dmwardjr
Legendary
Offline
Activity: 1302
Merit: 1318
Technical Analyst/Trader
|
|
April 08, 2018, 08:23:43 AM |
|
There are a lot cryptonight miners around that a much better than Claymore's. So if he doesn't want to continue development - leave 0% fee and exit is a right move!
Name it. xmr stak cast xmr sgminer-gm 5-5-5 SRBminer Thanks for those recommendations. I'll give Cast and SgMiner a go to see how they do. I have a feeling Cast may suit me well.
|
|
|
|
telep
Newbie
Offline
Activity: 13
Merit: 1
|
|
April 08, 2018, 08:36:06 AM |
|
Hi everyone,
I recently decided to switch all of my AMD rigs from ETH to XMR V7 on nano pool.
All of my R9 380's and R9 390's do fine when using Claymore Cryptonight GPU Miner (Latest Version for the fork). However, my RX 480's and RX 580's do not work properly. Only 4 [Sometimes 3] of the 7 cards for each rig mine while the others are 0.0 H/s. This forces the rig to restart the mining process over and over again 4 times; then the rig shuts down.
I even tried switching from ssl to stratum with same results.
Is this Awesome Miner I'm using doing this or Claymore Cryptonight (latest version) on Awesome Miner?
Again, no issues with the R9 380's and R9 390's. Only the RX 480's and RX 580's.
If someone happens to know the issue and how to fix it, I would certainly appreciate a point in the right direction.
Thanks,
David
Hi David, Take a look about oc settings on RX 480 and 580´s, these cards need more core mv on cryptonight than eth. It depends the core speed youre mining at. For example, if you normaly mine eth @1180 and undervolt 800-850mV, in cryptonight V7 you need 950mV at least. This is not meaning more power consumption, whereas cryptonight is less intensive algo than ethash. Hope it fix your 0Hs problem with these gpus- Regards.
|
|
|
|
dmwardjr
Legendary
Offline
Activity: 1302
Merit: 1318
Technical Analyst/Trader
|
|
April 08, 2018, 08:39:40 AM Last edit: April 08, 2018, 08:52:08 AM by dmwardjr |
|
Hi David,
Take a look about oc settings on RX 480 and 580´s, these cards need more core mv on cryptonight than eth. It depends the core speed youre mining at.
For example, if you normaly mine eth @1180 and undervolt 800-850mV, in cryptonight V7 you need 950mV at least. This is not meaning more power consumption, whereas cryptonight is less intensive algo than ethash.
Hope it fix your 0Hs problem with these gpus-
Regards.
Well, don't kick me in the arss when I tell you this but all of my AMD cards are STOCK. Absolutely no MSI Afterburner or BIOS mod on the AMD cards. I have used MSI Afterburner on all my NVIDIA 1080 ti rigs for ZEC to get 700 H/s for each card at 1340 watts for 6 card rigs. But NOTHING has ever been done to my AMD rigs other than the Blockchain AMD driver update. I have: 8 x NVIDIA 1080 Ti 6 card rigs - 48 cards 2 x NVIDIA 1070 Ti 6 card rigs - 12 cards 4 x AMD R9 380 6 card rigs - 24 cards 2 x AMD R9 390 6 card rigs - 12 cards 1 x AMD RX 580 7 card rig - 7 cards 4 x AMD R9 Fury 6 card rigs - 24 cards 16 x AMD RX 480 7 card rigs - 112 cards TOTAL CARDS = 239 cards I'm also currently in the middle of a mining room remodel at my house and about finished at my dad's house. Which see: https://bitcointalk.org/index.php?topic=2865914.0I'm also getting a power upgrade from 225 Amps to 400 Amps the week of April 16th.
|
|
|
|
telep
Newbie
Offline
Activity: 13
Merit: 1
|
Hi David,
Take a look about oc settings on RX 480 and 580´s, these cards need more core mv on cryptonight than eth. It depends the core speed youre mining at.
For example, if you normaly mine eth @1180 and undervolt 800-850mV, in cryptonight V7 you need 950mV at least. This is not meaning more power consumption, whereas cryptonight is less intensive algo than ethash.
Hope it fix your 0Hs problem with these gpus-
Regards.
Well, don't kick me in the arss when I tell you this but all of my AMD cards are STOCK. Absolutely no MSI Afterburner or BIOS mod on the AMD cards. I have used MSI Afterburner on all my NVIDIA 1080 ti rigs for ZEC to get 700 H/s for each card at 1340 watts for 6 card rigs. But NOTHING has ever been done to my AMD rigs other than the Blockchain AMD driver update. I have: 8 x NVIDIA 1080 Ti 6 card rigs 2 x NVIDIA 1070 Ti 6 card rigs 4 x AMD R9 380 6 card rigs 2 x AMD R9 390 6 card rigs 1 x AMD RX 580 7 card rig 4 x AMD R9 Fury 6 card rigs 16 x AMD RX 480 7 card rigs Well... i think you need to work some hours to optimize your rigs. It´s not so difficult and you´ll get much more hashrate and less power comsumption (this means longer life for your gpu´s too). This is a present for you, a complete guide step by step to tune up your rigs: https://mining.helpIt´s writen to improve your ether rigs, but there´s a tab with the xmr/criptonight settings. Regards.
|
|
|
|
dmwardjr
Legendary
Offline
Activity: 1302
Merit: 1318
Technical Analyst/Trader
|
|
April 08, 2018, 08:54:47 AM |
|
Well... i think you need to work some hours to optimize your rigs. It´s not so difficult and you´ll get much more hashrate and less power comsumption (this means longer life for your gpu´s too). This is a present for you, a complete guide step by step to tune up your rigs: https://mining.helpIt´s writen to improve your ether rigs, but there´s a tab with the xmr/criptonight settings. Regards. Sweeeeeeeeeeet Thanks! Edit: Yeah, I believe I recently saw this on Voskcoin YouTube channel and bookmarked it the other day. I've been so busy with the mining room remodel at my dad's place and my place I simply haven't had time.
|
|
|
|
bobben2
|
|
April 08, 2018, 09:22:29 AM |
|
Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully. All my RX 570s hashing at 850-855H/s Claymore, you are the champ!
|
Fellow miners, get your thens and thans in order and help other forum readers understand what you are writing. Remember the grammar basics: B larger THAN A (comparator operator). If something THEN ....
|
|
|
telep
Newbie
Offline
Activity: 13
Merit: 1
|
|
April 08, 2018, 09:23:29 AM |
|
Anyone with this error message?:
11:13:22:249 1e44 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:294 1628 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:296 17d4 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:365 1d88 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:381 1e5c GPU 6, GpuMiner dk2an0 failed -4 11:13:22:479 1e54 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:491 1e4c GPU 7, GpuMiner dk2an0 failed -4 11:13:22:547 19b0 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:631 1e50 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:635 1590 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:674 1e58 GPU 6, GpuMiner dk2an0 failed -4 11:13:23:277 1320 GPU 0, dropped current job (cp 2-4) 11:13:23:324 1d7c GPU 3, dropped current job (cp 2-6) 11:13:23:339 1e48 GPU 7, dropped current job (cp 2-2) 11:13:23:368 1e6c Quit, please wait...
This is 8 RX580 8gb .
|
|
|
|
dmwardjr
Legendary
Offline
Activity: 1302
Merit: 1318
Technical Analyst/Trader
|
|
April 08, 2018, 09:25:44 AM |
|
Anyone with this error message?:
11:13:22:249 1e44 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:294 1628 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:296 17d4 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:365 1d88 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:381 1e5c GPU 6, GpuMiner dk2an0 failed -4 11:13:22:479 1e54 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:491 1e4c GPU 7, GpuMiner dk2an0 failed -4 11:13:22:547 19b0 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:631 1e50 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:635 1590 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:674 1e58 GPU 6, GpuMiner dk2an0 failed -4 11:13:23:277 1320 GPU 0, dropped current job (cp 2-4) 11:13:23:324 1d7c GPU 3, dropped current job (cp 2-6) 11:13:23:339 1e48 GPU 7, dropped current job (cp 2-2) 11:13:23:368 1e6c Quit, please wait...
This is 8 RX580 8gb .
I can't get my 480's and 580's to work either. Only 3 or 4 cards of the 7 card rigs will work then it quits. R9 380's and R9 390's work fine. I'm trying Cast XMR Miner now but can only get ONE card to work with it and none of the other cards show up.
|
|
|
|
Ursul0
|
|
April 08, 2018, 09:51:35 AM |
|
Anyone with this error message?:
11:13:22:249 1e44 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:294 1628 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:296 17d4 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:365 1d88 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:381 1e5c GPU 6, GpuMiner dk2an0 failed -4 11:13:22:479 1e54 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:491 1e4c GPU 7, GpuMiner dk2an0 failed -4 11:13:22:547 19b0 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:631 1e50 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:635 1590 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:674 1e58 GPU 6, GpuMiner dk2an0 failed -4 11:13:23:277 1320 GPU 0, dropped current job (cp 2-4) 11:13:23:324 1d7c GPU 3, dropped current job (cp 2-6) 11:13:23:339 1e48 GPU 7, dropped current job (cp 2-2) 11:13:23:368 1e6c Quit, please wait...
This is 8 RX580 8gb .
yep. I've got this too: GpuMiner dk2an0 failed -4 will likely need to lower my eth default settings - less fmem frequency, more voltage probably (I normally run dual eth on 850mv )
|
|
|
|
telep
Newbie
Offline
Activity: 13
Merit: 1
|
|
April 08, 2018, 10:10:46 AM |
|
Anyone with this error message?:
11:13:22:249 1e44 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:294 1628 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:296 17d4 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:365 1d88 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:381 1e5c GPU 6, GpuMiner dk2an0 failed -4 11:13:22:479 1e54 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:491 1e4c GPU 7, GpuMiner dk2an0 failed -4 11:13:22:547 19b0 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:631 1e50 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:635 1590 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:674 1e58 GPU 6, GpuMiner dk2an0 failed -4 11:13:23:277 1320 GPU 0, dropped current job (cp 2-4) 11:13:23:324 1d7c GPU 3, dropped current job (cp 2-6) 11:13:23:339 1e48 GPU 7, dropped current job (cp 2-2) 11:13:23:368 1e6c Quit, please wait...
This is 8 RX580 8gb .
yep. I've got this too: GpuMiner dk2an0 failed -4 will likely need to lower my eth default settings - less fmem frequency, more voltage probably (I normally run dual eth on 850mv ) In my case, im using 950 mv, and low core speed (1150mhz) but same error... its possible other reasons?
|
|
|
|
leo.sparrow
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 08, 2018, 11:20:11 AM |
|
|
|
|
|
hunghcm
Newbie
Offline
Activity: 49
Merit: 0
|
|
April 08, 2018, 12:10:47 PM |
|
Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully. All my RX 570s hashing at 850-855H/s Claymore, you are the champ! Can you give me the detail of config, thanks ?
|
|
|
|
Call_Me_Bambi
|
|
April 08, 2018, 12:58:41 PM |
|
Query about shares and hashrate.
I've 2 cards a R9 270x 2GB and a RX 470 4GB, but I get less shares for the RX 470, should I not get a lot more shares with the RX 470, what's going on ?
Here are the figures, mining Stellite (XTL).
Card Hashrate Shares Run Time R9 270x 2GB 474 h/s 531 shares 4 hours RX 470 4GB 852 h/s 486 shares 4 hours
Thanks.
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
April 08, 2018, 01:03:43 PM |
|
Im kinda jealous you are getting 400 amps hahahaha. Have fun Btw I just installed an attic gable fan from quietcool, with auto thermostat and 10 speed auto change to extract air from my garage. I am pretty impressed actually. although its really expensive its super quiet and moves a lot of air. For me being quiet is factor number 1. Good luck in the remodel. For everyone else here, although there is a fee, may I kindly suggest checking out Zawawa's gateless gate sharp. Its still in dev but its pretty awesome. Havent compared speeds with claymore though.
|
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
April 08, 2018, 01:08:07 PM |
|
Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully. All my RX 570s hashing at 850-855H/s Claymore, you are the champ! SRBMiner does 900-950 with 1% fee. You should try it.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4508
Merit: 4084
what is this "brake pedal" you speak of?
|
|
April 08, 2018, 01:15:41 PM |
|
This is a present for you, a complete guide step by step to tune up your rigs: https://mining.helpIt´s writen to improve your ether rigs, but there´s a tab with the xmr/criptonight settings. nice guide. lot of detail. sent you a merit and an eth tip to the addy in your guide. tx details in a pm.
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
April 08, 2018, 01:48:49 PM |
|
Anyone with this error message?:
11:13:22:249 1e44 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:294 1628 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:296 17d4 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:365 1d88 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:381 1e5c GPU 6, GpuMiner dk2an0 failed -4 11:13:22:479 1e54 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:491 1e4c GPU 7, GpuMiner dk2an0 failed -4 11:13:22:547 19b0 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:631 1e50 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:635 1590 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:674 1e58 GPU 6, GpuMiner dk2an0 failed -4 11:13:23:277 1320 GPU 0, dropped current job (cp 2-4) 11:13:23:324 1d7c GPU 3, dropped current job (cp 2-6) 11:13:23:339 1e48 GPU 7, dropped current job (cp 2-2) 11:13:23:368 1e6c Quit, please wait...
This is 8 RX580 8gb .
yep. I've got this too: GpuMiner dk2an0 failed -4 will likely need to lower my eth default settings - less fmem frequency, more voltage probably (I normally run dual eth on 850mv ) In my case, im using 950 mv, and low core speed (1150mhz) but same error... its possible other reasons? Guys, have you tried -dmem 0 in your config I see this error before and were solved with this
|
|
|
|
kemo6600
Member
Offline
Activity: 130
Merit: 10
|
|
April 08, 2018, 01:52:57 PM |
|
Anyone with this error message?:
11:13:22:249 1e44 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:294 1628 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:296 17d4 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:365 1d88 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:381 1e5c GPU 6, GpuMiner dk2an0 failed -4 11:13:22:479 1e54 GPU 6, GpuMiner dk2an0 failed -4 11:13:22:491 1e4c GPU 7, GpuMiner dk2an0 failed -4 11:13:22:547 19b0 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:631 1e50 GPU 7, GpuMiner dk2an0 failed -4 11:13:22:635 1590 GPU 4, GpuMiner dk2an0 failed -4 11:13:22:674 1e58 GPU 6, GpuMiner dk2an0 failed -4 11:13:23:277 1320 GPU 0, dropped current job (cp 2-4) 11:13:23:324 1d7c GPU 3, dropped current job (cp 2-6) 11:13:23:339 1e48 GPU 7, dropped current job (cp 2-2) 11:13:23:368 1e6c Quit, please wait...
This is 8 RX580 8gb .
Check previous post , play with -h and -dmem parameter This version is not so easy to use because you have to adjust "-h" and "-dmem" values often, I will try to improve it soon. 1. "-dmem 1" requires twice more memory, make sure you have enough virtual memory. For example, if you have 6 GPUs 8GB, set virtual memory to 6*8=48GB. 2. Check how much memory miner allocates, it shows something like "(Memory used: 5128MB)", make sure you have this memory on your GPU. 3. You can see low hashrate if you use almost all memory on GPU, try to reduce "-h" value a bit.
Guys if you are getting the "GpuMiner dk2an0 failed" error, be sure to note Claymore's comments above. I was initially getting the same error with my RX480 8GB rig. Lowering to -h 1024 will solve the issue but make the program only see 4GB on my cards. After changing page file to 48GB, the miner runs beautifully with default -h and -dmem settings. Ellesmere RX480 8GB, same modded BIOS, default miner settings: CryptoNote Miner 9.7 - 850 H/s CryptoNote Miner 10 - 987 H/s Thanks Claymore!
|
|
|
|
ejonesss
Newbie
Offline
Activity: 3
Merit: 0
|
|
April 08, 2018, 01:54:24 PM |
|
i tried to download from mega but it sais i need flash (a very insecure platform) so i tried google drive
google drive said the files was a virus
i found a workaround you have to copy to your drive then download.
chrome may say it is infected click keep infected fiile.
it may be because i am using an older version of chrome on osx 10.7.5
the suggestion: you may want to try double zipping or even triple zipping (file.zip.zip file.zip.zip.zip)
password protect the downloads and post the password*
*= i just read on google that password protecting may not work as some programs may be able to see through encryption.
you could pack it in an installer package and encrypt that.
|
|
|
|
bobben2
|
|
April 08, 2018, 02:03:42 PM |
|
Now using Claymore 11.3 mining Monero with -pow7 1 and it works wonderfully. All my RX 570s hashing at 850-855H/s Claymore, you are the champ! Can you give me the detail of config, thanks ? Sure, this is my command line NsGpuCNMiner.exe -pow7 1 -h 928 -dmem 1 -xpool stratum+ssl://europe.cryptonight-hub.miningpoolhub.com:20580 -xwal bobben.%computername% -xpsw %computername% The above -h value is for 4 gig cards. If you hasve 8 gig cards, then you can set that value higher. I use OverdriveNTool to set gpu core clock (P7) to 1150 and mem (P2) to 2000.
|
Fellow miners, get your thens and thans in order and help other forum readers understand what you are writing. Remember the grammar basics: B larger THAN A (comparator operator). If something THEN ....
|
|
|
|