The big VTC Vertcoin settings thread

[themike5000]

I have the following 2 cards

1.ASUS 280x 245 Kh/s
2.XFX 270x 165 Kh/s

with the following config

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

del *.bin
vertminer.exe -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3361 -u xxx.xxx -p x -I 12,12 -w 256 --thread-concurrency 4196 -g 2 --gpu-memclock 1600,1500 --gpu-engine 1100,1050 --gpu-powertune 20 --temp-target 70,70 --auto-fan --gpu-fan 30-100


what am I doing wrong? or what can i improve

Look 1 post above yours and test those 270x settings.

[1715307518]

1715307518

[1715307518]

1715307518

[1715307518]

1715307518

[VincentDS]

Hey fellow vtc miners.

recently I updated my vertminer from 0.5.2 to 0.5.3. I basically deleted the 0.5.2, git cloned the 0.5.3, build it, and put the header files in AMD-ADL.
in 0.5.2 I could get 360Kh/s with my Sapphire dual-x r9 280x. Now it's only 230 with the exact same settings..

My settings:
./vertminer  -o stratum+tcp://stratum.vtcpool.co.uk:3333 -u xxxxx -p xxx -v 1 -I 13 -w 256 -g 2 --lookup-gap 2 --gpu-powertune -20 --gpu-engine 1000 --gpu-memclock 1500 --thread-concurrency 8193

Anyone knows how to solve this?

[pkjames]

Running 2 HD7950's with 280khash each.

Anyone got a tip to increase this?

Using Ati drivers 13.1

config:

,
"intensity" : "20, 20",
"vectors" : "1, 1",
"worksize" : "256, 256",
"kernel" : "scrypt",
"lookup-gap" : "2, 2",
"thread-concurrency" : "14000, 14000",
"shaders" : "1792, 1792",
"gpu-engine" : "1020, 1020",
"gpu-fan" : "0-85, 0-85",
"gpu-memclock" : "1250, 1250",
"gpu-memdiff" : "0, 0",
"gpu-powertune" : "20, 20",
"temp-cutoff" : "90, 90",
"temp-overheat" : "85, 85",
"temp-target" : "75, 75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1, 1",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "30",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

i have my sapphire dual-x 7950 @ 305khz for reducing the tc to 7168, everything else is the same as yours.

[tifozi]

Anyone have a good config for Sapphire Tri-X OC R9 290x ?

Latest vertminer from GitHub seems to crash with other 290x configs mentioned in this thread. System has 16 GB RAM (stock frequencies) and I have tried 2-3 different AMD drivers including

14.1 Beta
13.11 Beta 9.95 (Doesn't even recognize the cards)
13.12 Stable

[Mobsy]

I managed to get my 2x R9 280x vapor x working @ 375kh/s each

here are my settings:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

cgminer --scrypt -o stratum+tcp://stratum12.dogehouse.org:9091 -u x -p x -I 13 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8192 --gpu-engine 1076,1072 --gpu-memclock 1500,1500 ---temp-cutoff 85 --temp-overheat 80 --temp-target 75 --auto-fan


,
"intensity" : "13",
"worksize" : "256",
"lookup-gap" : "2",
"auto-fan" : true,
"gpu-fan" : "70-80,70-80",
"gpu-engine" : "1076,1072",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "10,10",
"thread-concurrency" : "8192",
"expiry" : "30",
"gpu-threads" : "2",
"scan-time" : "5"

Temperatures are 59 for first and 70 degrees for the second one.

Any recomandations for some risers? I can't seem to make up my mind on what I see online.

[tylerderden]

whats up everybody. I have a saphire 7870

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

cgminer --scrypt -I 12 -g 2 -w 256 --thread-concurrency 4000 --auto-fan --temp-target 70 --temp-overheat 85 --gpu-engine 925 --gpu-memclock 1325 -o stratum+tcp://vertcoinheavyindustries.com:4444 -u X -p X

anybody have one of these finicky bastages? any higher clocks and the rig freezes up.

[xtapodi]

I have the following 2 cards

1.ASUS 280x 245 Kh/s
2.XFX 270x 165 Kh/s

with the following config

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

del *.bin
vertminer.exe -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3361 -u xxx.xxx -p x -I 12,12 -w 256 --thread-concurrency 4196 -g 2 --gpu-memclock 1600,1500 --gpu-engine 1100,1050 --gpu-powertune 20 --temp-target 70,70 --auto-fan --gpu-fan 30-100


what am I doing wrong? or what can i improve

Look 1 post above yours and test those 270x settings.

how about the 280x its only running at 245..shouldnt it be running at 300?

[note235]

using 270s and can only get 5-10 in WU

Code:

{
"pools" : [
	{
		"url" : "stratum+tcp://panda.nitro.org:3338",
		"user" : "swaneon.1",
		"pass" : "pppp"
	},
	{
		"url" : "stratum+tcp://panda.nitro.org:3338",
		"user" : "swaneon.1",
		"pass" : "pppp"
	},
	{
		"url" : "stratum+tcp://panda.nitro.org:3338",
		"user" : "swaneon.1",
		"pass" : "pppp"
	}
],

"auto-fan" : true,
"gpu-engine" : "1100",
"gpu-memclock" : "1250",
"gpu-powertune" : "0",
"gpu-vddc" : "1.125",
"gpu-threads" : "2",
"temp-target" : "70",
"intensity" : "12",
"thread-concurrency" : "4448",
"worksize" : "256",
"kernel-path" : "/usr/local/bin"

}


any reason why?

[User10435]

using 270s and can only get 5-10 in WU

Code:

{
"pools" : [
	{
		"url" : "stratum+tcp://panda.nitro.org:3338",
		"user" : "swaneon.1",
		"pass" : "pppp"
	},
	{
		"url" : "stratum+tcp://panda.nitro.org:3338",
		"user" : "swaneon.1",
		"pass" : "pppp"
	},
	{
		"url" : "stratum+tcp://panda.nitro.org:3338",
		"user" : "swaneon.1",
		"pass" : "pppp"
	}
],

"auto-fan" : true,
"gpu-engine" : "1100",
"gpu-memclock" : "1250",
"gpu-powertune" : "0",
"gpu-vddc" : "1.125",
"gpu-threads" : "2",
"temp-target" : "70",
"intensity" : "12",
"thread-concurrency" : "4448",
"worksize" : "256",
"kernel-path" : "/usr/local/bin"

}


any reason why?

Try dropping your engine and increasing your memclock.

I use the following:
engine 950
memclock 1400
threads 1
tc 14144
intensity 20

That gets me 205kh/s on 1100mV 270s. Average of 1436kh/s and WU ~1336/m.

[Vampiro4L]

Trying to get some help.  Followed the linux install guide on the main forum exactly (https://bitcointalk.org/index.php?topic=404364.0). The miner is running but I can't see any GPU stats. Any suggestions?

[SnakeEater]

I managed to get my 2x R9 280x vapor x working @ 375kh/s each

here are my settings:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

cgminer --scrypt -o stratum+tcp://stratum12.dogehouse.org:9091 -u x -p x -I 13 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8192 --gpu-engine 1076,1072 --gpu-memclock 1500,1500 ---temp-cutoff 85 --temp-overheat 80 --temp-target 75 --auto-fan


,
"intensity" : "13",
"worksize" : "256",
"lookup-gap" : "2",
"auto-fan" : true,
"gpu-fan" : "70-80,70-80",
"gpu-engine" : "1076,1072",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "10,10",
"thread-concurrency" : "8192",
"expiry" : "30",
"gpu-threads" : "2",
"scan-time" : "5"

Temperatures are 59 for first and 70 degrees for the second one.

Any recomandations for some risers? I can't seem to make up my mind on what I see online.

Can share 3 more info?

1. Pool Difficulty for the Worker
2. Reject, Hardware Error, Working Unit
3. Miner version cgminer? verminer?

I notice my hashrate remains over 440kH for R290 but WU fluctuate depending on the pool difficulty for worker.  When difficulty is below 32, WU is very close to 400.  When the difficulty going up to 64,128 or even 256, the W.U. drop drastically to less than 380kH/s.

If you have 2 GPU most likely I guess your difficulty will be maximum at 256 or more and WU propably only 70% of 375x2 = 525kH/s if you are using traditional pool.

[kristofabc]

How can I set vertminer to automaticly reconnect when there is an internet connection failure.. pretty much wasted entire night because it failed to connect

[note235]

using 270s and can only get 5-10 in WU

Code:

{
"pools" : [
	{
		"url" : "stratum+tcp://panda.nitro.org:3338",
		"user" : "swaneon.1",
		"pass" : "pppp"
	},
	{
		"url" : "stratum+tcp://panda.nitro.org:3338",
		"user" : "swaneon.1",
		"pass" : "pppp"
	},
	{
		"url" : "stratum+tcp://panda.nitro.org:3338",
		"user" : "swaneon.1",
		"pass" : "pppp"
	}
],

"auto-fan" : true,
"gpu-engine" : "1100",
"gpu-memclock" : "1250",
"gpu-powertune" : "0",
"gpu-vddc" : "1.125",
"gpu-threads" : "2",
"temp-target" : "70",
"intensity" : "12",
"thread-concurrency" : "4448",
"worksize" : "256",
"kernel-path" : "/usr/local/bin"

}


any reason why?

Try dropping your engine and increasing your memclock.

I use the following:
engine 950
memclock 1400
threads 1
tc 14144
intensity 20

That gets me 205kh/s on 1100mV 270s. Average of 1436kh/s and WU ~1336/m.

thanks
i tried this but I can't get any to be accepted by the pool

i'll tip whoever can get me a working setting
using cgminer for VERT

[ieatm3s]

thanks
i tried this but I can't get any to be accepted by the pool
i'll tip whoever can get me a working setting
using cgminer for VERT

You can't get CGminer to work for Vert. You need Vertminer: https://www.dropbox.com/s/5n70hj3izjj64y1/vertminer-0.5.3.zip

[febiz]

Got over 230KH for R9 270X:

-I 13 -w 256 --thread-concurrency 6720 -g 2 --gpu-memclock 1500 --gpu-engine 1100 --gpu-powertune 20 --temp-target 70 --auto-fan --gpu-fan 30-100 --shaders 1280



If I helped, make a tip :-)

Thx mate, you saved me some time! Will send some BTC your way soon

Seems stable so far:

[Mobsy]

I managed to get my 2x R9 280x vapor x working @ 375kh/s each

here are my settings:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

cgminer --scrypt -o stratum+tcp://stratum12.dogehouse.org:9091 -u x -p x -I 13 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8192 --gpu-engine 1076,1072 --gpu-memclock 1500,1500 ---temp-cutoff 85 --temp-overheat 80 --temp-target 75 --auto-fan


,
"intensity" : "13",
"worksize" : "256",
"lookup-gap" : "2",
"auto-fan" : true,
"gpu-fan" : "70-80,70-80",
"gpu-engine" : "1076,1072",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "10,10",
"thread-concurrency" : "8192",
"expiry" : "30",
"gpu-threads" : "2",
"scan-time" : "5"

Temperatures are 59 for first and 70 degrees for the second one.

Any recomandations for some risers? I can't seem to make up my mind on what I see online.

Can share 3 more info?

1. Pool Difficulty for the Worker
2. Reject, Hardware Error, Working Unit
3. Miner version cgminer? verminer?

I notice my hashrate remains over 440kH for R290 but WU fluctuate depending on the pool difficulty for worker.  When difficulty is below 32, WU is very close to 400.  When the difficulty going up to 64,128 or even 256, the W.U. drop drastically to less than 380kH/s.

If you have 2 GPU most likely I guess your difficulty will be maximum at 256 or more and WU propably only 70% of 375x2 = 525kH/s if you are using traditional pool.

http://s28.postimg.org/mei9yoqot/bitcrush.jpg

WU varies between 650 and 750. No HW or rejects. Pool difficulty varries.

[towtol]

With Sapphire R9 290x BF ed, I'm using the below to get stable 436 KH with zero hardware error. Any other setting and tons of HW errors start coming in. I think the thread concurrency did it for me. Has to be 2816*8 for this card. Don't ask me why (though I'm a computer engineer; just not very upto speed with AMD chipset). Also I run the fan at fixed speed of 75% from Trixx to keep temperature below 75C.

setx GPU_MAX_ALLOC_PERCENT=100
setx GPU_USE_SYNC_OBJECTS=1
COLOR 0A

vertminer.exe --scrypt-vert -o <url:port> -u <user> -p <password> -I 20 --lookup-gap 2 -w 256 --gpu-engine 1000 --gpu-memclock 1500 --thread-concurrency 22528

I have the Sapphire R9 290X BF4 Ed. (53G) and I'm getting about the same hash of 440k at stock 1000/1250 (no power tune). If I try to OC @ 1100/1400, hash goes down to about 365K. This seems to be the best setting so far for mine...

vertminer.exe --scrypt-vert -o 127.0.0.1:PORT -u USERNAME -p PASSWORD --lookup-gap 2 --thread-concurrency 22528 -I 20 -g 1 -w 256

On this PC I have an i7-4770k OC'd to 45x/39x mem @1600. No change in hash with mem @ 2133.

My ASUS monitor has 2 HDMI inputs so I can go into bios, enable IGPU,  and connect HDMI out of ASRock Extreme4 mobo to HDMI(2) while HDMI out of 290x is on HDMI(1). While monitor is switched to HDMI(2) I can set fan speed to 50% via TRIXX to keep temp @ 80C and experience no video lag while mining.


My open case PC is using Sapphire 2x7950's and I'm getting about 530k (265K@) @ stock 925/1250 using...

vertminer.exe --scrypt-vert -o 127.0.0.1:PORT -u USERNAME -p PASSWORD --lookup-gap 2 --thread-concurrency 21000 -I 18 -g 1 -w 256

Still playing around with settings but seems to be stable.

[SnakeEater]

WU varies between 650 and 750. No HW or rejects. Pool difficulty varries.

Yeah I see that ... its the same for me. You notice that the Pool difficulty is not varying but increasing.  Based on your screenshot you just restarted and miner and having small shares.  First the pool difficulty start with 16 and you could have very high WU even higher than hashrate.  When it stabalize after few minutes to difficulty 128 and above the WU seems max out at 90% of Hashrate.  

Below screenshot is R9 290 Elpida.

--no-submit-stale --gpu-vddc 1 --gpu-fan 100 --gpu-engine 1000 --gpu-memclock 1500 --thread-concurrency 24000 -g 1 -I 20 --worksize 512 --gpu-powertune +20 --lookup-gap 2



It seems to me modded Vertcoin-CGMinerAleks_NR3 is more stable than buggy vertminer-0.5.2.  Verminer after crash cannot restart fresh like cgminer and need reboot Windows.

BTW vertminer options need to change --scrypt to --scrypt-vert

[GarrusV]

As a complete mining newbie, I have some questions (this is the run window: http://imgur.com/mNZFN1I):
   

• What is the hash rate?
• How often/random is the acquisition of coins?
• What is a node?

[alc]

As a complete mining newbie, I have some questions (this is the run window: http://imgur.com/mNZFN1I):
  

• What is the hash rate?
• How often/random is the acquisition of coins?
• What is a node?

Hashrate is the amount of work your card is doing. Your pool should give you an estimate on how many coins/day you can expect. You don't need to worry about nodes if you're just mining.

Also, you probably want to drop the intensity down a notch, as your miner is showing HW errors (HW: 53). This appears to be having a negative impact on your WU (work units), which is the actual indicator of work done - should be about 90% of hashrate, yours is less than half.