[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[miningpoolhub]

Is there anyway to set your own fixed strantum diff level on Lyra2z. I am getting a solid 18.5 Mhz on my miner yet on your site it is constantly varying between 12 (most of time around 12) Mhz and spikes to 18 Mhz and that is due to the diff level constantly being adjusted to high.

Many Thanks, because this is the only pool that does this Algo, id prefer to fix it here than move elsewhere.

And thank you for answering my maxcoin issue. I turned auto exchange off as its faster I transfer coins manually to an exchange and perform the action. Its still a handy feature to have there just in case however.

I second notion for Zen, in fact it would be nice to have all equihash coins added at some point.


2017-10-20 19:46:34] accepted: 125/125 (diff 0.063), 18.55 MH/s yes!
[2017-10-20 19:46:36] GPU #1: GeForce GTX 1080 Ti, 3181.37 kH/s
[2017-10-20 19:46:36] GPU #3: GeForce GTX 1080 Ti, 3211.42 kH/s
[2017-10-20 19:46:36] GPU #4: Gigabyte GTX 1080, 2332.96 kH/s
[2017-10-20 19:46:37] GPU #5: GeForce GTX 1080 Ti, 3210.13 kH/s
[2017-10-20 19:46:37] GPU #2: GeForce GTX 1080 Ti, 3213.28 kH/s
[2017-10-20 19:46:38] GPU #0: GeForce GTX 1080 Ti, 3296.99 kH/s
[2017-10-20 19:46:38] accepted: 126/126 (diff 0.077), 18.54 MH/s yes!
[2017-10-20 19:46:52] GPU #5: GeForce GTX 1080 Ti, 3269.53 kH/s
[2017-10-20 19:46:52] accepted: 127/127 (diff 1.634), 18.54 MH/s yes!
[2017-10-20 19:46:54] GPU #2: GeForce GTX 1080 Ti, 3263.17 kH/s
[2017-10-20 19:46:54] accepted: 128/128 (diff 0.121), 18.54 MH/s yes!
[2017-10-20 19:47:08] GPU #1: GeForce GTX 1080 Ti, 3251.92 kH/s
[2017-10-20 19:47:08] accepted: 129/129 (diff 1.247), 18.54 MH/s yes!
[2017-10-20 19:47:34] GPU #1: GeForce GTX 1080 Ti, 3256.41 kH/s
[2017-10-20 19:47:35] accepted: 130/130 (diff 0.129), 18.54 MH/s yes!
[2017-10-20 19:47:40] GPU #0: GeForce GTX 1080 Ti, 3285.59 kH/s
[2017-10-20 19:47:40] accepted: 131/131 (diff 0.073), 18.55 MH/s yes!
[2017-10-20 19:47:41] GPU #3: GeForce GTX 1080 Ti, 3272.75 kH/s
[2017-10-20 19:47:41] GPU #4: Gigabyte GTX 1080, 2373.42 kH/s
[2017-10-20 19:47:45] GPU #0: GeForce GTX 1080 Ti, 3291.74 kH/s
[2017-10-20 19:47:46] accepted: 132/132 (diff 0.146), 18.55 MH/s yes!
[2017-10-20 19:47:51] Stratum difficulty set to 22.0497 (0.08613)
[2017-10-20 19:47:52] GPU #5: GeForce GTX 1080 Ti, 3273.28 kH/s
[2017-10-20 19:47:54] GPU #2: GeForce GTX 1080 Ti, 3279.23 kH/s
[2017-10-20 19:48:06] GPU #3: GeForce GTX 1080 Ti, 3268.81 kH/s
[2017-10-20 19:48:06] accepted: 133/133 (diff 0.426), 18.55 MH/s yes!
[2017-10-20 19:48:14] GPU #2: GeForce GTX 1080 Ti, 3189.95 kH/s
[2017-10-20 19:48:14] accepted: 134/134 (diff 0.098), 18.55 MH/s yes!
[2017-10-20 19:48:36] GPU #1: GeForce GTX 1080 Ti, 3178.34 kH/s
[2017-10-20 19:48:42] GPU #4: Gigabyte GTX 1080, 2344.84 kH/s
[2017-10-20 19:48:46] GPU #5: GeForce GTX 1080 Ti, 3234.25 kH/s
[2017-10-20 19:48:46] accepted: 135/135 (diff 0.102), 18.54 MH/s yes!
[2017-10-20 19:48:52] GPU #0: GeForce GTX 1080 Ti, 3238.06 kH/s
[2017-10-20 19:49:07] GPU #3: GeForce GTX 1080 Ti, 3222.95 kH/s
[2017-10-20 19:49:13] GPU #2: GeForce GTX 1080 Ti, 3270.97 kH/s
[2017-10-20 19:49:33] GPU #1: GeForce GTX 1080 Ti, 3230.56 kH/s
[2017-10-20 19:49:33] accepted: 136/136 (diff 0.239), 18.54 MH/s yes!
[2017-10-20 19:49:41] GPU #4: Gigabyte GTX 1080, 2367.39 kH/s
[2017-10-20 19:49:46] GPU #5: GeForce GTX 1080 Ti, 3270.41 kH/s
[2017-10-20 19:49:58] GPU #0: GeForce GTX 1080 Ti, 3273.59 kH/s
[2017-10-20 19:50:06] GPU #3: GeForce GTX 1080 Ti, 3272.66 kH/s
[2017-10-20 19:50:14] GPU #2: GeForce GTX 1080 Ti, 3228.81 kH/s
[2017-10-20 19:50:26] GPU #4: Gigabyte GTX 1080, 2333.87 kH/s
[2017-10-20 19:50:26] accepted: 137/137 (diff 1.057), 18.54 MH/s yes!
[2017-10-20 19:50:35] GPU #1: GeForce GTX 1080 Ti, 3164.36 kH/s
[2017-10-20 19:50:47] GPU #5: GeForce GTX 1080 Ti, 3200.25 kH/s
[2017-10-20 19:50:47] GPU #3: GeForce GTX 1080 Ti, 3185.98 kH/s
[2017-10-20 19:50:47] accepted: 138/138 (diff 0.377), 18.54 MH/s yes!
[2017-10-20 19:51:03] GPU #2: GeForce GTX 1080 Ti, 3253.40 kH/s
[2017-10-20 19:51:03] accepted: 139/139 (diff 0.953), 18.54 MH/s yes!
[2017-10-20 19:51:05] GPU #0: GeForce GTX 1080 Ti, 3202.91 kH/s


your site always hovers on 12Mhz

Hashrate
12.68

There's no way to set static diff for zcoin.
(I only enable this feature for some fast block changing coins)

What miner are you using? Have you tried latest djm34 build linked on zcoin miningpoolhub main page?
Someone told me that it solved issue.

sometimes i see this

 SC: Stratum - Connected (europe.hub.miningpoolhub.com:20550)
 SC: Received unknown response: {"id":null,"method":"mining.notify","params":["6
0d","0x6b6564206265666f72652069742063616e2062652075736564227d0a","0x000000001253
3fe68fd3d1cfe47445abdce0b117994feb3fbbe16e3d0f675ad9",true]}

I don't understand why this is unknown response.
You are using claymore right? I'll contact claymore about it.

Can you send me log file of this. I need to read around that message.

Hi please the administrator of the pool can post the link to unlock an account because the message said that some instructions will be send to my email but until now I didnt receive nothing? Please admin can you help me with this?

You can contact me privately via contact@miningpoolhub.com
I usually unlocked account when I receive unlocked request email.

Hello, i have unconfirmed transactions for ZCoin starting from 2017-10-22 10:31:55 (UTC). It`s been several hours and still not confirmed. Sshot attached. Dont know is it normal to be this long?

Zcoin needs about 1 day to confirm. It's coin's spec.

Hello all, I have a problem with wallet management, I already added PAYMENT ADDRESS and PAYOUT TO section is still Gray with no info. When I'm trying to Cash out im receiving a message: You have no payout address set.
What am I doing wrong?

Thanks

Are you sure you added wallet address?
It should be shown both left and right address field.

You should not duplicate, valid address and valid PIN/OTP.

Let me know your id, coin, and address info if you are still stuck.

Will you add BTG soon after the fork?

I took snapshot of BTG but BTG wallet is not ready yet.
Still no mainnet working.

Greetings!

Myriadcoin has released a new upgrade:

https://www.reddit.com/r/myriadcoin/comments/77mtcj/myriadcoin_01420/

Please update your mining nodes.

Thanks!

Thanks. I'll check.

Mr MPH,

Have you found an alternative solution yet to provide a live API instead of the cloudflare cached one? Please do. Thanks.

There's no alternative solution I found yet. Adding some other socket connection would be better I think.

I tried today mining on hub.miningpoolhub.com with Sgminer 5.5
But all I get is
most likely you put wrong URL, forgot to add port, or have not setup a worker.

And I have this in config file and ports are opened.

{
"pools" : [
{
"poolname" : "neoscrypt",
"url" : "stratum+tcp://hub.miningpoolhub.com:12012",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "neoscrypt"
},
{
"poolname" : "x15",
"url" : "stratum+tcp://hub.miningpoolhub.com:12009",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "bitblock"
},
{
"poolname" : "x13",
"url" : "stratum+tcp://hub.miningpoolhub.com:12008",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "marucoin-mod"
},
{
"poolname" : "x11",
"url" : "stratum+tcp://hub.miningpoolhub.com:12007",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "darkcoin-mod"
},
{
"poolname" : "myriadcoin-groestl",
"url" : "stratum+tcp://hub.miningpoolhub.com:12005",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "myriadcoin-groestl"
},
{
"poolname" : "keccak",
"url" : "stratum+tcp://hub.miningpoolhub.com:12003",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "maxcoin"
},
{
"poolname" : "scrypt",
"url" : "stratum+tcp://hub.miningpoolhub.com:12001",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "zuikkis",
"nfactor" : "10"
},
{
"poolname" : "scryptn",
"url" : "stratum+tcp://hub.miningpoolhub.com:12002",
"user" : "username.workername",
"pass" : "x",
"algorithm" : "zuikkis",
"nfactor" : "11"
}
],
"failover-only" : true,
"failover-switch-delay" : "30",
"queue" : "0"
}

You should set appropriate hub worker job on Hub Worker page.
Also don't forget to change username.workername to your own username and workername.

problem on zcoin pool ? getting half haterate

Maybe try djm34's latest ccminer release. It would help.

Hi everybody. Is this pool also for people with an Antminer L3+? And is there a server in the EU? IProhashing is dead and nicehash is giving to low return on Scrypt so i am really  looking for a good multi switch European mining pool close to Holland.

You would be a great help pointing me to 1 (or 2 to choose) I tried mining-duth but they mine unsellabe coins so there is no profit. Prohashing gives to much stale shares. So i am really looking for alternatives.

Thanks

There's no europe server for scrypt algo currently.
You can mine scrypt algo based coins by pointing hub.miningpoolhub.com:17001

Also I recommend you to add auto exchange feature for it. It will auto exchange several scrypt coins to one coin easily.

need ZEN pool  faster

I'm working on ZEN pool.
It's not that easy than I thought because of zclassic fork and several duplications.

Does anyone have any tips to help me improve my returns ? Can anyone check my math?

Here are my stats:
https://imgur.com/a/Olkf7

I've been mining Monacoin continuously for 18h using 4x 1080Ti @ 75%TDP, no overclock (257 MHs)

This should net me around 3 MONA coins for 24h according to mining calculator https://whattomine.com/coins/148-mona-lyra2rev2?utf8=%E2%9C%93&hr=257000.0&p=0.0&fee=2&cost=0.1&hcost=0.0&commit=Calculate

So far, I've received 1.5 MONA over 18h, so this comes up to 2 MONA /24h, about 50% less than estimated.

I understand that the calculator may be flawed, and that there is luck involved, but the pool stats seem to say the luck has been good during last 24h.

What really worries me, is the hashrate over the last 18h, as seen by the blue graph, never got close to the 257MHs reported by my miner (peaks at 181 MHs).

I don't have any reject shares and ccminer seams to have accepted 4964/4965 shares over the last 18h.

What can I do to improve my returns ?

Is -50% return compared to estimates normal ?
How can I improve my pool hashrate?

I recently found that some ccminer's numbers are not that accurate or reliable for some specific algo.
Lyra2z, Lyra2RE2 seems have some memory related bottleneck and their works are not submitted in time.

Maybe trying djm34's latest ccminer. It submits stale shares anyway and it would help for some miners.

Hello,

This is my first foray into mining and I am just testing the waters with my standard desktop.  I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working.  I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner.  I know this isn't optimal for mining.  Again, I am just trying to figure it out right now.  Thank you for any help.

Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100

The above errors show up as soon as the miner starts running.  Additionally once the miner starts running I receive the message below with what I think is an error:

Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)

Have you inserted correct username.workername?
What commandline did you use?

Hi!

A required update for Myriadcoin has been released:

https://www.reddit.com/r/myriadcoin/comments/78wjp4/myriadcoin_01421/

We found a critical consensus issue.

Kind Regards,

Yeah thanks.

Hello,

This is my first foray into mining and I am just testing the waters with my standard desktop.  I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working.  I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner.  I know this isn't optimal for mining.  Again, I am just trying to figure it out right now.  Thank you for any help.

Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100

The above errors show up as soon as the miner starts running.  Additionally once the miner starts running I receive the message below with what I think is an error:

Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)

Remove those lines from config.txt and add them to start.bat

Code:

set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_HEAP_SIZE 100
set GPU_FORCE_64BIT_PTR 1
set GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe

Config.txt should look something like

Code:

-zpool europe.equihash-hub.miningpoolhub.com:20570
-zwal USER.RIG1
-zpsw z
#-tt 75
#-i 6

change user to your own user name

I moved the lines from config.txt to Start.bat.  Now when it starts up it displays the following:

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_FORCE_64BIT_PTR 1
Environment variable GPU_FORCE_64BIT_PTR 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_HEAP_SIZE 100
Environment variable GPU_MAX_HEAP_SIZE 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_USE_SYNC_OBJECTS 1
Environment variable GPU_USE_SYNC_OBJECTS 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_ALLOC_PERCENT 100
Environment variable GPU_MAX_ALLOC_PERCENT 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_SINGLE_ALLOC_PERCENT 100
Environment variable GPU_SINGLE_ALLOC_PERCENT 100 not defined

Also, I am still receiving the same error after putting my poolhubmining user name in place of user and my worker name in place of Rig1.  I included the password even though the site says it doesn't check it.

I am at a loss as to what I am doing wrong.

What is your username? You should input your actual username.workername at USER.RIG1

e.g.) If your username is hello, input like hello.rig1

[miningpoolhub]

Ethereum Mining Pool Hub

https://ethereum.miningpoolhub.com

There was an DB issue causing pool info not updated for about 3 hours.
User would have seen wrong 0 hashrate and no credit changes in that period.

I believe no one lost their money due to this issue. It only affected delay of frontend info updates.

Sorry for inconvenience. I contacted Amazon RDS DB staff about this issue and it will not happen again.

[carlo_0000]

something wrong with monero earning and multipool

Miner                   BTC                                          EUR
-----                   ---                                          ---
MultiPoolMiner          1,08207 ±2.519 % (0,04131-28,34395)          5.442,2...
ClaymoreAmd-Cryptonight 137,90458 ±328.381 % (0,04198-452.990,09942) 693.586...

not just on 1 computer it s on all of them

[kenydream]

Hi, did miningpoolhub just decreased their ETH payout TX fee from 0.001 > 0.0005?

[eagleye]

Hey there,

New coin pool ideas...

As said Zencash would be great and so would BTG when it becomes available  I suppose you are probably already working on those.

Now, I know you are real busy, but how about some more X11.  Two real popular ones are
Cannabiscoin CANN

and
ONIX Coin    ONX

they both trade on Yobit and CANN on Bittrex too.

[Tao1123]

Hello,

This is my first foray into mining and I am just testing the waters with my standard desktop.  I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working.  I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner.  I know this isn't optimal for mining.  Again, I am just trying to figure it out right now.  Thank you for any help.

Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100

The above errors show up as soon as the miner starts running.  Additionally once the miner starts running I receive the message below with what I think is an error:

Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)

Remove those lines from config.txt and add them to start.bat

Code:

set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_HEAP_SIZE 100
set GPU_FORCE_64BIT_PTR 1
set GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe

Config.txt should look something like

Code:

-zpool europe.equihash-hub.miningpoolhub.com:20570
-zwal USER.RIG1
-zpsw z
#-tt 75
#-i 6

change user to your own user name

I moved the lines from config.txt to Start.bat.  Now when it starts up it displays the following:

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_FORCE_64BIT_PTR 1
Environment variable GPU_FORCE_64BIT_PTR 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_HEAP_SIZE 100
Environment variable GPU_MAX_HEAP_SIZE 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_USE_SYNC_OBJECTS 1
Environment variable GPU_USE_SYNC_OBJECTS 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_ALLOC_PERCENT 100
Environment variable GPU_MAX_ALLOC_PERCENT 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_SINGLE_ALLOC_PERCENT 100
Environment variable GPU_SINGLE_ALLOC_PERCENT 100 not defined

Also, I am still receiving the same error after putting my poolhubmining user name in place of user and my worker name in place of Rig1.  I included the password even though the site says it doesn't check it.

I am at a loss as to what I am doing wrong.

What is your username? You should input your actual username.workername at USER.RIG1

e.g.) If your username is hello, input like hello.rig1


[/quote]

I figured out the issue with my username.  Now it only shows up at the start then starts mining properly.  However the set errors are still occuring and I am unsure why.  Additionally, I am ordering everything for my first mining rig and have ordered 3 Vega 56 GPUs.  The only part I haven't ordered so far is the frame and I was curious if anyone has any insight as to what frame I should buy.
 this is the frame I am currently looking at but one of the reviews said it doesn't work wiht RX 580 and the Vegas are longer than the 580s.  The reviewer did not however specify why it doesn't work with the 580s.
https://www.newegg.com/Product/Product.aspx?Item=9SIAEXA6CV5495&cm_re=mining_frame-_-9SIAEXA6CV5495-_-Product

[fonyo]

something wrong with monero earning and multipool

Miner                   BTC                                          EUR
-----                   ---                                          ---
MultiPoolMiner          1,08207 ±2.519 % (0,04131-28,34395)          5.442,2...
ClaymoreAmd-Cryptonight 137,90458 ±328.381 % (0,04198-452.990,09942) 693.586...

not just on 1 computer it s on all of them

Yeah, noticed that, too. You need to run the resetprofit.bat file or just stay a millionaire.

[DrX]

I figured out the issue with my username.  Now it only shows up at the start then starts mining properly.  However the set errors are still occuring and I am unsure why.  Additionally, I am ordering everything for my first mining rig and have ordered 3 Vega 56 GPUs.  The only part I haven't ordered so far is the frame and I was curious if anyone has any insight as to what frame I should buy.
 this is the frame I am currently looking at but one of the reviews said it doesn't work wiht RX 580 and the Vegas are longer than the 580s.  The reviewer did not however specify why it doesn't work with the 580s.
https://www.newegg.com/Product/Product.aspx?Item=9SIAEXA6CV5495&cm_re=mining_frame-_-9SIAEXA6CV5495-_-Product

You can change the SET to SETX and test if that works.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

[Tao1123]

I figured out the issue with my username.  Now it only shows up at the start then starts mining properly.  However the set errors are still occuring and I am unsure why.  Additionally, I am ordering everything for my first mining rig and have ordered 3 Vega 56 GPUs.  The only part I haven't ordered so far is the frame and I was curious if anyone has any insight as to what frame I should buy.
 this is the frame I am currently looking at but one of the reviews said it doesn't work wiht RX 580 and the Vegas are longer than the 580s.  The reviewer did not however specify why it doesn't work with the 580s.
https://www.newegg.com/Product/Product.aspx?Item=9SIAEXA6CV5495&cm_re=mining_frame-_-9SIAEXA6CV5495-_-Product

You can change the SET to SETX and test if that works.

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

I tried that and it gave me the below errors:

UNKNOWN OPTION setx
UNKNOWN OPTION GPU_FORCE_64BIT_PTR 1
UNKNOWN OPTION setx
UNKNOWN OPTION GPU_MAX_HEAP_SIZE 100
UNKNOWN OPTION setx
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS 1
UNKNOWN OPTION setx
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT 100
UNKNOWN OPTION setx
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT 100

[cmbconcretefire]

Hello. First let me say I love miningpoolhub. No sarcasm. I really love it. But I need some help.

I have 6x 1060's (6GB) and 6x1070's (8gb). They are on dedicated rigs.

I can set up individual coins to mine just fine. (although in a lot of cases, the instructions could be clearer for each coin)

However, for the life of me, I CANNOT understand the directions for auto switching to the most profitable coin / algo.
From the FAQ page, it sounds as though I need ccminer 2.2.2 from trvput (or whatever his name is) and I have that miner. I even use that miner on other pools. So I am familiar with the miner itself.

But if you look at the example of the ccminer .bat on the FAQ page, look closely at the list of algo's. It doesn't even include equihash and I know for a fact it mines equihash.

I tried "Multipool" miner that is also listed on the FAQ page and I couldn't even begin to understand how to set it up.

So, here I am. I am BEGGING someone to please help me. I'd like (whatever miner) to auto switch to the most profitable coin/algo and I would also like to have it "auto convert" whatever I mine into Litecoin.

I assume I have to set up a "hub worker?"
I also assume I have to select Litecoin in the "auto exchange" menu.

But beyond that, I am absolutely lost. PLEASE HELP ME. Copy and paste all your bat files if possible so I can see for myself.

[aaronsace]

Hello. First let me say I love miningpoolhub. No sarcasm. I really love it. But I need some help.

I have 6x 1060's (6GB) and 6x1070's (8gb). They are on dedicated rigs.

I can set up individual coins to mine just fine. (although in a lot of cases, the instructions could be clearer for each coin)

However, for the life of me, I CANNOT understand the directions for auto switching to the most profitable coin / algo.
From the FAQ page, it sounds as though I need ccminer 2.2.2 from trvput (or whatever his name is) and I have that miner. I even use that miner on other pools. So I am familiar with the miner itself.

But if you look at the example of the ccminer .bat on the FAQ page, look closely at the list of algo's. It doesn't even include equihash and I know for a fact it mines equihash.

I tried "Multipool" miner that is also listed on the FAQ page and I couldn't even begin to understand how to set it up.

So, here I am. I am BEGGING someone to please help me. I'd like (whatever miner) to auto switch to the most profitable coin/algo and I would also like to have it "auto convert" whatever I mine into Litecoin.

I assume I have to set up a "hub worker?"
I also assume I have to select Litecoin in the "auto exchange" menu.

But beyond that, I am absolutely lost. PLEASE HELP ME. Copy and paste all your bat files if possible so I can see for myself.

Just open start.bat on MultiPoolMiner and you're done.

[fonyo]

Hello. First let me say I love miningpoolhub. No sarcasm. I really love it. But I need some help.

I have 6x 1060's (6GB) and 6x1070's (8gb). They are on dedicated rigs.

I can set up individual coins to mine just fine. (although in a lot of cases, the instructions could be clearer for each coin)

However, for the life of me, I CANNOT understand the directions for auto switching to the most profitable coin / algo.
From the FAQ page, it sounds as though I need ccminer 2.2.2 from trvput (or whatever his name is) and I have that miner. I even use that miner on other pools. So I am familiar with the miner itself.

But if you look at the example of the ccminer .bat on the FAQ page, look closely at the list of algo's. It doesn't even include equihash and I know for a fact it mines equihash.

I tried "Multipool" miner that is also listed on the FAQ page and I couldn't even begin to understand how to set it up.

So, here I am. I am BEGGING someone to please help me. I'd like (whatever miner) to auto switch to the most profitable coin/algo and I would also like to have it "auto convert" whatever I mine into Litecoin.

I assume I have to set up a "hub worker?"
I also assume I have to select Litecoin in the "auto exchange" menu.

But beyond that, I am absolutely lost. PLEASE HELP ME. Copy and paste all your bat files if possible so I can see for myself.

Just open start.bat on MultiPoolMiner and you're done.

If you are using MultiPoolMiner, try this with your 1070 rig (replace the entire code in start.bat and of course, add your own details!)

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

powershell -version 5.0 -noexit -executionpolicy bypass -command "&.\multipoolminer.ps1 -wallet 1LYnXNBS3GzF9hVd6LaMS7XPMREUxj8tN3 -username fonyo -workername mercury -ssl -region europe -currency btc,usd,gbp -type nvidia -poolname miningpoolhub,miningpoolhubcoins -algorithm cryptonight,ethash,ethash2gb,equihash,groestl,lyra2z,siaclaymore,myr-gr,neoscrypt,lyra2re2,lyra2,lyra2rev2,lyra2v2 -donate 10"

I suspect it will also work well with your 1060 rig but I am not a 100% sure on that one, maybe someone else can confirm this.

There is also a quite extensive README you will definitely find helpful and I highly recommend reading it so you understand the config and its structure above! https://github.com/aaronsace/MultiPoolMiner/blob/master/README.txt

No, you don't have to set up a hub worker.
Yes, you need to set the auto-exchange feature to litecoin on MiningPoolHub.

...and please just quit begging.

[fonyo]

Hello,

This is my first foray into mining and I am just testing the waters with my standard desktop.  I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working.  I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner.  I know this isn't optimal for mining.  Again, I am just trying to figure it out right now.  Thank you for any help.

Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100

The above errors show up as soon as the miner starts running.  Additionally once the miner starts running I receive the message below with what I think is an error:

Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)

Remove those lines from config.txt and add them to start.bat

Code:

set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_HEAP_SIZE 100
set GPU_FORCE_64BIT_PTR 1
set GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe

Config.txt should look something like

Code:

-zpool europe.equihash-hub.miningpoolhub.com:20570
-zwal USER.RIG1
-zpsw z
#-tt 75
#-i 6

change user to your own user name

I moved the lines from config.txt to Start.bat.  Now when it starts up it displays the following:

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_FORCE_64BIT_PTR 1
Environment variable GPU_FORCE_64BIT_PTR 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_HEAP_SIZE 100
Environment variable GPU_MAX_HEAP_SIZE 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_USE_SYNC_OBJECTS 1
Environment variable GPU_USE_SYNC_OBJECTS 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_ALLOC_PERCENT 100
Environment variable GPU_MAX_ALLOC_PERCENT 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_SINGLE_ALLOC_PERCENT 100
Environment variable GPU_SINGLE_ALLOC_PERCENT 100 not defined

Also, I am still receiving the same error after putting my poolhubmining user name in place of user and my worker name in place of Rig1.  I included the password even though the site says it doesn't check it.

I am at a loss as to what I am doing wrong.

What is your username? You should input your actual username.workername at USER.RIG1

e.g.) If your username is hello, input like hello.rig1

I figured out the issue with my username.  Now it only shows up at the start then starts mining properly.  However the set errors are still occuring and I am unsure why.  Additionally, I am ordering everything for my first mining rig and have ordered 3 Vega 56 GPUs.  The only part I haven't ordered so far is the frame and I was curious if anyone has any insight as to what frame I should buy.
 this is the frame I am currently looking at but one of the reviews said it doesn't work wiht RX 580 and the Vegas are longer than the 580s.  The reviewer did not however specify why it doesn't work with the 580s.
https://www.newegg.com/Product/Product.aspx?Item=9SIAEXA6CV5495&cm_re=mining_frame-_-9SIAEXA6CV5495-_-Product

I use dish drying racks (multi-level) that cost less then 10 quid from Amazon. Dirt cheap, works well with zip ties.

[fonyo]

Hey Mr MPH,

What is the status of launching Zencash pool and the others? What is the hold-off? Have you managed to find help and what happened to that person who offered to help with the new pools?

[cmbconcretefire]

Hello. First let me say I love miningpoolhub. No sarcasm. I really love it. But I need some help.

I have 6x 1060's (6GB) and 6x1070's (8gb). They are on dedicated rigs.

I can set up individual coins to mine just fine. (although in a lot of cases, the instructions could be clearer for each coin)

However, for the life of me, I CANNOT understand the directions for auto switching to the most profitable coin / algo.
From the FAQ page, it sounds as though I need ccminer 2.2.2 from trvput (or whatever his name is) and I have that miner. I even use that miner on other pools. So I am familiar with the miner itself.

But if you look at the example of the ccminer .bat on the FAQ page, look closely at the list of algo's. It doesn't even include equihash and I know for a fact it mines equihash.

I tried "Multipool" miner that is also listed on the FAQ page and I couldn't even begin to understand how to set it up.

So, here I am. I am BEGGING someone to please help me. I'd like (whatever miner) to auto switch to the most profitable coin/algo and I would also like to have it "auto convert" whatever I mine into Litecoin.

I assume I have to set up a "hub worker?"
I also assume I have to select Litecoin in the "auto exchange" menu.

But beyond that, I am absolutely lost. PLEASE HELP ME. Copy and paste all your bat files if possible so I can see for myself.

Just open start.bat on MultiPoolMiner and you're done.

If you are using MultiPoolMiner, try this with your 1070 rig (replace the entire code in start.bat and of course, add your own details!)

Code:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

powershell -version 5.0 -noexit -executionpolicy bypass -command "&.\multipoolminer.ps1 -wallet 1LYnXNBS3GzF9hVd6LaMS7XPMREUxj8tN3 -username fonyo -workername mercury -ssl -region europe -currency btc,usd,gbp -type nvidia -poolname miningpoolhub,miningpoolhubcoins -algorithm cryptonight,ethash,ethash2gb,equihash,groestl,lyra2z,siaclaymore,myr-gr,neoscrypt,lyra2re2,lyra2,lyra2rev2,lyra2v2 -donate 10"

I suspect it will also work well with your 1060 rig but I am not a 100% sure on that one, maybe someone else can confirm this.

There is also a quite extensive README you will definitely find helpful and I highly recommend reading it so you understand the config and its structure above! https://github.com/aaronsace/MultiPoolMiner/blob/master/README.txt

No, you don't have to set up a hub worker.
Yes, you need to set the auto-exchange feature to litecoin on MiningPoolHub.

...and please just quit begging.

Bless you both. I will try and report back my findings. I have 4 more questions.
1) By setting the auto-exchange to Litecoin, that will automatically turn everything I mine into LTC, even if I'm not using the auto switch thing. Correct?
2) The reason I want to auto-exchange is because if I don't, I'll have to go through each wallet and do my transactions one by one. Correct?
3) The reason I want to use Litecoin vs Bitcoin as my coin of choice is to save $ on the FINAL transaction. Example: I mine for a few days using this auto switch profit thing, and it converts everything to LTC. Then I want to send that LTC to an exchange. From my experience, using LTC to send the transaction to my exchange of choice is a heck of a lot cheaper in US dollars than sending Bitcoin. Is my thinking correct on this?
4) Under the "COIN MINING STATUS AND PROFITS. SORTED FOR NVIDIA GPU" - I don't understand how this works. I am used to using whattomine website and I will typically change the parameters for average profit and average difficulty for the past 24 hrs and 3 days. From there it's pretty straight forward. I will mine the #1 coin on the list. I do not understand how the listing above works at all compared to whattomine. Can someone explain that? Thanks so much.

[sypher9]

Thanks for everyone's help regarding Zcoin. I have been able to mine it with my 4x 1080Ti at 11MHs+ pool-side for the last 12h. I think I finally found the right version of ccminer :-) t

[Call_Me_Bambi]

Hello,

This is my first foray into mining and I am just testing the waters with my standard desktop.  I am getting the below errors and was hoping someone could explain to me what is happening and why it's not working.  I am using an AMD R7 200 series with Claymores AMD Zcash AMD GPU miner.  I know this isn't optimal for mining.  Again, I am just trying to figure it out right now.  Thank you for any help.

Error parsing line 5 of config.txt
UNKNOWN OPTION GPU_FORCE_64BIT_PTR
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_HEAP_SIZE
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_USE_SYNC_OBJECTS
UNKNOWN OPTION 1
UNKNOWN OPTION GPU_MAX_ALLOC_PERCENT
UNKNOWN OPTION 100
UNKNOWN OPTION GPU_SINGLE_ALLOC_PERCENT
UNKNOWN OPTION 100

The above errors show up as soon as the miner starts running.  Additionally once the miner starts running I receive the message below with what I think is an error:

Pool sets new share target: 0x00010000 (diff: 65535H)
ZEC: Authorization failed
: ("id":2,"result":false,"error":null)

Remove those lines from config.txt and add them to start.bat

Code:

set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
set GPU_MAX_HEAP_SIZE 100
set GPU_FORCE_64BIT_PTR 1
set GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe

Config.txt should look something like

Code:

-zpool europe.equihash-hub.miningpoolhub.com:20570
-zwal USER.RIG1
-zpsw z
#-tt 75
#-i 6

change user to your own user name

I moved the lines from config.txt to Start.bat.  Now when it starts up it displays the following:

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_FORCE_64BIT_PTR 1
Environment variable GPU_FORCE_64BIT_PTR 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_HEAP_SIZE 100
Environment variable GPU_MAX_HEAP_SIZE 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_USE_SYNC_OBJECTS 1
Environment variable GPU_USE_SYNC_OBJECTS 1 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_MAX_ALLOC_PERCENT 100
Environment variable GPU_MAX_ALLOC_PERCENT 100 not defined

C:\Miner\Claymore’s Zcash AMD GPU Miner v12.6>set GPU_SINGLE_ALLOC_PERCENT 100
Environment variable GPU_SINGLE_ALLOC_PERCENT 100 not defined

Also, I am still receiving the same error after putting my poolhubmining user name in place of user and my worker name in place of Rig1.  I included the password even though the site says it doesn't check it.

I am at a loss as to what I am doing wrong.

I have found that sometime you have to change the "set" option to "setx", don't know why but sometimes "set" worked and sometimes "setx" (on different PCs).
So try this:

Code:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_FORCE_64BIT_PTR 1
setx GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe

You can also put everything in the .bat file, like this:
[claymore ignores commands in the confg.txt file if they are already in the .bat file].
[there's something about it working better if you put the 'ssl://' bit in, but can't remmember just now]

Code:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_FORCE_64BIT_PTR 1
setx GPU_SINGLE_ALLOC_PERCENT 100

ZecMiner64.exe -zpool ssl://europe.equihash-hub.miningpoolhub.com:20570 -zwal USERNAME.WORKERNAME -zpsw z

More help here:
https://bitcointalk.org/index.php?topic=1670733.0

[miningpoolhub]

something wrong with monero earning and multipool

Miner                   BTC                                          EUR
-----                   ---                                          ---
MultiPoolMiner          1,08207 ±2.519 % (0,04131-28,34395)          5.442,2...
ClaymoreAmd-Cryptonight 137,90458 ±328.381 % (0,04198-452.990,09942) 693.586...

not just on 1 computer it s on all of them

Sorry monero block's reward was calculated wrongly while I was updating monero to latest release.

Hi, did miningpoolhub just decreased their ETH payout TX fee from 0.001 > 0.0005?

Decreased fee after the hardfork because network became stable and capacity increased.

Hey there,

New coin pool ideas...

As said Zencash would be great and so would BTG when it becomes available  I suppose you are probably already working on those.

Now, I know you are real busy, but how about some more X11.  Two real popular ones are
Cannabiscoin CANN

and
ONIX Coin    ONX

they both trade on Yobit and CANN on Bittrex too.

Yeah I'll add them after zencash.
Working some stuffs with zencash still.

I figured out the issue with my username.  Now it only shows up at the start then starts mining properly.  However the set errors are still occuring and I am unsure why.  Additionally, I am ordering everything for my first mining rig and have ordered 3 Vega 56 GPUs.  The only part I haven't ordered so far is the frame and I was curious if anyone has any insight as to what frame I should buy.
 this is the frame I am currently looking at but one of the reviews said it doesn't work wiht RX 580 and the Vegas are longer than the 580s.  The reviewer did not however specify why it doesn't work with the 580s.
https://www.newegg.com/Product/Product.aspx?Item=9SIAEXA6CV5495&cm_re=mining_frame-_-9SIAEXA6CV5495-_-Product

Good to hear that mining is working.

What OS are you using?
"setx" or "set" should work for normal windows.

Hey Mr MPH,

What is the status of launching Zencash pool and the others? What is the hold-off? Have you managed to find help and what happened to that person who offered to help with the new pools?

I'm working on with zencash still. Sorry for late.
The problem is that I have to recover zclassic balance from zencash to distribute missing balances for zclassic miners who held money in pool. I think it should be done before opening zencash.

There were some people who offered to help me but they did not make some outputs.
I recently hired two developer but it made waste my time more than before. I believe it will get better someday.

Bless you both. I will try and report back my findings. I have 4 more questions.
1) By setting the auto-exchange to Litecoin, that will automatically turn everything I mine into LTC, even if I'm not using the auto switch thing. Correct?
2) The reason I want to auto-exchange is because if I don't, I'll have to go through each wallet and do my transactions one by one. Correct?
3) The reason I want to use Litecoin vs Bitcoin as my coin of choice is to save $ on the FINAL transaction. Example: I mine for a few days using this auto switch profit thing, and it converts everything to LTC. Then I want to send that LTC to an exchange. From my experience, using LTC to send the transaction to my exchange of choice is a heck of a lot cheaper in US dollars than sending Bitcoin. Is my thinking correct on this?
4) Under the "COIN MINING STATUS AND PROFITS. SORTED FOR NVIDIA GPU" - I don't understand how this works. I am used to using whattomine website and I will typically change the parameters for average profit and average difficulty for the past 24 hrs and 3 days. From there it's pretty straight forward. I will mine the #1 coin on the list. I do not understand how the listing above works at all compared to whattomine. Can someone explain that? Thanks so much.

1. Yes.
2. Yes
3. Yes. You are right. Litecoin transaction fee is cheaper so Litecoin is recommended than Bitcoin in this case.
4. Pool does not provide detailed adjustment for each GPU.
Pool just shows an average for AMD and NVIDIA gpu groups. Norm profitability in green text column shows similar to whattomine.com

I regularly update gpu hashrate factor like whattomine.com but there could be some differences too because pool includes some historical mining statistics to minimize the difference between theory and reality.

Thanks for everyone's help regarding Zcoin. I have been able to mine it with my 4x 1080Ti at 11MHs+ pool-side for the last 12h. I think I finally found the right version of ccminer :-) t

Great!
You are now using djm34's latest build right?

[Spiffy_1]

With bitcoin gold going to equihash, I'd hope that we add the other equihash coins to compliment zcash mining since lately zencash has een flip flopping between most profitable against ethereum for me.  I know this was in a to do list for the owner, but perhaps we can get this moved up a bit.

[fonyo]

Hey Mr MPH,

What is the status of launching Zencash pool and the others? What is the hold-off? Have you managed to find help and what happened to that person who offered to help with the new pools?

I'm working on with zencash still. Sorry for late.
The problem is that I have to recover zclassic balance from zencash to distribute missing balances for zclassic miners who held money in pool. I think it should be done before opening zencash.

There were some people who offered to help me but they did not make some outputs.
I recently hired two developer but it made waste my time more than before. I believe it will get better someday.

Sad to hear that. It is easy to command and understand the instructions/tasks you give yourself when you are your own boss and it may seem waste of time to do same with other people when you have to talk to them, explain things to them, guide them, heck even teach them but don't make that fool you, it is worth it on the long run as you cannot do everything by yourself. Be patient. Good luck!