Claymore's CryptoNote AMD GPU Miner v11.3

[yatta]

There are a lot cryptonight miners around that a much better than Claymore's. So if he doesn't want to continue development - leave 0% fee and exit is a right move!

Name it.

[justoiurii]

There are a lot cryptonight miners around that a much better than Claymore's. So if he doesn't want to continue development - leave 0% fee and exit is a right move!

Name it.

https://github.com/xmrig/xmrig-amd/releases

[rednoW]

There are a lot cryptonight miners around that a much better than Claymore's. So if he doesn't want to continue development - leave 0% fee and exit is a right move!

Name it.

xmr stak
cast xmr
sgminer-gm 5-5-5
SRBminer

[dmwardjr]

Hi everyone,

I recently decided to switch all of my AMD rigs from ETH to XMR V7 on nano pool.

All of my R9 380's and R9 390's do fine when using Claymore Cryptonight GPU Miner (Latest Version for the fork).  However, my RX 480's and RX 580's do not work properly.  Only 4 [Sometimes 3] of the 7 cards for each rig mine while the others are 0.0 H/s.  This forces the rig to restart the mining process over and over again 4 times; then the rig shuts down.

I even tried switching from ssl to stratum with same results.

Is this Awesome Miner I'm using doing this or Claymore Cryptonight (latest version) on Awesome Miner?

Again, no issues with the R9 380's and R9 390's.  Only the RX 480's and RX 580's.

If someone happens to know the issue and how to fix it, I would certainly appreciate a point in the right direction.

Thanks,

David

[dmwardjr]

I am using Optiminer v212 also on Nanopool without issues.

Hi citronick,

I appreciate it.  However, I have 37 rigs and using Awesome Miner with all of them for easier management and monitoring.  Unfortunately, that particular miner is not pre-loaded on Awesome Miner.  I can upload mining software to the rigs that are not already in Awesome Miner but I was trying to avoid that for now.  Saving that as last resort.

I was looking on YouTube just before you sent your recommendation to see what's involved with setting up Cast XMR Miner 0.9.2 which is already on Awesome Miner.  So, I think I'm going to give it a try to see how it goes.

Thanks again for the quick response.

Happy Mining.

[citronick]

I am using Optiminer v212 also on Nanopool without issues.

Hi citronick,

I appreciate it.  However, I have 37 rigs and using Awesome Miner with all of them for easier management and monitoring.  Unfortunately, that particular miner is not pre-loaded on Awesome Miner.

I was looking on YouTube just before you sent your recommendation to see what's involved with setting up Cast XMR Miner 0.9.2 which is already on Awesome Miner.  So, I think I'm going to give it a try to see how it goes.

Thanks again for the quick response.

Happy Mining.

Hi David - sorry, optiminer v212 on ZEC - I misread the thread.
For XMR / Nanopool ... AMD RX470,480, R9-390 and R9-Nano, I use xmrig-amd-v2.5.2 (SMOS) without any issues.

[dmwardjr]

Hi David - sorry, optiminer v212 on ZEC - I misread the thread.

Okay, no worries...  I'm mining ZEC as well with my NVIDIA cards.  No issues at all with them.  Only my 480's and 580's with XMR.

Maybe I can get Cast XMR Miner 0.9.2 AMD GPU going shortly.

[dmwardjr]

There are a lot cryptonight miners around that a much better than Claymore's. So if he doesn't want to continue development - leave 0% fee and exit is a right move!

Name it.

xmr stak
cast xmr
sgminer-gm 5-5-5
SRBminer

Thanks for those recommendations.  I'll give Cast and SgMiner a go to see how they do.  I have a feeling Cast may suit me well.

[telep]

Hi everyone,

I recently decided to switch all of my AMD rigs from ETH to XMR V7 on nano pool.

All of my R9 380's and R9 390's do fine when using Claymore Cryptonight GPU Miner (Latest Version for the fork).  However, my RX 480's and RX 580's do not work properly.  Only 4 [Sometimes 3] of the 7 cards for each rig mine while the others are 0.0 H/s.  This forces the rig to restart the mining process over and over again 4 times; then the rig shuts down.

I even tried switching from ssl to stratum with same results.

Is this Awesome Miner I'm using doing this or Claymore Cryptonight (latest version) on Awesome Miner?

Again, no issues with the R9 380's and R9 390's.  Only the RX 480's and RX 580's.

If someone happens to know the issue and how to fix it, I would certainly appreciate a point in the right direction.

Thanks,

David

Hi David,

Take a look about oc settings on RX 480 and 580´s, these cards need more core mv on cryptonight than eth. It depends the core speed youre mining at.

For example, if you normaly mine eth @1180 and undervolt 800-850mV, in cryptonight V7 you need 950mV at least.
This is not meaning more power consumption, whereas cryptonight is less intensive algo than ethash.

Hope it fix your 0Hs problem with these gpus-

Regards.

[dmwardjr]

Hi David,

Take a look about oc settings on RX 480 and 580´s, these cards need more core mv on cryptonight than eth. It depends the core speed youre mining at.

For example, if you normaly mine eth @1180 and undervolt 800-850mV, in cryptonight V7 you need 950mV at least.
This is not meaning more power consumption, whereas cryptonight is less intensive algo than ethash.

Hope it fix your 0Hs problem with these gpus-

Regards.

Well, don't kick me in the arss when I tell you this but all of my AMD cards are STOCK.  Absolutely no MSI Afterburner or BIOS mod on the AMD cards.  I have used MSI Afterburner on all my NVIDIA 1080 ti rigs for ZEC to get 700 H/s for each card at 1340 watts for 6 card rigs.  But NOTHING has ever been done to my AMD rigs other than the Blockchain AMD driver update.

I have:
8 x NVIDIA 1080 Ti 6 card rigs - 48 cards
2 x NVIDIA 1070 Ti 6 card rigs - 12 cards
4 x AMD R9 380 6 card rigs - 24 cards
2 x AMD R9 390 6 card rigs - 12 cards
1 x AMD RX 580 7 card rig - 7 cards
4 x AMD R9 Fury 6 card rigs - 24 cards
16 x AMD RX 480 7 card rigs - 112 cards
TOTAL CARDS = 239 cards

I'm also currently in the middle of a mining room remodel at my house and about finished at my dad's house.  Which see:  https://bitcointalk.org/index.php?topic=2865914.0

I'm also getting a power upgrade from 225 Amps to 400 Amps the week of April 16th.

[telep]

Hi David,

Take a look about oc settings on RX 480 and 580´s, these cards need more core mv on cryptonight than eth. It depends the core speed youre mining at.

For example, if you normaly mine eth @1180 and undervolt 800-850mV, in cryptonight V7 you need 950mV at least.
This is not meaning more power consumption, whereas cryptonight is less intensive algo than ethash.

Hope it fix your 0Hs problem with these gpus-

Regards.

Well, don't kick me in the arss when I tell you this but all of my AMD cards are STOCK.  Absolutely no MSI Afterburner or BIOS mod on the AMD cards.  I have used MSI Afterburner on all my NVIDIA 1080 ti rigs for ZEC to get 700 H/s for each card at 1340 watts for 6 card rigs.  But NOTHING has ever been done to my AMD rigs other than the Blockchain AMD driver update.

I have:
8 x NVIDIA 1080 Ti 6 card rigs
2 x NVIDIA 1070 Ti 6 card rigs
4 x AMD R9 380 6 card rigs
2 x AMD R9 390 6 card rigs
1 x AMD RX 580 7 card rig
4 x AMD R9 Fury 6 card rigs
16 x AMD RX 480 7 card rigs

Well... i think you need to work some hours to optimize your rigs. It´s not so difficult and you´ll get much more hashrate and less power comsumption (this means longer life for your gpu´s too).

This is a present for you, a complete guide step by step to tune up your rigs:  https://mining.help
It´s writen to improve your ether rigs, but there´s a tab with the xmr/criptonight settings.

Regards.

[dmwardjr]

Well... i think you need to work some hours to optimize your rigs. It´s not so difficult and you´ll get much more hashrate and less power comsumption (this means longer life for your gpu´s too).

This is a present for you, a complete guide step by step to tune up your rigs:  https://mining.help
It´s writen to improve your ether rigs, but there´s a tab with the xmr/criptonight settings.

Regards.

Sweeeeeeeeeeet

Thanks!

Edit:  Yeah, I believe I recently saw this on Voskcoin YouTube channel and bookmarked it the other day.  I've been so busy with the mining room remodel at my dad's place and my place I simply haven't had time.

[bobben2]

Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully.
All my RX 570s hashing at 850-855H/s 
Claymore, you are the champ!

[telep]

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

[dmwardjr]

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

I can't get my 480's and 580's to work either.  Only 3 or 4 cards of the 7 card rigs will work then it quits.  R9 380's and R9 390's work fine.

I'm trying Cast XMR Miner now but can only get ONE card to work with it and none of the other cards show up.

[Ursul0]

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

yep. I've got this too:

Code:

GpuMiner dk2an0 failed -4

will likely need to lower my eth default settings - less fmem frequency, more voltage probably (I normally run dual eth on 850mv )

[telep]

Anyone with this error message?:

11:13:22:249   1e44   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:294   1628   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:296   17d4   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:365   1d88   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:381   1e5c   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:479   1e54   GPU 6, GpuMiner dk2an0 failed -4
11:13:22:491   1e4c   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:547   19b0   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:631   1e50   GPU 7, GpuMiner dk2an0 failed -4
11:13:22:635   1590   GPU 4, GpuMiner dk2an0 failed -4
11:13:22:674   1e58   GPU 6, GpuMiner dk2an0 failed -4
11:13:23:277   1320   GPU 0, dropped current job (cp 2-4)
11:13:23:324   1d7c   GPU 3, dropped current job (cp 2-6)
11:13:23:339   1e48   GPU 7, dropped current job (cp 2-2)
11:13:23:368   1e6c   Quit, please wait...

This is 8 RX580 8gb .

yep. I've got this too:

Code:

GpuMiner dk2an0 failed -4

will likely need to lower my eth default settings - less fmem frequency, more voltage probably (I normally run dual eth on 850mv )

In my case, im using 950 mv, and low core speed (1150mhz) but same error...

its possible other reasons?

[leo.sparrow]

We need Crypto-heavy.

+

[hunghcm]

Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully.
All my RX 570s hashing at 850-855H/s 
Claymore, you are the champ!

Can you give me the detail of config, thanks ?

[Call_Me_Bambi]

Query about shares and hashrate.

I've 2 cards a R9 270x 2GB and a RX 470 4GB, but I get less shares for the RX 470, should I not get a lot more shares with the RX 470, what's going on ?

Here are the figures, mining Stellite (XTL).

Card             Hashrate    Shares         Run Time
R9 270x 2GB   474 h/s      531 shares   4 hours
RX 470  4GB   852 h/s      486 shares   4 hours

Thanks.