[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[TunerDude007]

Hey guys I'm using auto exchange for the first time. I sent a bit of dash over to be switched to btc but on my balances page it doesn't even show it to be on the exchange...Just looks like it disappeared, is this normal?

[win33]

Hmm..
So you are using latest djm34 build but still stuck?
Did you check your invalid share rate on dashboard? Was it high?
Let me know your id so that I can investigate.

I sent my login to you in skype.

[papampi]

Thanks for adding zencash was waiting for it long time ...

Now Its time to add hush(zdash)

[ying_style]

Hi guys! Can anyone tell me if I am doing something wrong! In my local PC I have the following Hash Rate but in the Dashboard I am seeing something else. I am using also MultiPoolMiner and its currently using CcminerLyra2z-Lyra2z.

Lyra2z Local: 1750 - 1770 kh
Zcoin Dashboard: 1.26 - 1.44 MH/s

I saw the following post but I am not sure if they are talking about the error or the low hash rate.

Quote from: fynxgloire on November 21, 2017, 10:45:25 PM
Hi, I am currently mining ZCoin and on my PC it shows a hashrate of 9.65 MH/s, but on the MiningPoolHub Dashboard for ZCoin it is displaying ony 4.36.
Is this normal?
Not only that now I am getting an error that zm.exe has been blocked from accessing the graphics hardware. wtf


I believe you are nvidia user using ccminer.
Try djm34's latest ccminer build. It's listed on zcoin pool homepage.

[win33]

Hi guys! Can anyone tell me if I am doing something wrong! In my local PC I have the following Hash Rate but in the Dashboard I am seeing something else. I am using also MultiPoolMiner and its currently using CcminerLyra2z-Lyra2z.

Lyra2z Local: 1750 - 1770 kh
Zcoin Dashboard: 1.26 - 1.44 MH/s

I saw the following post but I am not sure if they are talking about the error or the low hash rate.

Quote from: fynxgloire on November 21, 2017, 10:45:25 PM
Hi, I am currently mining ZCoin and on my PC it shows a hashrate of 9.65 MH/s, but on the MiningPoolHub Dashboard for ZCoin it is displaying ony 4.36.
Is this normal?
Not only that now I am getting an error that zm.exe has been blocked from accessing the graphics hardware. wtf


I believe you are nvidia user using ccminer.
Try djm34's latest ccminer build. It's listed on zcoin pool homepage.

I confirm! problem is available

[aaronsace]

Hi guys! Can anyone tell me if I am doing something wrong! In my local PC I have the following Hash Rate but in the Dashboard I am seeing something else. I am using also MultiPoolMiner and its currently using CcminerLyra2z-Lyra2z.

Lyra2z Local: 1750 - 1770 kh
Zcoin Dashboard: 1.26 - 1.44 MH/s

I saw the following post but I am not sure if they are talking about the error or the low hash rate.

Quote from: fynxgloire on November 21, 2017, 10:45:25 PM
Hi, I am currently mining ZCoin and on my PC it shows a hashrate of 9.65 MH/s, but on the MiningPoolHub Dashboard for ZCoin it is displaying ony 4.36.
Is this normal?
Not only that now I am getting an error that zm.exe has been blocked from accessing the graphics hardware. wtf


I believe you are nvidia user using ccminer.
Try djm34's latest ccminer build. It's listed on zcoin pool homepage.

FYI, MultiPoolMiner is using this one (which is correct):
https://github.com/djm34/ccminer-msvc2015/releases/download/v0.2.1/ccminer_cuda9.exe

[spreewel]

Yesterday I made registration on zcoin pool but can't login, didn't receive verification email or something like that, is there anybody who can help me?

[ying_style]

Hi guys! Can anyone tell me if I am doing something wrong! In my local PC I have the following Hash Rate but in the Dashboard I am seeing something else. I am using also MultiPoolMiner and its currently using CcminerLyra2z-Lyra2z.

Lyra2z Local: 1750 - 1770 kh
Zcoin Dashboard: 1.26 - 1.44 MH/s

I saw the following post but I am not sure if they are talking about the error or the low hash rate.

Quote from: fynxgloire on November 21, 2017, 10:45:25 PM
Hi, I am currently mining ZCoin and on my PC it shows a hashrate of 9.65 MH/s, but on the MiningPoolHub Dashboard for ZCoin it is displaying ony 4.36.
Is this normal?
Not only that now I am getting an error that zm.exe has been blocked from accessing the graphics hardware. wtf


I believe you are nvidia user using ccminer.
Try djm34's latest ccminer build. It's listed on zcoin pool homepage.

FYI, MultiPoolMiner is using this one (which is correct):
https[Suspicious link removed]

Hi! Thanks for your response but do you have any Idea if this is a real problem or just a display problem and I am awarded the proper hash rate. In other algorithms my local hash rate is at least close to the one showed in the dashboard.

[fynxgloire]

Hi guys! Can anyone tell me if I am doing something wrong! In my local PC I have the following Hash Rate but in the Dashboard I am seeing something else. I am using also MultiPoolMiner and its currently using CcminerLyra2z-Lyra2z.

Lyra2z Local: 1750 - 1770 kh
Zcoin Dashboard: 1.26 - 1.44 MH/s

I saw the following post but I am not sure if they are talking about the error or the low hash rate.

Quote from: fynxgloire on November 21, 2017, 10:45:25 PM
Hi, I am currently mining ZCoin and on my PC it shows a hashrate of 9.65 MH/s, but on the MiningPoolHub Dashboard for ZCoin it is displaying ony 4.36.
Is this normal?
Not only that now I am getting an error that zm.exe has been blocked from accessing the graphics hardware. wtf


I believe you are nvidia user using ccminer.
Try djm34's latest ccminer build. It's listed on zcoin pool homepage.

FYI, MultiPoolMiner is using this one (which is correct):
https://github.com/djm34/ccminer-msvc2015/releases/download/v0.2.1/ccminer_cuda9.exe

Sorry to say but this MulIPool miner is absolute garbage, I spent 2 days trying to get this thing to run stable on my system.
After windows blocked the miner program from accessing my video card, I finally gave up.
I had to manually copy dll's from here and there, followed all the instructions, then all sorts of issues.
I never had any issues with NeoMiner autoswitching program.
Going back to that one.
Good riddance

[aaronsace]

Sorry to say but this MulIPool miner is absolute garbage, I spent 2 days trying to get this thing to run stable on my system.
After windows blocked the miner program from accessing my video card, I finally gave up.
I had to manually copy dll's from here and there, followed all the instructions, then all sorts of issues.
I never had any issues with NeoMiner autoswitching program.
Going back to that one.
Good riddance

LOL no such thing as downloading DLLs. V2.7.0.1 works perfectly, check the issues section on GitHub. Keep spreading the FUD. That miner is my code as well.

[fynxgloire]

Sorry to say but this MulIPool miner is absolute garbage, I spent 2 days trying to get this thing to run stable on my system.
After windows blocked the miner program from accessing my video card, I finally gave up.
I had to manually copy dll's from here and there, followed all the instructions, then all sorts of issues.
I never had any issues with NeoMiner autoswitching program.
Going back to that one.
Good riddance

LOL no such thing as downloading DLLs. V2.7.0.1 works perfectly, check the issues section on GitHub. Keep spreading the FUD. That miner is my code as well.

I installed this on a complete newly upgraded to Windows Anniversary Edition 10 64 bit.
Trust me, its not good.
This is from one fellow developer to another ( me to you )
You need to install your code on a complete new PC and go step by step, you will see the missing holes.
Running this program even resulted in the miners (Claymore, ewbf,etc. ) only recognizing 7 out of my 8 graphics cards, YET all 8 are visible in device manager.
Plus your searching my whole damn hard drive and copying whole directories into your Bin directory ( including files and scripts that are not even required for your program to run )  Kind of like a virus.
Hey man, I would use it if it were stable, but not in its present form, no way.

[aaronsace]

Sorry to say but this MulIPool miner is absolute garbage, I spent 2 days trying to get this thing to run stable on my system.
After windows blocked the miner program from accessing my video card, I finally gave up.
I had to manually copy dll's from here and there, followed all the instructions, then all sorts of issues.
I never had any issues with NeoMiner autoswitching program.
Going back to that one.
Good riddance

LOL no such thing as downloading DLLs. V2.7.0.1 works perfectly, check the issues section on GitHub. Keep spreading the FUD. That miner is my code as well.

I installed this on a complete newly upgraded to Windows Anniversary Edition 10 64 bit.
Trust me, its not good.
This is from one fellow developer to another ( me to you )
You need to install your code on a complete new PC and go step by step, you will see the missing holes.
Running this program even resulted in the miners (Claymore, ewbf,etc. ) only recognizing 7 out of my 8 graphics cards, YET all 8 are visible in device manager.
Plus your searching my whole damn hard drive and copying whole directories into your Bin directory ( including files and scripts that are not even required for your program to run )  Kind of like a virus.
Hey man, I would use it if it were stable, but not in its present form, no way.

There are hundreds using it; I assure you it's working. If you think there is an issue, then report it on GitHub. It doesn't detect any cards in V2.7.0.1 so the issues are clearly nothing to do with MultiPoolMiner but the miners. It's searching your hard drive because you didn't downloaded the release but a highly buggy branch of code.

Seriously though; don't spread FUD if you are a developer when you haven't even reported the issue.

[BellicoseBenny]

Hi guys! Can anyone tell me if I am doing something wrong! In my local PC I have the following Hash Rate but in the Dashboard I am seeing something else. I am using also MultiPoolMiner and its currently using CcminerLyra2z-Lyra2z.

Lyra2z Local: 1750 - 1770 kh
Zcoin Dashboard: 1.26 - 1.44 MH/s

I saw the following post but I am not sure if they are talking about the error or the low hash rate.

Quote from: fynxgloire on November 21, 2017, 10:45:25 PM
Hi, I am currently mining ZCoin and on my PC it shows a hashrate of 9.65 MH/s, but on the MiningPoolHub Dashboard for ZCoin it is displaying ony 4.36.
Is this normal?
Not only that now I am getting an error that zm.exe has been blocked from accessing the graphics hardware. wtf


I believe you are nvidia user using ccminer.
Try djm34's latest ccminer build. It's listed on zcoin pool homepage.

FYI, MultiPoolMiner is using this one (which is correct):
https://github.com/djm34/ccminer-msvc2015/releases/download/v0.2.1/ccminer_cuda9.exe

Sorry to say but this MulIPool miner is absolute garbage, I spent 2 days trying to get this thing to run stable on my system.
After windows blocked the miner program from accessing my video card, I finally gave up.
I had to manually copy dll's from here and there, followed all the instructions, then all sorts of issues.
I never had any issues with NeoMiner autoswitching program.
Going back to that one.
Good riddance

The thing about running algo switchers is you need to tune down your cards

Just because it runs stable on one algo OC'd to this or that amount doesn't mean it will be stable on all of them.

This seems to be especially a problem if a GPU is driving the display. Nvidia drivers really don't like the algo switching in those scenarios.

My mining rig handles the algo switching much better. .. . Presumably because I don't have any of hte cards driving displays.

I don't even bother with algo switching on the personal rig. Too much of a pain.

[MiCoSa]

I wonder if the auto switch for the baikal giant x10 works correctly? It seems that it switches often to digibyte-Skein not considering, that the hashrate for Skein algorithm is only 5 GH/s instead of 10 GH/s.

Could you please check this?

[Rybl]

And copy to problem mentioned above, my latest ccminers by djm34 shows 13,64Mh/S, however dashboard on MPH only 8Mh/s..

http://i97.fastpic.ru/big/2017/1123/4d/139fb4fa6f730d0d8394b8926f9b9f4d.jpeg

Again shows the wrong hash.
Why such a mistake?
Because of this, and less coins when mining is obtained.
Yesterday was normal, but the day before yesterday, too, such a mistake, a heshret on the pool more than a coin all day was.

[fynxgloire]

And copy to problem mentioned above, my latest ccminers by djm34 shows 13,64Mh/S, however dashboard on MPH only 8Mh/s..

I had the same problem,
You have to find a closer server to you.
I was showing only 6, but now its showing 14 because I changed servers from Asia to Europe ( to europe only 7 ms ping, Asia was 114ms, US was 200ms )
Try it out.

[koukir33]

stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581
I have exactly the same problem ccminer shows 17.67 mh/s but on the website 11.43. what you need to do to solve this?

[adore]

stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581
I have exactly the same problem ccminer shows 17.67 mh/s but on the website 11.43. what you need to do to solve this?

do you guys know how a pool works?
variance in your effective hashrate is caused by the pool calculating your rate based on the number of shares you submit in a given period
If you're lucky you'll submit an above average number of shares and the pool will show your effective rate as being higher than usual. so if you're unlucky and submit fewer shares in a period then your effective hashrate will drop below the hashrate that you're actually mining at
over short periods of time this can result in large variations
If you look at your average hashrate over a longer period (=you mine constantly during that time) then it should be close to your actual rate.

[aaronsace]

stratum+tcp://europe.lyra2z-hub.miningpoolhub.com:20581
I have exactly the same problem ccminer shows 17.67 mh/s but on the website 11.43. what you need to do to solve this?

do you guys know how a pool works?
variance in your effective hashrate is caused by the pool calculating your rate based on the number of shares you submit in a given period
If you're lucky you'll submit an above average number of shares and the pool will show your effective rate as being higher than usual. so if you're unlucky and submit fewer shares in a period then your effective hashrate will drop below the hashrate that you're actually mining at
over short periods of time this can result in large variations
If you look at your average hashrate over a longer period (=you mine constantly during that time) then it should be close to your actual rate.

True; best looking at the new graphs for a better picture.

[Rybl]

And copy to problem mentioned above, my latest ccminers by djm34 shows 13,64Mh/S, however dashboard on MPH only 8Mh/s..

I had the same problem,
You have to find a closer server to you.
I was showing only 6, but now its showing 14 because I changed servers from Asia to Europe ( to europe only 7 ms ping, Asia was 114ms, US was 200ms )
Try it out.

All the same, no one knows the mind at the pool hash is higher than the network.

Pool Hash Rate   106,682.481 MH/s
Current Difficulty   13247.528593108
Est. Avg. Time per Round (Network)   9 minutes 10 seconds
Est. Avg. Time per Round (Pool)   8 minutes 53 seconds
Est. Shares this Round   211960 (done: 76.63%)
Next Network Block   62265    (Current: 62264)
Last Block Found   62263
Time Since Last Block   7 minutes 25 seconds