exortis
|
|
February 03, 2017, 02:28:51 PM |
|
hi friends RX 480 8gb for -a ? and -h ? must be
|
|
|
|
ray_saeed
Jr. Member
Offline
Activity: 87
Merit: 1
|
|
February 03, 2017, 05:53:40 PM |
|
i use the 1375 timing bios @ 1920 memory for 767mh stable for more than a day for the sapphir 470 4G if your board support higher memory speed than speed faster but mine it s 1930 for the worse and 1950 for the best so i run 1920
Are your cards Hynix, Elpida or Samsung?
|
|
|
|
wacko
Legendary
Offline
Activity: 1106
Merit: 1014
|
|
February 03, 2017, 06:05:59 PM |
|
1375 strap timings at ~ 1900 MHz sounds very much like Hynix.
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
|
February 03, 2017, 06:07:44 PM |
|
i use the 1375 timing bios @ 1920 memory for 767mh stable for more than a day for the sapphir 470 4G if your board support higher memory speed than speed faster but mine it s 1930 for the worse and 1950 for the best so i run 1920
Are your cards Hynix, Elpida or Samsung? Hynix @ 1750 i had a 480 Elpida but i send it back for an 470 Hynix, was not able too mod that bios
|
|
|
|
ginmac
Newbie
Offline
Activity: 43
Merit: 0
|
|
February 04, 2017, 09:40:34 AM |
|
Hi, what settings for Dwarfpool - vardiff? I still only fixed 10000 (port: 8050).
|
|
|
|
|
Termie
|
|
February 04, 2017, 11:39:24 AM |
|
Hi, what settings for Dwarfpool - vardiff? I still only fixed 10000 (port: 8050).
There are no diff setting for Dwarfpool. All ports working with fixed 10000 there, for whatever reason.
|
|
|
|
jesup
Newbie
Offline
Activity: 2
Merit: 0
|
|
February 04, 2017, 12:54:57 PM Last edit: February 04, 2017, 01:28:34 PM by jesup |
|
Hello. I'm using 3 miners for XMR: - Claymore's CryptoNote GPU miner 9.7 on ref. radeon 6970 2gb.
- Claymore's CPU miner (set 6 threads) on 6C-12T Xeon X5650 @ 4GHz, tripple channel DDR3-1809 10-12-12-28-1T, 3.5Ghz Northbridge
- and the last one is tsiv cuda miner on Palit JetStream GTX 1070
The first gives about 400 H/s, the second 260 H/s and the last one shows about a 430 H/s. So, the question is why gtx 1070 sux that much compared to the 6 years old HD6970? At the same time CPU works too well compared to GPU-s. This way used 6970 looks like a nice choice in case of free energy.
|
|
|
|
wacko
Legendary
Offline
Activity: 1106
Merit: 1014
|
|
February 04, 2017, 01:40:23 PM |
|
So, the question is why gtx 1070 sux that much compared to the 6 years old HD6970? I think the reason is that no one really worked hard on a cryptonight miner that is efficient with nvidia Pascal cards. It's not that nvidia sucks at XMR in general, GTX 750 Ti for example were pretty good at it (and might actually be a better purchase than HD6970 if power consumption matters). P.S. I've just sent you a PM about CPU mining (since it's offtopic here).
|
|
|
|
bitkachu
Newbie
Offline
Activity: 10
Merit: 0
|
|
February 04, 2017, 03:56:54 PM |
|
Hi all,
I have 2 rigs for testing. First with just single SAPPHIRE RX470 8GB, second with two SAPPHIRE RX470 8GB Heres the weird part... I used 60 minutes as a scale to test
First Rig: Speed: 690 h/s, Total Shares: 394, Rejected 0, Mining time: 01:00
Second Rig: Speed: 1378 h/s, Total Shares: 397, Rejected 0, Mining time: 01:00
Is this behavior normal? Both number of total shares are almost the same
|
|
|
|
ccccccc7
|
|
February 04, 2017, 04:17:48 PM |
|
Can anyone care to explain the terms SHARE FOUND (target 6156) vs SHARE FOUND (target 12121)? Target 6156 is from single GPU rig whereas Target 12121 is from dual GPU rig
My guess would be target=difficulties? If my guess is correct.. then it would explain why the total shares found for both single GPU and dual GPU rig is almost the same
As I understand it, share size or target size defines the target amount of hashes in a share and the lowest number of hashes the pool will accept. The larger share target on your dual GPU system is because most pools as using variable difficulty (vardiff) by default which increases the share/target size when higher hashrates are detected. This is done to reduce network load - the pool receives the same total number of hashes but in a more efficient way. I do not like vardiff and I recommend to set static difficulty where possible
|
|
|
|
Ursul0
|
|
February 04, 2017, 04:21:57 PM |
|
Hi all,
I have 2 rigs for testing. First with just single SAPPHIRE RX470 8GB, second with two SAPPHIRE RX470 8GB Heres the weird part... I used 60 minutes as a scale to test
First Rig: Speed: 690 h/s, Total Shares: 394, Rejected 0, Mining time: 01:00
Second Rig: Speed: 1378 h/s, Total Shares: 397, Rejected 0, Mining time: 01:00
Is this behavior normal? Both number of total shares are almost the same
proper vardiff maybe. what's your pool/port?
|
|
|
|
ccccccc7
|
|
February 04, 2017, 04:30:08 PM |
|
Hi all,
I have 2 rigs for testing. First with just single SAPPHIRE RX470 8GB, second with two SAPPHIRE RX470 8GB Heres the weird part... I used 60 minutes as a scale to test
First Rig: Speed: 690 h/s, Total Shares: 394, Rejected 0, Mining time: 01:00
Second Rig: Speed: 1378 h/s, Total Shares: 397, Rejected 0, Mining time: 01:00
Is this behavior normal? Both number of total shares are almost the same
proper vardiff maybe. what's your pool/port? Indeed vardiff. Shares a made up of hashes and not all shares are equal! Rig 1 Target 6156 - (6156 * 394) = 2425464 Rig 2 Target 12121 - (12121 * 394) = 4775674
|
|
|
|
exortis
|
|
February 04, 2017, 08:33:57 PM |
|
|
|
|
|
Radjs
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 05, 2017, 06:04:55 AM |
|
Hi all, "FAQ Monero payout thresholds: after authorization you also can change the threshold for wallets (both for personal and exchange ones): 10, 5, 2, 1, 0.5, 0.2 and 0.1 XMR you also can request an immediate withdrawal every time. It is independent of autopayout, but the amount should be more than 0.1 XMR " How to do it?
|
|
|
|
bitkachu
Newbie
Offline
Activity: 10
Merit: 0
|
|
February 05, 2017, 08:34:28 PM Last edit: February 05, 2017, 09:01:45 PM by bitkachu |
|
Interesting...
By modifying some settings my hash rate increased from 690 to 999! 300 h/s increase EACH CARD! Will monitor one day to see whether its stable or not So far minergate reflecting actual hashrate too!
PS: I'm using SAPPHIRE RX470 8GB OC
|
|
|
|
|
deadsix
|
|
February 05, 2017, 11:22:42 PM |
|
Low Power settings for Sapphire RX 470 4G Hynix - 700+ per card : 1100/1750 @ 890/890 and ~95W from the wall ( can go lower on mv's, experiment ) Custom Bios/Mem Straps, talk to Wolf0 for more details
|
|
|
|
equipoise
|
|
February 05, 2017, 11:35:20 PM |
|
for single card (my other rig) its up to 1.2k hash rate... it almost doubled. too good to be true? Dare to share your options?
|
|
|
|
bitkachu
Newbie
Offline
Activity: 10
Merit: 0
|
|
February 06, 2017, 06:26:18 AM |
|
Apparently the number is a lie. This morning when I wake up I have tons of negative shares and I have huge amount negative unconfirmed balance
|
|
|
|
|