Claymore's CryptoNote AMD GPU Miner v11.3

[jcpham]

add

-pow7 1

on latest version of software. but your card is older than mine!

Unfortunately same 0 H/s
Any other efficient miners for old AMD VGAs?
XMRig gives only 90H/s, whereas Claymore's 9.7 Miner was outputting 220H/s and that was very good for such an old card.

same problem here! xmrig sucks, been using claymore 9.3 FOREVER.
New version of Claymore don't have an OpenCL .bin supporting the old cards.

xmrig is the only thing I can get work on new POW and old GPUs

[1714102221]

1714102221

[1714102221]

1714102221

[1714102221]

1714102221

[Marvell2]

getting 24% rejected shares on nicehash with the claymore miner v7 any ideas ?

Have you tried other pools to see the rejection rate?

dont see rejected shares on nanopool

[STAT303954]

Hi all,

I have not used Claymore before and have just set it up for my Vega rig,

I am getting approx 1750 h/s per card with xmr-stak this was nearer 2000 h/s

The miner displays the message 'this miner is not optimised for Vega'

Can someone tell me what I need to change and where.

I have tried several settings in config but they just make things slower or not work at all.

Thanks

castXmr is very efficient for Vegas

[Ray69]

Hi all,

I have not used Claymore before and have just set it up for my Vega rig,

I am getting approx 1750 h/s per card with xmr-stak this was nearer 2000 h/s

The miner displays the message 'this miner is not optimised for Vega'

Can someone tell me what I need to change and where.

I have tried several settings in config but they just make things slower or not work at all.

Thanks

castXmr is very efficient for Vegas

Thanks, I installed castXmr and backup to speed 

What will the Network hashrate show soon I wonder 

[hack4love]

what is the best wallat for Monero Fork i need something like myetherwallet.com

[Moraen]

Ive been mining XMR with claymore 9.7 and was getting around 700h/s. After the fork, had to change the miner to 11.3 version and since then hashrate dropped to 300. using sapphire nitro+rx 580 le. I modded the bios of card to get more juice...do i have to put stock bios or update the drivers?

[Lio78]

Ive been mining XMR with claymore 9.7 and was getting around 700h/s. After the fork, had to change the miner to 11.3 version and since then hashrate dropped to 300. using sapphire nitro+rx 580 le. I modded the bios of card to get more juice...do i have to put stock bios or update the drivers?

Me too, any solution?

Thank's

[cammino]

Please, add RX 550

[pass75]

Please, add RX 550

Yes, please add support for RX550. Thank you!

[fx_spb]

AMD rx550 not work 

no ASM binary  found

Yes currently only popular cards are supported: Pitcairn, Tahiti, Hawaii, Fiji, Tonga, Ellesmere, Baffin, Vega.
I will add other cards but a bit later.

It was my favorite miner (v9.7), thank you anyway... As I see in recent readme file: "This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more" - I have some AMD HD7790 (7xxx!) cards but can't use them right now with 10.x/11.x versions on XMR ("-pow7 1"). And of cource all other old cards (57xx/58xx)
Is it no chance to support them? Please-please-please bring it back!

[hunghcm]

-pow7 1
can not mine , pls fix

[rednoW]

There are a lot cryptonight miners around that a much better than Claymore's. So if he doesn't want to continue development - leave 0% fee and exit is a right move!

[SRline]

Claymore the best!

[OhMyHolyToken]

We need Crypto-heavy.

[yatta]

There are a lot cryptonight miners around that a much better than Claymore's. So if he doesn't want to continue development - leave 0% fee and exit is a right move!

Name it.

[justoiurii]

There are a lot cryptonight miners around that a much better than Claymore's. So if he doesn't want to continue development - leave 0% fee and exit is a right move!

Name it.

https://github.com/xmrig/xmrig-amd/releases

[rednoW]

There are a lot cryptonight miners around that a much better than Claymore's. So if he doesn't want to continue development - leave 0% fee and exit is a right move!

Name it.

xmr stak
cast xmr
sgminer-gm 5-5-5
SRBminer

[dmwardjr]

Hi everyone,

I recently decided to switch all of my AMD rigs from ETH to XMR V7 on nano pool.

All of my R9 380's and R9 390's do fine when using Claymore Cryptonight GPU Miner (Latest Version for the fork).  However, my RX 480's and RX 580's do not work properly.  Only 4 [Sometimes 3] of the 7 cards for each rig mine while the others are 0.0 H/s.  This forces the rig to restart the mining process over and over again 4 times; then the rig shuts down.

I even tried switching from ssl to stratum with same results.

Is this Awesome Miner I'm using doing this or Claymore Cryptonight (latest version) on Awesome Miner?

Again, no issues with the R9 380's and R9 390's.  Only the RX 480's and RX 580's.

If someone happens to know the issue and how to fix it, I would certainly appreciate a point in the right direction.

Thanks,

David

[dmwardjr]

I am using Optiminer v212 also on Nanopool without issues.

Hi citronick,

I appreciate it.  However, I have 37 rigs and using Awesome Miner with all of them for easier management and monitoring.  Unfortunately, that particular miner is not pre-loaded on Awesome Miner.  I can upload mining software to the rigs that are not already in Awesome Miner but I was trying to avoid that for now.  Saving that as last resort.

I was looking on YouTube just before you sent your recommendation to see what's involved with setting up Cast XMR Miner 0.9.2 which is already on Awesome Miner.  So, I think I'm going to give it a try to see how it goes.

Thanks again for the quick response.

Happy Mining.

[citronick]

I am using Optiminer v212 also on Nanopool without issues.

Hi citronick,

I appreciate it.  However, I have 37 rigs and using Awesome Miner with all of them for easier management and monitoring.  Unfortunately, that particular miner is not pre-loaded on Awesome Miner.

I was looking on YouTube just before you sent your recommendation to see what's involved with setting up Cast XMR Miner 0.9.2 which is already on Awesome Miner.  So, I think I'm going to give it a try to see how it goes.

Thanks again for the quick response.

Happy Mining.

Hi David - sorry, optiminer v212 on ZEC - I misread the thread.
For XMR / Nanopool ... AMD RX470,480, R9-390 and R9-Nano, I use xmrig-amd-v2.5.2 (SMOS) without any issues.