Claymore's CryptoNote AMD GPU Miner v11.3

[Call_Me_Bambi]

Can anyone help me. I'm using claymore 11.2 on my RX 570  and only getting 420 h/s for Monero. My card is bios flashed overclocked and with blockchain drivers. I'm getting on the high ends for claymore ETH 29mhs and zcash 312 sols  so I'm confused why it's so insanely low in cryptonote. Also I have tried mining Monero in Minergate software for comparison and im getting 700 h/s  so I feel something is definitely wrong.

This does sound low for a RX570 on Monero, I get almost 500 h/s on an R9 270x 2GB mining Cryptonote, and 750 h/s on an RX 470 4GB.
But what I found is that the R9 270x runs much better on Claymore v9.7 than it does on v11.2, so try using earlier version of Claymore and see if that helps.

[cryptosize]

Can anyone help me. I'm using claymore 11.2 on my RX 570  and only getting 420 h/s for Monero. My card is bios flashed overclocked and with blockchain drivers. I'm getting on the high ends for claymore ETH 29mhs and zcash 312 sols  so I'm confused why it's so insanely low in cryptonote. Also I have tried mining Monero in Minergate software for comparison and im getting 700 h/s  so I feel something is definitely wrong.

This does sound low for a RX570 on Monero, I get almost 500 h/s on an R9 270x 2GB mining Cryptonote, and 750 h/s on an RX 470 4GB.
But what I found is that the R9 270x runs much better on Claymore v9.7 than it does on v11.2, so try using earlier version of Claymore and see if that helps.

v9.7 doesn't support the new algo change (v7).

[Call_Me_Bambi]

Can anyone help me. I'm using claymore 11.2 on my RX 570  and only getting 420 h/s for Monero. My card is bios flashed overclocked and with blockchain drivers. I'm getting on the high ends for claymore ETH 29mhs and zcash 312 sols  so I'm confused why it's so insanely low in cryptonote. Also I have tried mining Monero in Minergate software for comparison and im getting 700 h/s  so I feel something is definitely wrong.

This does sound low for a RX570 on Monero, I get almost 500 h/s on an R9 270x 2GB mining Cryptonote, and 750 h/s on an RX 470 4GB.
But what I found is that the R9 270x runs much better on Claymore v9.7 than it does on v11.2, so try using earlier version of Claymore and see if that helps.

v9.7 doesn't support the new algo change (v7).

It's a pitty v9.7 won't support the Monero algo change. I've been mining Electroneum for a while as I find it more profitable than Monero but, of course, when the Cryptonote ASICs start en-mass all current Cryptonote coins will be effectively unminable by GPU's unless they too change algo. There was a warning not to buy these ASICs as the Cryptonote coins will change algo and you will be left with a very expensive brick.

[stonedgz]

hey guys can you help me with this


so i have 8 GPU rig mix  when i mine ethash its fine and stable but when i change to cryptonote\cryptonight the Nvidia cards not working claymore dnt recognize them is it coz this miner for AMD or is there any other problem causing claymore not to recognize ??


windows 10

[Bulitt]

Can anyone help me. I'm using claymore 11.2 on my RX 570  and only getting 420 h/s for Monero. My card is bios flashed overclocked and with blockchain drivers. I'm getting on the high ends for claymore ETH 29mhs and zcash 312 sols  so I'm confused why it's so insanely low in cryptonote. Also I have tried mining Monero in Minergate software for comparison and im getting 700 h/s  so I feel something is definitely wrong.

This does sound low for a RX570 on Monero, I get almost 500 h/s on an R9 270x 2GB mining Cryptonote, and 750 h/s on an RX 470 4GB.
But what I found is that the R9 270x runs much better on Claymore v9.7 than it does on v11.2, so try using earlier version of Claymore and see if that helps.

v9.7 doesn't support the new algo change (v7).

It's a pitty v9.7 won't support the Monero algo change. I've been mining Electroneum for a while as I find it more profitable than Monero but, of course, when the Cryptonote ASICs start en-mass all current Cryptonote coins will be effectively unminable by GPU's unless they too change algo. There was a warning not to buy these ASICs as the Cryptonote coins will change algo and you will be left with a very expensive brick.

All we can do is hope Claymore feels like going above and beyond and follow through with his idea to re-include the old binaries for the cards that stopped being supported post-9.7 (HD 5000+6000 series, including HD 6990 which is still fairly widely used) The older binaries for the early GCN cards (7000, R9 200 series) also seemed to work "optimally" with 10.2 and earlier. My hobby rig is currently sitting in the limbo, and Ive already switched coins on both cards just because the older HD 6950 will no longer provide its break-even hashrate of 200H/sec. Id like to continue to mine monero on both cards (HD 6950 + R9 270X) but if I cannot on the Cayman card then the Pitcairn card is not worth it alone to mine monero.

If anyone wants to know I switched to neoscrypt with the HD 6950, nsgminer is still compatible, and Im using Claymore's Zcash/BTG to mine equihash on the R9 270X.

[Jbodz83]

did claymore release a statement on when is he going to release the new miner of monero for the new algo?

[MaxMidnite]

This is the error I keep getting: GpuMiner dk2an0 failed -4?
Other Claymore miner is fine?

I figured out the issue, I had to increase more virtual memory! (BUG)
I used 6 cards and with Claymore Ether (11.5) not CryptoNote miner
The need to increase Virtual memory was not a must, no issues etc.
My memory now is currently set for 12 cards even if using 6.
Hope Claymore guy sees this...

[miner2k18]

yea i have tried everything but i get way below average hashrates on cryptonote for my RX 570. This is especially odd considering I get top of the line hashrates on all the other algorithms for a RX 570. So yeah not sure what to do about it, especially if I can't even use old claymores cuz of the algo changes.

[mayers8851]

did claymore release a statement on when is he going to release the new miner of monero for the new algo?

He said he will update miners but did not say when: https://bitcointalk.org/index.php?topic=647251.msg32659476#msg32659476

[sleepdog]

This does sound low for a RX570 on Monero, I get almost 500 h/s on an R9 270x 2GB mining Cryptonote, and 750 h/s on an RX 470 4GB.
But what I found is that the R9 270x runs much better on Claymore v9.7 than it does on v11.2, so try using earlier version of Claymore and see if that helps.

I have the same card (R9 270X, but with 4GB) and haven't found v9.7 to be quicker than v11.2, the opposite in fact. So there's probably something else influencing the performance. I get 470H/s with v11.2.

[Call_Me_Bambi]

This does sound low for a RX570 on Monero, I get almost 500 h/s on an R9 270x 2GB mining Cryptonote, and 750 h/s on an RX 470 4GB.
But what I found is that the R9 270x runs much better on Claymore v9.7 than it does on v11.2, so try using earlier version of Claymore and see if that helps.

I have the same card (R9 270X, but with 4GB) and haven't found v9.7 to be quicker than v11.2, the opposite in fact. So there's probably something else influencing the performance. I get 470H/s with v11.2.

Definately something strange going on.
I too have an R9 270x 4GB (it's on my main 'working' PC and not used to mine) and a quick test (overclocked with Afterburner) shows that v9.7 gave 487 h/s and v11.2 gave 463 h/s - did the test twice with same results, go figure ?

[notbatman]

^^^ 9.7 uses the OpenCL drivers from whatever drivers you have installed, 11.2 uses custom assembler binaries I believe.



Also I'd like to know if the new XMR algo is going to be implemented in a timely release?

[generalt]

^^^ 9.7 uses the OpenCL drivers from whatever drivers you have installed, 11.2 uses custom assembler binaries I believe.



Also I'd like to know if the new XMR algo is going to be implemented in a timely release?

Same here. I'm hoping to get my miners up and ready before the fork.

[vikstar1000]

Claymore dude, I'm making the move to neoscrypt can't we get a multi-algorithm miner including this? Please merge all your miners!!!!

Neoscrypt is looking more profitable now, the current miners are not great so I'm sure Claymore could do better.

[UnclWish]

For me on 270X 4Gb version 11.2 with -dmem 1 option and -h 460 gives the best speed 500+.

[Sam123]

Hi Claymore or anybody. 
Which miner is best to mine Zero Coin on Windows using RX580 please. I have the same question please mining Hush Coin
Thanks

[notbatman]

^^^ 9.7 uses the OpenCL drivers from whatever drivers you have installed, 11.2 uses custom assembler binaries I believe.



Also I'd like to know if the new XMR algo is going to be implemented in a timely release?

Same here. I'm hoping to get my miners up and ready before the fork.

I don't know about you but I'm excited about all the ASICs and botnets getting BTFO.

[AVP]

I'm facing a very strange issue and need some help please.

I have 2 rights with 5 x RX 470 ea. Both run perfectly stable mining ETH + SIA.

But when I try CryptoNote miner with same OC & Undervolt what happens is that the GPU 0 (first GPU) always has either 0H or 16-20H, all other cards work fine. But eventually the miner will crash because of GPU 0.

If I disable GPU 0, then the same problem happens to GPU 1 and so on.

This happens on both mining rigs so I dont think its a hardware problem.

Any reason why 1st GPU (GPU-0) would always show 0H? And how would I fix this?

Thanks in advance!

[a7med918]

Dears
i try to restart miner every 10 min using -r 10 command but it doesn't work
any help

[UnclWish]

Dears
i try to restart miner every 10 min using -r 10 command but it doesn't work
any help

As I know minimum -r parameter is 20.