[XC][XCurrency] Decentralised Trustless Privacy Platform / Encrypted XChat / Pos

[BADASS]

Hope Dev gets a good rest tonight. We all know how exhausting crypto gets.
I totally blew a fuse the other night. Bottle of WT didn't help, lols.

I like that logo too, but maybe even better in a square?

[jasemoney]

it's working people wooohooo!  
I send 1 real XC to address XSQYYwgVVYoGyc23NCTcCvQRCNiidarU71 using:

Code:

walletpassphrase <my password> 60
sendfrommixer "1" XSQYYwgVVYoGyc23NCTcCvQRCNiidarU71 1.0

now try to find my fucking sender address  

I tried with sendfrommixer main <address> 5
and with just 1.
the 1 arrived, the 5 didnt but i must have typed it wrong :/ fml

*edit, sent a non mixer test to the address i might have mistyped.  shows up on my MAC but not my pc where i sent from :/

[syypro]

 ;Dgreat work,,,,
Let's to da moooooooooooooooooooooooooooooooooooooon~~~

[battbot]

Hello people,
So i started an xnode via the batch file for main net on a wallet with 1500 coins.. its synced and just sitting there. I didn't expect much action.  Anyways i remember the sendfrommixer command so i was going to try some sample mixes.  first issue, the wallet created like 5 addresses, so i chose to send from the first, vanity gen'd up a receiver address so i can verify in the blockchain its anon and import the key after to make sure it came back to me  anyways it says code 6 insufficient funds.
does the xnode use more than 1000 coins if they are available to it?

label the address and use
"sendfrommixer" <label> <receiving address> <amount>

I believe they do not want you to specify your address for a reason.

thanks, sent fine, 5xc broke up into 6 transactions, theyre unconfirmed (4 of 6) i cant check them because the blockchain explorer isnt correct yet.  I imported my private key for the other address and am waiting for them to arrive (did rescan / reindex)

On my test it appeared that the transfer did not show on the other end until it confirmed from the sending end. Not sure is it will stay this way atcsecure will have to let us know. It kind of makes sense to me though as the node should probably not send it on until it knows for sure the transfer is good. Maybe I ma wrong but I believe that is what is happening.

I cannot believe this is still only at 0.002 that is just crazy in my opinion. We have anonymous transfer with Xnode tech which is easy to setup for anyone. This is an amazing amount of progress in a very short time.

+1

[7vpo]

Hello people,
So i started an xnode via the batch file for main net on a wallet with 1500 coins.. its synced and just sitting there. I didn't expect much action.  Anyways i remember the sendfrommixer command so i was going to try some sample mixes.  first issue, the wallet created like 5 addresses, so i chose to send from the first, vanity gen'd up a receiver address so i can verify in the blockchain its anon and import the key after to make sure it came back to me  anyways it says code 6 insufficient funds.
does the xnode use more than 1000 coins if they are available to it?

label the address and use
"sendfrommixer" <label> <receiving address> <amount>

I believe they do not want you to specify your address for a reason.

thanks, sent fine, 5xc broke up into 6 transactions, theyre unconfirmed (4 of 6) i cant check them because the blockchain explorer isnt correct yet.  I imported my private key for the other address and am waiting for them to arrive (did rescan / reindex)

On my test it appeared that the transfer did not show on the other end until it confirmed from the sending end. Not sure is it will stay this way atcsecure will have to let us know. It kind of makes sense to me though as the node should probably not send it on until it knows for sure the transfer is good. Maybe I ma wrong but I believe that is what is happening.

I cannot believe this is still only at 0.002 that is just crazy in my opinion. We have anonymous transfer with Xnode tech which is easy to setup for anyone. This is an amazing amount of progress in a very short time.

+1

Give a little time to peoples. Then it will bounce...

[nathalie20]

Gentlemen, what is the correct Logo XC?

[CryptoGretzky]

Gentlemen, what is the correct Logo XC?

We are still looking for a logo through a logo contest that has been extended by 48 hours. 

[Pizpie]

Gentlemen, what is the correct Logo XC?

We are still looking for a logo through a logo contest that has been extended by 48 hours. 

[DRobert]

How can we tell if coins bought on Poloniex today is on the right fork?

[zedomax]

Just want to confirm that the xnodes seem to be working as expected. I have sent a transaction from one wallet to another through the xnodes and in reviewing the transaction on either end cannot see the sending or receiving address. The block explorer is still down and when it gets back I will check it out further with it.

One thing I noticed is the normal fee is added to the sending transaction. The anon fee which is 0.00001 is then subtracted from the amount sent. So the receiver gets the amount sent - 0.00001. Might we want to have this fee included in the amount so the receiving end gets the full amount sent?

I know the above is a very small concern. The key is the nodes are running and my trans action went through without a hitch. I know Atcsecure is going to give us more info tomorrow but thought this was great news and should be shared.

Great work by the dev!


edit: This was on the live network, with real funds, sent to and from non xnode wallets

TOTHEMOON!

[7vpo]

XC trolls stopped on DRK thread.

Now you can't speak.

[DRobert]

How can we tell if coins bought on Poloniex today is on the right fork?

Answer plz

[benthach]

why don't you ask Poloniex support?

How can we tell if coins bought on Poloniex today is on the right fork?

Answer plz

[jaft16]

I'm so glad I decided to invest in this coin/ project.
I'm a noob in this area but so far the Dev as delivered and we are in for the long run.
So far I've kept my coins in Mp but might move it to the new wallet so I can start learning on how to use it properly. I'm really hoping that now the crypto community start to believe in us and realise the potential of this project, this could be crypto history in the making. Hala XC

[studio1one]

new wallet stuck on 23 blocks remaining, won't update anymore. Anyone else had same issue?

[Pizpie]

Thanks for all the feedback guys. Logos are looking pretty nice too!
Join us for some live chat: http://webchat.freenode.net/?channels=#XCofficial
Subscribe for the latest news, release, and discussion. http://www.reddit.com/r/XCofficialreddit/

-XC Community Mod

[Pizpie]

new wallet stuck on 23 blocks remaining, won't update anymore. Anyone else had same issue?

Refer to here for the latest wallet release: https://bitcointalk.org/index.php?topic=630547.0
Make sure to add the nodes to your config file.
I upgraded yesterday and by following those instructions, have had no issue.
If it gets stuck on synchronizing, close the client and restart it.
Hope this fixes your issue.

-XC Community Mod

[tat123]

new wallet stuck on 23 blocks remaining, won't update anymore. Anyone else had same issue?

Wallet was an issue last night. Waited hours for coins to send. Now its quick. Feels like a BC wallet. Feel confident that coins will send and arrive.

[chaeplin]

What is correct block height ?

http://cryptexplorer.com/chain/X11Coin has 23553
http://chainz.cryptoid.info/xc/ has 23457

[benthach]

i believed this is correct. all of my 5 wallets have the same block

What is correct block height ?

http://cryptexplorer.com/chain/X11Coin has 23553