YamashitaRen
|
|
February 24, 2016, 06:45:15 PM |
|
Okay, after gradually going back to 14.6 driver and hoooouuurs of testing (blame the catalyst linux hell), I can confirm that the new kernel doesn't work when the old one does (on my rig). Which means that I'll keep my old bin for the time being edit : to be more exact about what happens, a bin is generated and then my GPUs quickly become "SICK".
|
|
|
|
pallas
Legendary
Offline
Activity: 2716
Merit: 1094
Black Belt Developer
|
|
February 24, 2016, 08:45:00 PM |
|
Okay, after gradually going back to 14.6 driver and hoooouuurs of testing (blame the catalyst linux hell), I can confirm that the new kernel doesn't work when the old one does (on my rig). Which means that I'll keep my old bin for the time being edit : to be more exact about what happens, a bin is generated and then my GPUs quickly become "SICK". It works for me. Linux + 15.12
|
|
|
|
YamashitaRen
|
|
February 24, 2016, 10:36:02 PM Last edit: February 24, 2016, 10:59:02 PM by YamashitaRen |
|
I don't know if I should be happy about that or not... Well, thanks for the info anyway edit : problem found, it works with default parameters. Thanks Pallas !
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
February 26, 2016, 08:26:03 PM |
|
reserved
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
cidman
|
|
February 27, 2016, 02:40:39 AM Last edit: February 27, 2016, 12:47:36 PM by cidman |
|
that guy was getting 15Mh with 1 390x? do the new cards do that much better than 200s or is it the new drivers? 1 of my 290x cards were doing like 8.5Mh with a slight OC last time i mined x11 with amd
edit: nevermind i dug out a windows ssd and loaded it up and saw its like 2x rates compared to last year
|
|
|
|
bluegap
Newbie
Offline
Activity: 7
Merit: 0
|
|
February 28, 2016, 05:57:20 AM Last edit: March 01, 2016, 02:40:31 AM by bluegap |
|
Anyone mining with MSI HD7790 ? (R77901GD5OC) I'm unable underclock the memory with sgminer. I tried to underclock via MSI AfterBurner but when I check in AfterBurner HWmonitor, sgminer and GPU-Z, the value remain unchanged (1500). Is there way to unlock it??
Update: Found it ! Never thought that the unofficial overclocking mode options are use for underclocking too.
|
|
|
|
alevlaslo
|
|
March 10, 2016, 10:36:33 AM |
|
Hi
my Fury X give only 8 mh on x11 and lira2rev2, but must be 20 mx, where i can get normal .bin?
|
Sale the first NFT of the first foto
|
|
|
z0n0
Legendary
Offline
Activity: 1274
Merit: 1006
|
|
March 10, 2016, 12:14:52 PM |
|
Anyone mining with MSI HD7790 ? (R77901GD5OC) I'm unable underclock the memory with sgminer. I tried to underclock via MSI AfterBurner but when I check in AfterBurner HWmonitor, sgminer and GPU-Z, the value remain unchanged (1500). Is there way to unlock it??
Update: Found it ! Never thought that the unofficial overclocking mode options are use for underclocking too.
Wanna share? I have the same problem and can't figure it out...
|
|
|
|
palmiris
Newbie
Offline
Activity: 4
Merit: 0
|
|
March 10, 2016, 03:04:16 PM Last edit: March 10, 2016, 03:15:44 PM by palmiris |
|
sgminer.exe is giving me 50% cpu usage. I am mining with NiceHash Miner, using AMD OpenCL mining only, with an AMD Radeon 7750 graphics card.
How can I correct the high cpu usage to normal 1-5%? I am using the blake256r8vnl algorithm.
|
|
|
|
palmiris
Newbie
Offline
Activity: 4
Merit: 0
|
|
March 10, 2016, 03:12:13 PM |
|
Anyone mining with MSI HD7790 ? (R77901GD5OC) I'm unable underclock the memory with sgminer. I tried to underclock via MSI AfterBurner but when I check in AfterBurner HWmonitor, sgminer and GPU-Z, the value remain unchanged (1500). Is there way to unlock it??
Update: Found it ! Never thought that the unofficial overclocking mode options are use for underclocking too.
I had the same problem. I solved it today. Download the new driver 16.3. AMD released it today. I can underclock my memory up to 700MHz since today. Before it stayed at stock value.
|
|
|
|
melloyellow
|
|
March 10, 2016, 04:23:14 PM |
|
Anyone mining with MSI HD7790 ? (R77901GD5OC) I'm unable underclock the memory with sgminer. I tried to underclock via MSI AfterBurner but when I check in AfterBurner HWmonitor, sgminer and GPU-Z, the value remain unchanged (1500). Is there way to unlock it??
Update: Found it ! Never thought that the unofficial overclocking mode options are use for underclocking too.
Wanna share? I have the same problem and can't figure it out... In the settings page of Afterburner, in the bottom section, check "Extend official overclocking limits", "Disable ULPS", and I use "without powerplay support" mode.
|
|
|
|
Eliovp
Legendary
Offline
Activity: 1050
Merit: 1293
Huh?
|
|
March 10, 2016, 06:59:08 PM |
|
Anyone mining with MSI HD7790 ? (R77901GD5OC) I'm unable underclock the memory with sgminer. I tried to underclock via MSI AfterBurner but when I check in AfterBurner HWmonitor, sgminer and GPU-Z, the value remain unchanged (1500). Is there way to unlock it??
Update: Found it ! Never thought that the unofficial overclocking mode options are use for underclocking too.
Wanna share? I have the same problem and can't figure it out... In the settings page of Afterburner, in the bottom section, check "Extend official overclocking limits", "Disable ULPS", and I use "without powerplay support" mode. Yup, i can confirm this. Works perfectly!
|
|
|
|
Heavyiron
Newbie
Offline
Activity: 36
Merit: 0
|
|
March 11, 2016, 07:26:04 AM |
|
In last nicehach 1.3.0 on radeon 7850 on Lyra2rev2 sgminer 5.1.0 create ckolivas bin and all shares are rejected. May be it's error with algo name which nicehash sends to sgminer. Runme.bat works fine with this algo. And may be a suggestoin for the next nicehash: do not hide miner windows during benchmark (option in settings?). Sometimes it's interesting to know what happens in any moment.
|
|
|
|
AngryDwarf
|
|
March 15, 2016, 05:33:30 AM |
|
How does one build a linux binary from a release tarball and not directly from the latest git clone? I've found the windows 5.3.0 release binary to have a detrimental impact on the qubit algo compared to the 5.2.1 version. Not tried others yet. Both the linux release brinay and a linux build core dumps on most algo's on my linux system, hence I would like to try to build the 5.2.1 version on linux.
|
|
|
|
|
tankist0
|
|
March 15, 2016, 06:37:23 AM |
|
I hear several algos break pretty bad on Tonga cards - which there are quite a few of, now. 285, 380, 380X...
What do you mean by that? Certain algo optimizations for Tonga aren't giving expected results? If so I have few Tongas, but haven't played with them enough. Couldn't start the optimized win-32-bit shit at all, on stock 64-bit sgminer Tonga hashes way slower comparing to Tahiti ... although temps rarely exceed 50 degrees
|
|
|
|
AngryDwarf
|
|
March 15, 2016, 01:25:57 PM |
|
Not much luck either way. Worse still, now even the 5.3.0 X11 algo core dumps, so now I have no working miner for my AMD card. The 5.2.1 tree won't compile (after copying the jansson sub module across), complaining about a lyra2re reference in algorithm.o. Using AMD APP SDK 3.0, ADL 9.0, and latest fglrx-core AMD drivers on Ubuntu 14.04 LTS. Main card is nvidia, and full fglrx wants to remove the nvidia drivers due to a shared xorg dependency. This means ADL doesn't actually work. But I can't understand why the X11 algo doesn't work now. If I've git clone several sgminer versions into the same directory, removing them with rm -rf, has this confused git in some way? What would I need to do to clean it up?
|
|
|
|
AngryDwarf
|
|
March 15, 2016, 11:57:47 PM |
|
This is the exact error message I get trying to build sgminer 5.2.1 CCLD sgminer sgminer-algorithm.o:(.data+0x1058): undefined reference to `lyra2rev2_regenhash' collect2: error: ld returned 1 exit status
|
|
|
|
AngryDwarf
|
|
March 16, 2016, 02:36:29 AM |
|
This is the exact error message I get trying to build sgminer 5.2.1 CCLD sgminer sgminer-algorithm.o:(.data+0x1058): undefined reference to `lyra2rev2_regenhash' collect2: error: ld returned 1 exit status This is fixable! Give me a minute, I'll clone NH's repo on Freya, check out the 5.2.1 tag, and do it myself so I can give clear, exact instructions on fixing it - I'll do a quick test on mining with it, too. Thanks! Managed to FU my linux install trying to put on the full fglrx drivers from the .run file. Seems to be a problem with the xorg file but I can't work out what. Would be good to have ADL to OC the AMD card.
|
|
|
|
AngryDwarf
|
|
March 16, 2016, 10:55:07 AM |
|
This is the exact error message I get trying to build sgminer 5.2.1 CCLD sgminer sgminer-algorithm.o:(.data+0x1058): undefined reference to `lyra2rev2_regenhash' collect2: error: ld returned 1 exit status This is fixable! Give me a minute, I'll clone NH's repo on Freya, check out the 5.2.1 tag, and do it myself so I can give clear, exact instructions on fixing it - I'll do a quick test on mining with it, too. Thanks! Managed to FU my linux install trying to put on the full fglrx drivers from the .run file. Seems to be a problem with the xorg file but I can't work out what. Would be good to have ADL to OC the AMD card. Didn't test mining, but add this to the end of Makefile.am and redo autogen.sh: sgminer_SOURCES += algorithm/lyra2rev2.c algorithm/lyra2rev2.h algorithm/lyra2v2.c algorithm/lyra2v2.h algorithm/spongev2.c algorithm/spongev2.h
Thanks. Will give it a try once I've got my linux setup happy again.
|
|
|
|
|