Claymore's CryptoNote AMD GPU Miner v11.3

[gusknure]

v 10.2
driver 16.9.2
NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940

Max 760 h\s per card 480x
Why I can reach 900 ?
What I need to do ?

on eth I have 30+-

[IojkinKot]

v 10.2
driver 16.9.2
NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940

Max 760 h\s per card 480x
Why I can reach 900 ?
What I need to do ?

on eth I have 30+-

Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h

[gusknure]

v 10.2
driver 16.9.2
NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940

Max 760 h\s per card 480x
Why I can reach 900 ?
What I need to do ?

on eth I have 30+-

Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h

Thanks

[MegaRipZ]

My words apply again - stop using those insanely old AMD drivers...

Wolf0, I install Ubuntu 16.04.3 with amdgpu-pro-16.60-379184. In Claymore's 9.1 I have ~440H/s with Pitcairn GPU (Radeon R7 370) and in new Claymore's miner (10.2) I have only 206-207H/s. Is it Pitcairn's bug on new version? HD 7950 woking well in new version, but have a slower H/s.

[NewbieMiner17]

v 10.2
driver 16.9.2
NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940

Max 760 h\s per card 480x
Why I can reach 900 ?
What I need to do ?

on eth I have 30+-

Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h

Is this for 4gb or 8gb cards? I have blockchain drivers, 480 Nitro+ 4GB modded to around 1250c 2000m. Only getting around 750h/s...

I tried looking at strapping the memory myself (currently using Anorak Memshift) but I'm not confident enough I fully understand the areas I need to modify. There is 1:1500, 1:1650, 1:750.... but then theres 2:1500, 2:1650 etc. Should I be copying the line 1:1500 to all the other 1's (up to 2000 that is)then doing the same with the 2s?

[Call_Me_Bambi]

v 10.2
driver 16.9.2
NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940

Max 760 h\s per card 480x
Why I can reach 900 ?
What I need to do ?

on eth I have 30+-

Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h

Is this for 4gb or 8gb cards? I have blockchain drivers, 480 Nitro+ 4GB modded to around 1250c 2000m. Only getting around 750h/s...

I tried looking at strapping the memory myself (currently using Anorak Memshift) but I'm not confident enough I fully understand the areas I need to modify. There is 1:1500, 1:1650, 1:750.... but then theres 2:1500, 2:1650 etc. Should I be copying the line 1:1500 to all the other 1's (up to 2000 that is)then doing the same with the 2s?

If you are unsure about how to apply the straps then use the 'One Click Timing' feature of Polaris Bios Editor. This will automatically set the timing straps. I've used it many times on a variety of cards and it work great.
Latest version here..
https://github.com/jaschaknack/PolarisBiosEditor

[sergey777]

7870 - 412 h\s 

[ingyenfrag]

Hey Claymore!

Do you have any idea when will you release the vega optimized version which uses a multi thread support?
Days? Weeks? Months?

I'm really excited about it.

[garytheasshole]

7870 - 412 h\s 

You're probably better off with the 9.x version on that GPU

[carlo_0000]

v 10.2
driver 16.9.2
NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940

Max 760 h\s per card 480x
Why I can reach 900 ?
What I need to do ?

on eth I have 30+-

Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h

Is this for 4gb or 8gb cards? I have blockchain drivers, 480 Nitro+ 4GB modded to around 1250c 2000m. Only getting around 750h/s...

I tried looking at strapping the memory myself (currently using Anorak Memshift) but I'm not confident enough I fully understand the areas I need to modify. There is 1:1500, 1:1650, 1:750.... but then theres 2:1500, 2:1650 etc. Should I be copying the line 1:1500 to all the other 1's (up to 2000 that is)then doing the same with the 2s?

are you sure you can do better than 750h on 4Gb version ?  because double thread won't work on 4gb version

i have the 1375 timing if i remember with max 1870 memory (they start at 1900 when new but now had to get them down because memory errors)
i tested all the traps last year that was the fastest one on monero with claymore 9.7 i think, so i have around 735h/s

[IojkinKot]

v 10.2
driver 16.9.2
NsGpuCNMiner.exe -xpool pool -xwal wal -xpsw x -di 01 -tstop 65 -dmem 1 -allpools 1 -h 940

Max 760 h\s per card 480x
Why I can reach 900 ?
What I need to do ?

on eth I have 30+-

Use blockchain drivers, modified straps, core 1250 and above, and my settings -dmem and - h

Is this for 4gb or 8gb cards? I have blockchain drivers, 480 Nitro+ 4GB modded to around 1250c 2000m. Only getting around 750h/s...

I tried looking at strapping the memory myself (currently using Anorak Memshift) but I'm not confident enough I fully understand the areas I need to modify. There is 1:1500, 1:1650, 1:750.... but then theres 2:1500, 2:1650 etc. Should I be copying the line 1:1500 to all the other 1's (up to 2000 that is)then doing the same with the 2s?

are you sure you can do better than 750h on 4Gb version ?  because double thread won't work on 4gb version

i have the 1375 timing if i remember with max 1870 memory (they start at 1900 when new but now had to get them down because memory errors)
i tested all the traps last year that was the fastest one on monero with claymore 9.7 i think, so i have around 735h/s

http://i92.fastpic.ru/big/2017/1021/a3/323cde4a6b5c286c2e6833dded122aa3.png

[Grinner888]

how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?

[IojkinKot]

how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?

Read my previous messages

[carlo_0000]

how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?

Read my previous messages

and what straps do you use ?
i tested the setting i only get 750h  my memory is limited to 1870mhz currently on 1375straps i think
can you check what speed you have if you put memory one 1870 ?

[IojkinKot]

how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?

Read my previous messages

and what straps do you use ?
i tested the setting i only get 750h  my memory is limited to 1870mhz currently on 1375straps i think
can you check what speed you have if you put memory one 1870 ?

Uber 3.1 straps for samsung and 1500 modified straps for hynix

[adlian]

My first post here ,

does it works with nanopool.org , pls help me to config the bath file (Bulgaria , Europe) AMD cards 470 , 480 , 8 Gb

[Call_Me_Bambi]

My first post here ,

does it works with nanopool.org , pls help me to config the bath file (Bulgaria , Europe) AMD cards 470 , 480 , 8 Gb

There is a help page on Nanopool that shows what you need to do for configuring Claymore to work with Nanopool;
https://xmr.nanopool.org/help

Example Nanopool .bat settings.

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

(to mine to your own wallet)
NsGpuCNMiner.exe -xpool ssl://xmr-eu1.nanopool.org:14433 -xwal ADDRESS.WORKER -xpsw x -ftime 10 -h 0 -dmem -1

(to mine to an exchange)
NsGpuCNMiner.exe -xpool ssl://xmr-eu1.nanopool.org:14433 -xwal ADDRESS.PAYMENT-ID.WORKER -xpsw x -ftime 10 -h 0 -dmem -1

..but I would recommend using Mining Pool Hub (MPH) https://miningpoolhub.com/ there is a lot of support available for MPH at https://bitcointalk.org/index.php?topic=472510.0

This is my Claymore .bat file configuration for MPH to mine Monero.

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_SINGLE_ALLOC_PERCENT 100
setx GPU_MAX_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal USERNAME.WORKERNAME -xpsw x  -ftime 10 -h 0 -dmem -1

[Eisenkopf89]

@Claymore, Hi! Is it possible to add support for older cards? HD Series 69xx

v10 supports only ASM mode, so old cards are not supported, also RX550 is not supported currently.
I can add non-ASM mode but it will work slowly, so it's better to use v9.7 for cards that are not supported by v10.

It would be nice if the new version works with the RX550

[carlo_0000]

how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?

Read my previous messages

and what straps do you use ?
i tested the setting i only get 750h  my memory is limited to 1870mhz currently on 1375straps i think
can you check what speed you have if you put memory one 1870 ?

Uber 3.1 straps for samsung and 1500 modified straps for hynix

ok thanks i will try 1500 trap

[Grinner888]

how about RX 470 4GB? I can only seem to get 770h/s is it possible to hit 900 h/s?

Read my previous messages

I can't find  any related to RX470. anyway I am using the bios I modded using 1500 straps for my hynix cards. I am getting 28 mh/s from them with ETH. with XMR running them at 1100 core / 2000 mem