Claymore's CryptoNote AMD GPU Miner v11.3

[mul44]

And where is the sample setup for production: XMR + Zec?

[1715279672]

1715279672

[1715279672]

1715279672

[1715279672]

1715279672

[1715279672]

1715279672

[1715279672]

1715279672

[Claymore]

Why I get

"DevFee: failed to mine for a long time, something is wrong, "nofee" mode is enabled until successful devfee mining."

It's a bug. I've removed v10.0 and will upload v10.1 in a few minutes. I made too many changes in this version, bugs are quite possible.

[agtprvctr]

This version is not so easy to use because you have to adjust "-h" and "-dmem" values often, I will try to improve it soon.
1. "-dmem 1" requires twice more memory, make sure you have enough virtual memory. For example, if you have 6 GPUs 8GB, set virtual memory to 6*8=48GB.
2. Check how much memory miner allocates, it shows something like "(Memory used: 5128MB)", make sure you have this memory on your GPU.
3. You can see low hashrate if you use almost all memory on GPU, try to reduce "-h" value a bit.

Guys if you are getting the "GpuMiner dk2an0 failed" error, be sure to note Claymore's comments above. I was initially getting the same error with my RX480 8GB rig. Lowering to -h 1024 will solve the issue but make the program only see 4GB on my cards. After changing page file to 48GB, the miner runs beautifully with default -h and -dmem settings.

Ellesmere RX480 8GB, same modded BIOS, default miner settings:
CryptoNote Miner 9.7 - 850 H/s
CryptoNote Miner 10 - 987 H/s

Thanks Claymore!

[banec]

AMD rx550 not work 

no ASM binary  found

[Coin_Miner1]

That really sucks I will have to buy larger SSDs to increase paging file to get the miner to work.

[Claymore]

IF YOU USE V10.0 - UPDATE TO V10.1.

- fixed some critical bugs.

[Claymore]

AMD rx550 not work 

no ASM binary  found

Yes currently only popular cards are supported: Pitcairn, Tahiti, Hawaii, Fiji, Tonga, Ellesmere, Baffin, Vega.
I will add other cards but a bit later.

[cvsea]

It works now with stock settings but you didn't solve the Nicehash problem.

[Claymore]

It works now with stock settings but you didn't solve the Nicehash problem.

Because I need more time for it.

[treanski]

hey claymore first of all thanks for your work...

i´ve tried out the new version vs sgminer & xmr stak amd...sorry bro but it is still not good enough at least for rx 580 8gb

restults

xmr stak + sgminer ~5500h/s - 650 watts from the wall---6*rx580 8gb @2gpu threads
claymore 10.0 ~5200h/s with dmem 1 - 650-680 watts from the wall(jumps between 650 - 680) ~5000h/s with dmem 0 and 650watts from the wall +dev fee
im not greedy and i dont care about 1% fee, but like all miners i have to look whats most profitable...

your miner with 1 gpu thread is nearly so fast like sgminer+xmrstak with 2 threads....im no coder or developer and i dont know shit about it, but if its somehow possible think about to implement mining with 2 gpu threads and your miner could the fastest ...

[snowyNNN]

This version is probably good for gpus with lots of memory like 8g and so forth.
I don´t think it´ll help my old 3g cards enough to warrant me to update the software.

[cvsea]

It works now with stock settings but you didn't solve the Nicehash problem.

Because I need more time for it.

Great. Thanks!

So increasing page file size seems to allow the miner to work with the default -h and -dmem on 8gb polaris.
Speeds are indeed now slightly better than sgminer but have to be tested poolside.

Looks good but why the weird memory doubling solution instead of just giving the posibility to set threads, worksize and intensity?

[myxamop]

hey claymore first of all thanks for your work...

i´ve tried out the new version vs sgminer & xmr stak amd...sorry bro but it is still not good enough at least for rx 580 8gb

restults

xmr stak + sgminer ~5500h/s - 650 watts from the wall---6*rx580 8gb @2gpu threads
claymore 10.0 ~5200h/s with dmem 1 - 650-680 watts from the wall(jumps between 650 - 680) ~5000h/s with dmem 0 and 650watts from the wall +dev fee
im not greedy and i dont care about 1% fee, but like all miners i have to look whats most profitable...

your miner with 1 gpu thread is nearly so fast like sgminer+xmrstak with 2 threads....im no coder or developer and i dont know shit about it, but if its somehow possible think about to implement mining with 2 gpu threads and your miner could the fastest ...

What drivers do you use?

[treanski]

blockchain drivers

[syraka76]

why does Dwarfpool not work? and with the other pools it works?

[Claymore]

hey claymore first of all thanks for your work...

i´ve tried out the new version vs sgminer & xmr stak amd...sorry bro but it is still not good enough at least for rx 580 8gb

restults

xmr stak + sgminer ~5500h/s - 650 watts from the wall---6*rx580 8gb @2gpu threads
claymore 10.0 ~5200h/s with dmem 1 - 650-680 watts from the wall(jumps between 650 - 680) ~5000h/s with dmem 0 and 650watts from the wall +dev fee
im not greedy and i dont care about 1% fee, but like all miners i have to look whats most profitable...

your miner with 1 gpu thread is nearly so fast like sgminer+xmrstak with 2 threads....im no coder or developer and i dont know shit about it, but if its somehow possible think about to implement mining with 2 gpu threads and your miner could the fastest ...

Don't worry, v11 will be better, I just need some time

[icallpurps]

why does Dwarfpool not work? and with the other pools it works?

Noticed the same thing with minexmr.com. Can't get it to work on this new version

[opelgtman]

why does Dwarfpool not work? and with the other pools it works?

Noticed the same thing with minexmr.com. Can't get it to work on this new version

It's working for me mining intense coin.  Make sure you use -allpools 1 option

[icallpurps]

why does Dwarfpool not work? and with the other pools it works?

Noticed the same thing with minexmr.com. Can't get it to work on this new version

It's working for me mining intense coin.  Make sure you use -allpools 1 option

Appreciate the fast response. Gave -allpools 1 a go, but no dice. quickly closes right after opening

[Mictlantecuhtli]

{"id":4,"jsonrpc":"2.0","error":{"code":5,"message":"Invalidnonce;isminernotcompatiblewithNiceHash?"}}