|
poolwaffle (OP)
|
 |
June 07, 2014, 03:53:10 AM |
|
@PW
I'm getting 3.0MHs consistent X11 with 280X which only did 730KHs on scrypt = 5X ratio ...
Good to know, thanks  The 4x is just what I had picked up from other places around the web. Eventually we'll move to client-specified (saved via cookie) for the multipliers, cause for some of you, a 120% X11 is worse than a 105% Scrypt-N, etc. |
|
|
|
|
|
utahjohn
|
|
June 07, 2014, 04:16:05 AM |
|
my calculation was off ... closer to 4.2
|
|
|
|
|
|
utahjohn
|
|
June 07, 2014, 04:26:47 AM |
|
Good to know, thanks The 4x is just what I had picked up from other places around the web. Eventually we'll move to client-specified (saved via cookie) for the multipliers, cause for some of you, a 120% X11 is worse than a 105% Scrypt-N, etc. Good idea to make it a multiplier set in cookie so I can get accurate judge of which algo to mine ... |
|
|
|
|
|
utahjohn
|
|
June 07, 2014, 05:13:49 AM
Last edit: June 07, 2014, 05:27:11 AM by utahjohn |
|
I can confirm that catalyst 14.6 beta increases hashrate on x11mod from 3.1 to 3.7 HOWEVER I am getting absolutely no shares accepted. Going back to 14.4.
EDIT: 14.4 working fine with x11mod. 14.6 beta breaks something in x11mod.cl (darkcoin.cl works on 14.6)
|
|
|
|
|
|
MTJ151
|
|
June 07, 2014, 05:36:17 AM |
|
I can confirm that catalyst 14.6 beta increases hashrate on x11mod from 3.1 to 3.7 HOWEVER I am getting absolutely no shares accepted. Going back to 14.4.
EDIT: 14.4 working fine with x11mod. 14.6 beta breaks something in x11mod.cl (darkcoin.cl works on 14.6)
Yep  See here: https://bitcointalk.org/index.php?topic=627142.0Make sure you completely remove the amd drivers when reverting back! |
|
|
|
|
|
utahjohn
|
|
June 07, 2014, 05:45:31 AM |
|
I can confirm that catalyst 14.6 beta increases hashrate on x11mod from 3.1 to 3.7 HOWEVER I am getting absolutely no shares accepted. Going back to 14.4.
EDIT: 14.4 working fine with x11mod. 14.6 beta breaks something in x11mod.cl (darkcoin.cl works on 14.6)
Yep See here: https://bitcointalk.org/index.php?topic=627142.0Make sure you completely remove the amd drivers when reverting back! I used DDU to get rid of 14.6. I fought x11mod for a day trying to get it going on 14.6 LOL. 14.6 broken |
|
|
|
|
|
poolwaffle (OP)
|
|
June 07, 2014, 05:48:50 AM |
|
I can confirm that catalyst 14.6 beta increases hashrate on x11mod from 3.1 to 3.7 HOWEVER I am getting absolutely no shares accepted. Going back to 14.4.
EDIT: 14.4 working fine with x11mod. 14.6 beta breaks something in x11mod.cl (darkcoin.cl works on 14.6)
Yep See here: https://bitcointalk.org/index.php?topic=627142.0Make sure you completely remove the amd drivers when reverting back! I used DDU to get rid of 14.6. I fought x11mod for a day trying to get it going on 14.6 LOL. 14.6 broken And i'm so glad you guys know what you're doing, because otherwise I get a ton of emails like "shits broke, fix it", and can't find the problem |
|
|
|
|
|
utahjohn
|
|
June 07, 2014, 06:00:03 AM |
|
@PW what's your threshold to enable darkcoin?
|
|
|
|
|
|
utahjohn
|
|
June 07, 2014, 07:01:00 AM |
|
I can confirm that catalyst 14.6 beta increases hashrate on x11mod from 3.1 to 3.7 HOWEVER I am getting absolutely no shares accepted. Going back to 14.4.
EDIT: 14.4 working fine with x11mod. 14.6 beta breaks something in x11mod.cl (darkcoin.cl works on 14.6)
Yep See here: https://bitcointalk.org/index.php?topic=627142.0Make sure you completely remove the amd drivers when reverting back! I used DDU to get rid of 14.6. I fought x11mod for a day trying to get it going on 14.6 LOL. 14.6 broken And i'm so glad you guys know what you're doing, because otherwise I get a ton of emails like "shits broke, fix it", and can't find the problem Clearly the problem is with the new OpenCL implementation as I had to delete all the *.bin files generated with 14.6 to get 14.4 working again ... |
|
|
|
|
|
atomicchaos
|
|
June 07, 2014, 09:44:39 AM |
|
Alright, I have about 340 Mh/s thrown at the X11 beta, lets test this puppy out... Thanks for your hard work PW!
|
BTC:113mFe2e3oRkZQ5GeqKhoHbGtVw16unnw2
|
|
|
Trevor3000
Newbie
 Offline
Activity: 10
Merit: 0
|
|
June 07, 2014, 12:18:51 PM |
|
Hi guys,
I have 4 750ti's running X11 and in another pool they all average at about 1750 khash/s (as reported by ccminer). However, in Wafflepool I get only about 1550 per gpu, with everything else in the environment exactly the same. I was wondering why that might be. I've tried a couple of different difficulty settings, but they don't seem to make a difference in this regard.
|
|
|
|
|
|
Zels
|
|
June 07, 2014, 05:05:23 PM |
|
Hi guys,
I have 4 750ti's running X11 and in another pool they all average at about 1750 khash/s (as reported by ccminer). However, in Wafflepool I get only about 1550 per gpu, with everything else in the environment exactly the same. I was wondering why that might be. I've tried a couple of different difficulty settings, but they don't seem to make a difference in this regard.
You can get 2 - 2.1Mh easy with your 750ti. My ccminer: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 ccminer50.exe --algo=x11 -o stratum+tcp://eu.wafflepool.com:3331 -u xxxx -p d=0.008 Overclock setting:  |
|
|
|
|
KayCeeee
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 07, 2014, 06:44:22 PM |
|
I am very green to mining. I currently use BMAT for scrypt mining with 2 AMD R7970HD cards. I would like to switch over to the X11 when it becomes available but as I understand it BMAT won't do X11 mining. Since I need an operating system that will run off a USB stick could someone please give me some help or suggestions on how to go about this? Thanks in advance!
|
|
|
|
|
CrashOD
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 07, 2014, 07:27:41 PM |
|
I am very green to mining. I currently use BMAT for scrypt mining with 2 AMD R7970HD cards. I would like to switch over to the X11 when it becomes available but as I understand it BMAT won't do X11 mining. Since I need an operating system that will run off a USB stick could someone please give me some help or suggestions on how to go about this? Thanks in advance!
I personally haven't tried it, but I think this is what you might want to look into: https://bitcointalk.org/index.php?topic=558715.0 |
|
|
|
|
Trevor3000
Newbie
Offline
Activity: 10
Merit: 0
|
|
June 07, 2014, 08:04:06 PM |
|
You can get 2 - 2.1Mh easy with your 750ti. My ccminer: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 ccminer50.exe --algo=x11 -o stratum+tcp://eu.wafflepool.com:3331 -u xxxx -p d=0.008 Overclock setting: https://i.imgur.com/6ngHYsJ.pngI guess I could, but currently I'm limited with my overclocking potential, since all of the four cards are so tightly packed together. So even with this happy little gpu, the temps tend to go really high really fast. I'll probably try with a different setup with risers later, but for now this has to do. But I'm still curious why the difference in MHash between pools. |
|
|
|
|
|
utahjohn
|
|
June 07, 2014, 08:33:58 PM |
|
Temps are MUCH lower with X11 give it a try |
|
|
|
|
|
chadwickx16
|
|
June 07, 2014, 08:40:20 PM |
|
I am very green to mining. I currently use BMAT for scrypt mining with 2 AMD R7970HD cards. I would like to switch over to the X11 when it becomes available but as I understand it BMAT won't do X11 mining. Since I need an operating system that will run off a USB stick could someone please give me some help or suggestions on how to go about this? Thanks in advance!
PM'd you! Check this LINK, and let me know if you have any questions. |
|
|
|
|
RickJamesBTC
|
|
June 07, 2014, 09:51:44 PM |
|
Make it work! I just put ~80 mh onto x11 for you, working on getting x11 mod on all of them so it should be 130MH soon. Get darkcoin working |
|
|
|
|
Trevor3000
Newbie
Offline
Activity: 10
Merit: 0
|
|
June 07, 2014, 11:23:02 PM |
|
@Zels
Have you tried your 750ti's across different pools? Are there any differences in the hashrate for X11?
|
|
|
|
|
|
poolwaffle (OP)
|
|
June 08, 2014, 12:23:39 AM |
|
Make it work! I just put ~80 mh onto x11 for you, working on getting x11 mod on all of them so it should be 130MH soon. Get darkcoin working Darkcoin is working, just disabled due to the amount of variance it would add (at 1.1ghs we'd on average be solving blocks every 4.3hrs) is a bit too much. Will probably be enabled as we hit around 2ghs |
|
|
|
|
|
