GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[Zminer777]

what does it mean when i get a lot of connection timed out/write timed out? and the share accepted ms speed are very high like over 5000?

anyway bumped up 1080ti to 70%/+175core/+0 mem = 49.7sol/s
1070ti 70%/+250/+0 = 40.1sol/s

and the 1080ti watt reading is now 175 as oppsed to 150 before. is this a Gminer bug that it gives false Watt readings occasionally?

It's problem with your internet connection or with mining pool, check ping output to pool.

GMiner get power consumption from system(nvidia driver library), you also can check power consumption with nvidia-smi utility.

[Saverenergy]

what does it mean when i get a lot of connection timed out/write timed out? and the share accepted ms speed are very high like over 5000?

anyway bumped up 1080ti to 70%/+175core/+0 mem = 49.7sol/s
1070ti 70%/+250/+0 = 40.1sol/s

and the 1080ti watt reading is now 175 as oppsed to 150 before. is this a Gminer bug that it gives false Watt readings occasionally?

I am sure that the problems you listed are not caused by the Gminer. These problems are caused by your internet connection and your video cards overclocking setting.

[d0n4ald]

i think figured it out. seems i had to go to Nvidia control panel and change settings to "Maximum performance" instead of "Optimal Power". now the Watt reading is correct.

also my mining rig which is on wifi was too far away from router= i moved it closer and ping is around 80ms now consistently and no connection errors.

getting expected hashs now. seems consistent to whattomine estimates. i am getting ~95sol combined.

1070ti 75%/+250core/+500mem = ~42sol
1080ti 75%/+190core/+700mem = ~53sol

i am happy now

[Semtex72]

In newer versions, the miner is crashing with my palit RTX 2070's mining GRIN. Tried updating the drivers, but no luck. Older version works, and e.g. BEAMV2 is working for the latest version. I can also mine GRIN on other RTX2070 cards. Anyone have any idea why?

[Zminer777]

In newer versions, the miner is crashing with my palit RTX 2070's mining GRIN. Tried updating the drivers, but no luck. Older version works, and e.g. BEAMV2 is working for the latest version. I can also mine GRIN on other RTX2070 cards. Anyone have any idea why?

Miner crashing on cuckarood29? Have you tried on stock GPU settings?
Btw update for cuckarood29 almost done, it will yield +10% performance grow

[Semtex72]

In newer versions, the miner is crashing with my palit RTX 2070's mining GRIN. Tried updating the drivers, but no luck. Older version works, and e.g. BEAMV2 is working for the latest version. I can also mine GRIN on other RTX2070 cards. Anyone have any idea why?

Miner crashing on cuckarood29? Have you tried on stock GPU settings?
Btw update for cuckarood29 almost done, it will yield +10% performance grow

AS many time before it was a riser issue, and not even on the cards tested. Very strange that it only affected GRIN.

Looking fwd to that new version, a game changer!

[notsure85]

In newer versions, the miner is crashing with my palit RTX 2070's mining GRIN. Tried updating the drivers, but no luck. Older version works, and e.g. BEAMV2 is working for the latest version. I can also mine GRIN on other RTX2070 cards. Anyone have any idea why?

Miner crashing on cuckarood29? Have you tried on stock GPU settings?
Btw update for cuckarood29 almost done, it will yield +10% performance grow

AS many time before it was a riser issue, and not even on the cards tested. Very strange that it only affected GRIN.

Looking fwd to that new version, a game changer!

I have the same with mining beam on a rtx 2080 rig, almost instantly gpus crash and are dropped. Only way to recover is a cold boot.
MTP is running fine for weeks.

Think I will have to take a look at the risers aswell.

[Semtex72]

In newer versions, the miner is crashing with my palit RTX 2070's mining GRIN. Tried updating the drivers, but no luck. Older version works, and e.g. BEAMV2 is working for the latest version. I can also mine GRIN on other RTX2070 cards. Anyone have any idea why?

Miner crashing on cuckarood29? Have you tried on stock GPU settings?
Btw update for cuckarood29 almost done, it will yield +10% performance grow

AS many time before it was a riser issue, and not even on the cards tested. Very strange that it only affected GRIN.

Looking fwd to that new version, a game changer!

I have the same with mining beam on a rtx 2080 rig, almost instantly gpus crash and are dropped. Only way to recover is a cold boot.
MTP is running fine for weeks.

Think I will have to take a look at the risers aswell.

It's an odd world. On another rig, the only coin not working was MTP. This I concluded was that there was not enought speed on the M2 Riser. With the message about increased GRIN speed, I just hade to order a RTX 2070 Super. Will it do 10 ... Currently minning @ 247.7 Gp/s with GMiner GRIN.

[Saverenergy]

In newer versions, the miner is crashing with my palit RTX 2070's mining GRIN. Tried updating the drivers, but no luck. Older version works, and e.g. BEAMV2 is working for the latest version. I can also mine GRIN on other RTX2070 cards. Anyone have any idea why?

Miner crashing on cuckarood29? Have you tried on stock GPU settings?
Btw update for cuckarood29 almost done, it will yield +10% performance grow

If you use the cuckaroo31 algorithm for mining GRIN coin, then I have the same problem. When I using the cuckaroo29 algorithm everything works fine.

[ekiller]

Hello,

What is   --algo parameter for  BEAMv2   ?

--algo beam   or  --algo beamv2   ?

[arielbit]

Hello,

What is   --algo parameter for  BEAMv2   ?

--algo beam   or  --algo beamv2   ?

--algo beamhash

it is in the sample configs

[Semtex72]

In newer versions, the miner is crashing with my palit RTX 2070's mining GRIN. Tried updating the drivers, but no luck. Older version works, and e.g. BEAMV2 is working for the latest version. I can also mine GRIN on other RTX2070 cards. Anyone have any idea why?

Miner crashing on cuckarood29? Have you tried on stock GPU settings?
Btw update for cuckarood29 almost done, it will yield +10% performance grow

If you use the cuckaroo31 algorithm for mining GRIN coin, then I have the same problem. When I using the cuckaroo29 algorithm everything works fine.

The RTX 2070 Super was a bit dissapointing on BEAM on the same wattage (+5%). GRIN not to bad, passing 8 G/s.

Any news on the new version?

[Zminer777]

Any news on the new version?

we are working hard on update, hope we will release update on this week.

[Saverenergy]

Hello,

What is   --algo parameter for  BEAMv2   ?

--algo beam   or  --algo beamv2   ?

For normal operation of the miner and mining of Beam coins, you need to use the algorithm function   --algo beamhash

[Zminer777]

GMiner v1.66 available for download

v1.66
+ significant performance improvements for cuckarood29 (+10%)

Performance on stock GPU settings:
Cuckarood29:
Palit GTX 1060 JetStream 6GB ~3.65 G/s
Gigabyte GTX 1660 Ti OC 6GB ~5.26 G/s
Palit GTX 1070 Dual 8GB ~5.26 G/s
Palit GTX 1070 Ti JetStream 8GB ~5.82 G/s
MSI GTX 1080 SEA HAWK EK X 8GB ~5.82 G/s
Gigabyte GTX 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~9.17 G/s
Palit RTX 2060 Dual 6GB ~6.75 G/s
MSI RTX 2070 Armor 8GB ~8.4 G/s
MSI RTX 2080 DUKE 8GB ~10 G/s

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/1.66

[Saverenergy]

Wow! A new update with increased Grin mining performance on Cuckarood29, I must be tested it. They promise plus 10%.

[SecretRecipe]

v1.66 speeds on grin are awesome.. I wish we could use OC1 for grin =]

[Semtex72]

Excellent. The RTX 2070 Super is passing 9. Other cards performing very well as well.

[2h4u]

pretty rad

+15% on 1066
+17% on 1050ti

[2h4u]

@Zminer777 is it possible to make c29d lean solver for 1063? Original grinminer, the ancient one, got it covered.