[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[bumface]

Would it be possible to limit the stratum connections to Nitro1 and force a failover? 

But then nitro 2 will have over 50%.....same problem

most problems will be fixed after all wallet updates are done,

[jakiman]

bumface - I think you should really update the OP if you want people to know about your updates here.

NEWS UPDATE section right up the top would be good.
(or point them to the news page in the main web site)

[bumface]

Phase 1 of the wallet update is complete!

This update is not mandatory but highly recommended.....

The following points have been adressed in this update:

phase 1: Checkpoints, stake modifiers and splash build error.

Increased version to 1.0.1.0 and updated minimum protocol version

I have tested this new build and it communicates with the old chain, you can send UTC from and to an un-updated wallet.




Once you delete everything except the wallet.dat file from the ultracoin folder, start the new client,the new client then updates the chain and the wallet

Step 1 : Type %appdata% in the windows search box (you see it when you click the start button)

Step 2 : Find the ultracoin folder

Step 3 : Copy the wallet.dat into a backup folder, do NOT delete or cut it!

Step 4 : Delete everything in the appdata/ultracoin, but DO NOT DELETE THE WALLET.DAT

Step 5 : Download this file http://www.speedyshare.com/SdmKg/ultracoin-1.0.1.0-windows-qt.rar

Step 6 : Extract the folder from the download somewhere,now drag the Ultracoin-qt.exe from the new download into your normal wallet folder (not into the  
            appdata/ultracoin folder but your wallet folder)

Step 7 : Click yes when it asks do you want to replace the file.

Step 8 : Start the wallet,it will now download the entire blockchain again (this will take some time).

DONE.

[utcminer]

Phase 1 of the wallet update is complete!

This update is not mandatory but highly recommended.....

The following points have been adressed in this update:

phase 1: Checkpoints, stake modifiers and splash build error.

Increased version to 1.0.1.0 and updated minimum protocol version

I have tested this new build and it communicates with the old chain, you can send UTC from and to an un-updated wallet.




Once you delete everything except the wallet.dat file from the ultracoin folder, start the new client,the new client then updates the chain and the wallet

Step 1 : Type %appdata% in the windows search box (you see it when you click the start button)

Step 2 : Find the ultracoin folder

Step 3 : Copy the wallet.dat into a backup folder, do NOT delete or cut it!

Step 4 : Delete everything in the appdata/ultracoin, but DO NOT DELETE THE WALLET.DAT

Step 5 : Download this file http://www.speedyshare.com/SdmKg/ultracoin-1.0.1.0-windows-qt.rar

Step 6 : Extract the folder from the download somewhere,now drag the Ultracoin-qt.exe from the new download into your normal wallet folder (not into the  
            appdata/ultracoin folder but your wallet folder)

Step 7 : Click yes when it asks do you want to replace the file.

Step 8 : Start the wallet,it will now download the entire blockchain again (this will take some time).

DONE.

good job

[reflexmk]

+1 good job

[wing_hk]

Nice 

Any details for "Stake modifier" ?

[MasterCATZ]

I have decided I will pay more BTC towards Dev fund how ever in return for UTC coin

Anyone that was wanting to Donate BTC this is what I am thinking about doing

I will Buy UTC at half price from you and give the Dev's the normal BTC value

This means I will be paying 1.5x price for the UTC Coin
This way your BTC Donation will only affect your pocket half as much!! 

ie )
Taken from the Top of http://ultracoin.net
Last    0.00011 Low 0.000109 High 0.000122    Volume (BTC) 42.06787545

If you were to sell me 1000 UTC and we were trading at 0.000122
I will pay you BTC0.061 and  BTC0.122 to the Dev

0.6 BTC collected 1.4 BTC Remaining to be raised

I will limit this offer to around 8000 coins

Trade time will be within 24 hrs,
Please Pm me if you are going to do this as it will greatly speed things up.  

My UTC Community Wallet : UNDXmqYBKQzy237v19ibPMCGxoVdwUT1TN

This is my revised deal
( if you have not already PM'd me you missed out on getting the full 0.000122 )

[xwebnetwork]

Direct Link Mirror for the Updated Wallet

Code:

http://xwebhosting.org/utc/ultracoin-1.0.1.0-windows-qt.rar

Linux and Mac iterations need to be compiled too!

[carlo63]

hi all, sry if the question has been discussed but i have no time for reading 600 pages.
I am desperate, been tried everything but cant get the damn ultracoinminer to work at -I 12 without lots of errors...
I have a gigabyte R9 270, windows 8.1 x64 - 4GB ram, catalyst 13.12 and driver version n. 13.251.0.0 of 06.12.2013

My kh/s is only 45, and I am playing with settings since one week and cannot do anything better... I must setup intensity 10!!!!! to avoid HW errors and finally the pool recognizes my work but at a very low speed, about 18/19 kh.

My settings are:

setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra2.nitro.org:4337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -I 12 -g 2 -w 256 --gpu-powertune 20 --gpu-memclock 1250 --gpu-engine 1040 --temp-target 70 --auto-fan --gpu-fan 35-85 --temp-cutoff 84 --temp-overheat 79 --gpu-threads 2 -Q 0 -s 1 -E 10 --lookup-gap 3


I changed TC to everything from 6400 to 24000... lookup gap from 0 to 3, gpu-powertune from -20 to 20... NOTHING changed.  I am just frustrated.

[Thirtybird]

hi all, sry if the question has been discussed but i have no time for reading 600 pages.
I am desperate, been tried everything but cant get the damn ultracoinminer to work at -I 12 without lots of errors...
I have a gigabyte R9 270, windows 8.1 x64 - 4GB ram, catalyst 13.12 and driver version n. 13.251.0.0 of 06.12.2013

My kh/s is only 45, and I am playing with settings since one week and cannot do anything better... I must setup intensity 10!!!!! to avoid HW errors and finally the pool recognizes my work but at a very low speed, about 18/19 kh.

My settings are:

setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra2.nitro.org:4337 -u xxx -p xxx --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -I 12 -g 2 -w 256 --gpu-powertune 20 --gpu-memclock 1250 --gpu-engine 1040 --temp-target 70 --auto-fan --gpu-fan 35-85 --temp-cutoff 84 --temp-overheat 79 --gpu-threads 2 -Q 0 -s 1 -E 10 --lookup-gap 3


I changed TC to everything from 6400 to 24000... lookup gap from 0 to 3, gpu-powertune from -20 to 20... NOTHING changed.  I am just frustrated.

You obviously didn't try everything....  You can't get the best hashrate using that miner, but this should avoid HW errors using ultracoinminer

ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 3 --thread-concurrency 52736 -I 12 -o stratum+tcp://<pool address>:<port> -u <username> -p <password> --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600

If you can't enque a scrypt buffer that high (since you only have 4 GB system memory), try

ultracoinminer --scrypt-jane --worksize 128 -g 2 --lookup-gap 3 --thread-concurrency 26368 -I 11 -o stratum+tcp://<pool address>:<port> -u <username> -p <password> --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600

you didn't say whether your card had 1 GB or 2GB - the above is assuming it's a 2GB card.  If it's a 1GB card, well.... it won't be pretty, but you can try this anyway

ultracoinminer --scrypt-jane --worksize 128 -g 1 --lookup-gap 7 --thread-concurrency 45184 -I 12 -o stratum+tcp://<pool address>:<port> -u <username> -p <password> --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600

[carlo63]

Yes the card has 2 GB:  http://www.gigabyte.com/products/product-page.aspx?pid=4840#ov

Hi Thirtybird and thx very much for answer me.  No I cannot go over TC 25000 or the driver crashes.
I would like to change miner at this point, which one would you recommend?

ps. I will buy another 4GB of ram, if this is important.

[Wirly]

Yes the card has 2 GB:  http://www.gigabyte.com/products/product-page.aspx?pid=4840#ov

Hi Thirtybird and thx very much for answer me.  No I cannot go over TC 25000 or the driver crashes.
I would like to change miner at this point, which one would you recommend?

ps. I will buy another 4GB of ram, if this is important.

Download the "yacminer" in ThirtyBirds sig.

[Beave162]

Yes the card has 2 GB:  http://www.gigabyte.com/products/product-page.aspx?pid=4840#ov

Hi Thirtybird and thx very much for answer me.  No I cannot go over TC 25000 or the driver crashes.
I would like to change miner at this point, which one would you recommend?

ps. I will buy another 4GB of ram, if this is important.

ThirtyBird am I wrong about this?... even the R9 270 is more profitable on vertcoin, yacoin (or any clone at N 14), probably wafflepool too.

[xwebnetwork]

WEBSITE UPDATES:

STYLE SHEETS
Updated text color to make it more visible. Light grey was too light

BOUNTIES
Updated according to current status

ABOUT UTC
Updated Team > Added PaulGR

WALLET
Added version number next to download button
Updated Windows Wallet and Source Code Links
Added Update description with instructions

CONFIG GENERATOR
Raw version: http://www.ultracoin.net/configgen_raw.html
>>> Did you make this ThirtyBird? Want to give credit where its due.

TODO
Finalize integration of NFactor Config Generator into UI >> Currently won't render config like the RAW version above
Update references to Scrypt Jane as Scrypt Chacha
Update services (add WhatMine.com)
Live Chat Integration
Mining Page >> Focus on YACMiner and its efficiencies

I may be forgetting something, but for now, this should suffice.

[carlo63]

Download the "yacminer" in ThirtyBirds sig.

This is Linux stuff. I dont understand.
please can you give me just ONE link with the windows version?

EDIT:  i found it

[MasterCATZ]

Direct Link Mirror for the Updated Wallet

Code:

http://xwebhosting.org/utc/ultracoin-1.0.1.0-windows-qt.rar

Linux and Mac iterations need to be compiled too!

just redirects here

http://mypageresults.com/?dn=xwebhosting.org&flrdr=yes&nxte=rar

[MasterCATZ]

Phase 1 of the wallet update is complete!

This update is not mandatory but highly recommended.....

The following points have been adressed in this update:

phase 1: Checkpoints, stake modifiers and splash build error.

Increased version to 1.0.1.0 and updated minimum protocol version

I have tested this new build and it communicates with the old chain, you can send UTC from and to an un-updated wallet.




Once you delete everything except the wallet.dat file from the ultracoin folder, start the new client,the new client then updates the chain and the wallet

Step 1 : Type %appdata% in the windows search box (you see it when you click the start button)

Step 2 : Find the ultracoin folder

Step 3 : Copy the wallet.dat into a backup folder, do NOT delete or cut it!

Step 4 : Delete everything in the appdata/ultracoin, but DO NOT DELETE THE WALLET.DAT

Step 5 : Download this file http://www.speedyshare.com/SdmKg/ultracoin-1.0.1.0-windows-qt.rar

Step 6 : Extract the folder from the download somewhere,now drag the Ultracoin-qt.exe from the new download into your normal wallet folder (not into the  
            appdata/ultracoin folder but your wallet folder)

Step 7 : Click yes when it asks do you want to replace the file.

Step 8 : Start the wallet,it will now download the entire blockchain again (this will take some time).

DONE.

can we just have torrent links ? these random file sharing services just suck ...

hell I have a seed box if you need one ...

[jakiman]

WEBSITE UPDATES:

STYLE SHEETS
Updated text color to make it more visible. Light grey was too light

BOUNTIES
Updated according to current status

ABOUT UTC
Updated Team > Added PaulGR

WALLET
Added version number next to download button
Updated Windows Wallet and Source Code Links
Added Update description with instructions

CONFIG GENERATOR
Raw version: http://www.ultracoin.net/configgen_raw.html
>>> Did you make this ThirtyBird? Want to give credit where its due.

TODO
Finalize integration of NFactor Config Generator into UI >> Currently won't render config like the RAW version above
Update references to Scrypt Jane as Scrypt Chacha
Update services (add WhatMine.com)
Live Chat Integration
Mining Page >> Focus on YACMiner and its efficiencies

I may be forgetting something, but for now, this should suffice.

Great update as always John!

I also saw a snippet of the ARB site by dcgirl. Very promising indeed.

[Rabbit80]

Not impressed by the use of speedyshare - Bundled crapware

New wallet (Windows) posted at http://ultrac.hopto.org/ultracoin-1.0.1.0-windows-qt.rar - NO CRAPWARE INSTALLER! Should be a nice fast server as well!

[bumface]

Not impressed by the use of speedyshare - Bundled crapware

New wallet (Windows) posted at http://ultrac.hopto.org/ultracoin-1.0.1.0-windows-qt.rar - NO CRAPWARE INSTALLER! Should be a nice fast server as well!

uptra upload service?