, It will take about 3 days for you to start getting an Idea of an average payout figure.

On A side note, I see some previous bag holders are opening their bags since the 3k+ price jump. It's good to see, the coins need to flow in order to increase in value.

[lenhi426]

Can you estimate how many UTC do I receive If I use ~70mh/s to mine x11? If I mine @ultrapool with 6 rigs, im gonna receive~ 1700utc/day, but only 1200utc @multipool. Maybe I have to wait for 48hours?

If you are only losing 500UTC in 24 hours whilst mining with x11, you sir are making A LOT of profit...

Like, A LOT. x11 uses ~50% less power than scrypt-jane(chacha). So you are saving a lot on your power bill. But yes, It will take about 3 days for you to start getting an Idea of an average payout figure.

On A side note, I see some previous bag holders are opening their bags since the 3k+ price jump. It's good to see, the coins need to flow in order to increase in value.

pleasea online IRC chat
Today I see no problem paying. I'm online IRC proposal to ask

[rapture333]

Hmmm, how come my averages for X11 hashrate seem inconsistant? On one day it is 9Mh/s, another 11Mh/s and today 9.8Mh/s. Is this just an average? My miner averages me at about 13Mh/s.

http://www.cryptotrain.net/myworker/UQ6ouaEKao9gWdonx4mNBEAQ3kkc3obzXR

[cryptotrain-net]

Hmmm, how come my averages for X11 hashrate seem inconsistant? On one day it is 9Mh/s, another 11Mh/s and today 9.8Mh/s. Is this just an average? My miner averages me at about 13Mh/s.

http://www.cryptotrain.net/myworker/UQ6ouaEKao9gWdonx4mNBEAQ3kkc3obzXR

Hey Rapture, that is your average hashrate for shares that were confirmed. Not your total submitted shares, x11 Coins have quite a long confirmation time and this means that blocks from a previous shift will flow on into the next shifts payout. Hence the unstable hashrate. I will soon remove this hashrate calculation because it is rather irrelevant in regards to shifts. I will be updating the graphs and miner stats page tonight. Everything will look much nicers hopefully!

[rapture333]

Hmmm, how come my averages for X11 hashrate seem inconsistant? On one day it is 9Mh/s, another 11Mh/s and today 9.8Mh/s. Is this just an average? My miner averages me at about 13Mh/s.

http://www.cryptotrain.net/myworker/UQ6ouaEKao9gWdonx4mNBEAQ3kkc3obzXR

Hey Rapture, that is your average hashrate for shares that were confirmed. Not your total submitted shares, x11 Coins have quite a long confirmation time and this means that blocks from a previous shift will flow on into the next shifts payout. Hence the unstable hashrate. I will soon remove this hashrate calculation because it is rather irrelevant in regards to shifts. I will be updating the graphs and miner stats page tonight. Everything will look much nicers hopefully!

Thank you that's what I was assuming! Interesting to hear it flows over onto the next shift. Good to know, thanks!

[primouno]

@cryptotrain-net
Is it better to use port 3332 or 4444 when mining x11? Or maybe it doesn't matter? I live in Europe (Poland to be specific).

[cryptotrain-net]

@cryptotrain-net
Is it better to use port 3332 or 4444 when mining x11? Or maybe it doesn't matter? I live in Europe (Poland to be specific).

They both point to the exact same server, Just in some countries, port 4444 is blocked whether 3332 is not

[cryptotrain-net]

Hmmm, how come my averages for X11 hashrate seem inconsistant? On one day it is 9Mh/s, another 11Mh/s and today 9.8Mh/s. Is this just an average? My miner averages me at about 13Mh/s.

http://www.cryptotrain.net/myworker/UQ6ouaEKao9gWdonx4mNBEAQ3kkc3obzXR

Hey Rapture, that is your average hashrate for shares that were confirmed. Not your total submitted shares, x11 Coins have quite a long confirmation time and this means that blocks from a previous shift will flow on into the next shifts payout. Hence the unstable hashrate. I will soon remove this hashrate calculation because it is rather irrelevant in regards to shifts. I will be updating the graphs and miner stats page tonight. Everything will look much nicers hopefully!

Thank you that's what I was assuming! Interesting to hear it flows over onto the next shift. Good to know, thanks!

Yeah, It's just a way of ensuring everyone gets paid for what they do.

If you stop mining on day 3, you will probably still get a payout on day 4 and maybe even day 5. Simply because of unconfirmed shares you had.

As the hashrate increases this will be less persistent.

[NDW467]

Can you estimate how many UTC do I receive If I use ~70mh/s to mine x11? If I mine @ultrapool with 6 rigs, im gonna receive~ 1700utc/day, but only 1200utc @multipool. Maybe I have to wait for 48hours?

If you are only losing 500UTC in 24 hours whilst mining with x11, you sir are making A LOT of profit...

Like, A LOT. x11 uses ~50% less power than scrypt-jane(chacha). So you are saving a lot on your power bill. But yes, It will take about 3 days for you to start getting an Idea of an average payout figure.

On A side note, I see some previous bag holders are opening their bags since the 3k+ price jump. It's good to see, the coins need to flow in order to increase in value.

Yeah, someone is pretty determined to keep the price down. I wonder how much they'll lose before it's all over though.

[cryptotrain-net]

SHA256 has been enabled, Port 5555.

Let me know how it goes!